The two exchanged a few words, and Ye Ting immediately started her work.

"The focus on the ground floor is the floor, especially the floor of the counting section. Gu Fei, even if you are renovating machine tools or others, you have to find a way to ensure that the ground on the entire first floor is dry and clean. ”

"What's the matter?" Gu Fei asked.

He remembered that he had explained it to Ye Ting, and he didn't believe that she forgot it so quickly.

Ye Ting glared at Gu Fei a few times and explained in detail.

"The company will improve the confidentiality requirements of production technology and technology, and enhance the confidentiality concept of all employees. In the future, almost all products, especially the production process of high-end series products, will no longer be sent out and will not be allowed to be touched by outsiders.

Therefore, including your manufacturing workshop on the first floor, the workshop will be remodeled, and all windows will not be allowed to be opened in the future, and one-way fluoroscopy will be added. Therefore, the floor of the workshop can not wait for the slow air drying. ”

Gu Fei understood. He wiped his sweat and asked with an ugly face: "It's understandable that the company wants to keep it secret, but you're not afraid of the heat killing the workers outside?"

Ye Ting glanced at him again, and said angrily: "What is this called? Of course, we will install the air conditioner for you together." ”

Gu Fei nodded and didn't say anything more.

It is said that the mouth is moved at the top, and the foot is broken at the bottom.

Since there was such an arrangement above, Gu Fei had no choice but to use his brains to find a way to treat the problem of leakage from the machine outside.

Some domestic machines have been repeatedly complained about quality problems, which is actually very reasonable.

Not to mention the machining accuracy, just taking the simplest cooling circulation system can make people complain constantly.

As soon as some machines are turned on, the cooling system has just started, and soon the ground is full of coolant flowing out or splashing out, which is troublesome and wasteful, and it is a headache.

Gu Fei once took a few machines apart and looked at them, and was speechless for a moment.

There are many reasons for this.

Some of them are unreasonable in the design of the reflow system.

Many designers or design teams have probably only seen the structure of the machine on the computer, patted their heads and started to design, but never really used the machine they designed.

Gu Fei has seen a lot of cheating designs. Some of them don't even have a good observation window. The surface workmanship looks elegant and pleasing to the eye, but as soon as the machine is turned on, the viewing windows on the left and right sides of the machine desperately slide out under the coolant.

It's like just buying a car with a sunroof, and it looks good. However, as soon as it rains, the skylight will leak in and out.

In addition, the output power of the cooling pump and the mechanical energy of the fluid are never considered. As soon as the flush system is turned on, the coolant flies through the recovery tank and splashes out of the machine. This is not bad, and some even directly inject into the transmission screw, which seriously affects the machining accuracy or directly causes a short circuit in the machine.

For this reason, Gu Fei also ordered that no one should be allowed to use the rear flush system.

The reason why some machines leak coolant is that the welding technology between the fuselage box is not up to par, or the material of the machine tool itself is too thin, and it is directly scraped through by various debris and slag every day.

Of course, there are those that are too rudimentary in design, and there are those that are too elaborate.

Delicate seems to be a compliment, but sometimes it's not a good thing to be overly sophisticated.

For example, the five machining centers that I just bought look like a fortress as a whole. There are walls and roofs, doors and windows. However, there are too many normal machining centers without a "roof", and most of them are empty except for the spindle and tool magazine.

I remember one day Gu Fei calmly called over and asked the sales manufacturer why it was designed like this.

The other salesperson was very proud.

"It's a design that's unique to our company. He said triumphantly about the road.

"With the addition of a roof, the whole machine looks more compact and modern. The second is to respond to the call of the country to reduce air pollution. Haven't you noticed other machining centers that don't have a "roof" where the coolant escapes when the tool blows off or vaporize......s?

Gu Fei was furious, and directly squirted: "Yi a yarn." All I know is that you sealed the machine so that all the gas in it couldn't get out. As soon as the processing is completed, the work door is opened, and all his yards are sprayed to the front. ”

The other party was dumb on the spot and was speechless for a long time.

In the end, Gu Fei sent a message to the spy, "Hurry up and send someone over to remove the "roof" on the machine for me, otherwise you will transport them back." ”

Straight to the point.

"Trouble!" Gu Fei sighed.

But everything is the same in the world, as long as you want to find it, there are always more ways than difficulties.

He took the workbook, went out and registered all the machines one by one, and then decided on the modification of the modification, the repair of the repair, the rewelding of the rewelding. Some are particularly bad, Gu Fei simply designed a large tray to load the entire machine into it.

Ye Ting followed alongside, nodding as she walked, listening carefully to how Gu Fei was going to solve the problem of leakage from the machine.

It didn't take long for the two of them to come to the side of the thirteenth counting car.

"What's going on? The machine is broken?"

Ye Ting was a little dumbfounded when she saw the fault warning sign hanging on the machine and Zhang Dahai disassembling the machine.

Gu Fei nodded, and hurriedly walked over to watch when he saw Hunter's heart.

"What's going on now?" he asked, putting on his gloves.

"As you might expect, the rollers of the bearing are broken. Zhang Dahai's face turned a little purple and said, "But I can't find a way to remove it." ”

"Huh?" Gu Fei was dumbfounded, and said suspiciously: "Didn't the explosion picture just now introduce how to disassemble and assemble?"

As soon as he finished speaking, he came to his senses.

There are a lot of things that I haven't really touched, so I don't have any impression at all. The exploded image on the computer is easy to see at a glance, but it doesn't matter how important it is. It's normal that Zhang Dahai didn't notice it.

"Look at it!" Gu Fei reminded, he picked up the special driver, gently put it into the bearing and clamped it tightly, "Hold it down, keep the balance and the angle of 120." Counterclockwise outward force. OK, it's down!"

Zhang Dahai, who had been tossing for most of the day but in vain, looked at the bearings that Gu Fei had successfully removed, burst into tears and was speechless.

Ye Ting was overjoyed in the back, but she smiled and hurriedly reminded him: "Gu Fei, be careful of your clothes." ”

Clothes?

Gu Fei was stunned for a moment, quickly realized his current responsibility, and hurriedly stood up and said to Zhang Dahai: "You go on." I have other jobs. ”

After speaking, he walked away with Ye Ting.

Now Gu Fei is in charge of the entire first floor, in addition to counting cars and machining centers, there are other departments.

The two of them carefully walked around, counted all the places to be repaired, and returned to the general production office again, and more than two hours had passed.

"You used to say that I was slow to check, what do you think now?"

Ye Ting estimated that she had premeditated, and as soon as she returned to the office, she pointed to the clock on the wall and asked Gu Fei with a smile.

Gu Fei nodded sensitively, let out a long sigh, and said convincingly: "Very good, very powerful!"