Shortly after I went to work the next day, two large barrels of hot herbal tea were sent to the counting department.

Gu Fei also joined in the fun to get a bottle, but poured it down in one go, not only bitter to his face, but also hot to his sweat.

Gu Fei frowned, and hurriedly got some mineral water to rinse his mouth. He turns around and prepares to accuse Pepper of his crimes. I just saw that everyone was drinking happily, and they looked satisfied, so they silently endured it again.

At this time, after Gu Fei's busy work for more than a day yesterday, most of the fifteen counting cars in the entire counting department, except for the machines that are full-time processing copper materials, have been opened.

When passing by several cars, there was a rumbling everywhere, colorful indicators flashing one after another, and there was a hot scene everywhere.

Gu Fei looked at his masterpiece with satisfaction, and turned his head to walk towards Pu Mill.

Soon, Gu Fei took over the fixture he designed yesterday from the master of the ordinary milling machine, chose an idle lathe, and began to install the fixture.

Clamping is also a kind of technical work, it can not be clamped casually like ordinary materials. Generally speaking, after the fixture is installed, it is necessary to ensure at least the perpendicularity and concentricity of several main axles, and sometimes some other more complex parameters.

The concentricity of the fixture in front of you is well guaranteed when it is installed, after all, the three-jaw chuck of the lathe has an automatic centering function. However, the verticality is more troublesome, when the character is good or the installation is skillful, it will be installed in a few clicks; when the character is not good, whether you knock up and down, the right pad is grinding, the calibration table is always very different.

The so-called calibration gauge is also known as a dial gauge or dial gauge, which calibrates a lot of things. For example, whether a plane is water or vertical, whether a circle is a standard circle, or even whether the two holes are concentric, etc.

Now Gu Fei pretended to be angry, he gritted his teeth and stared at the school watch tightly, wondering if it was broken, otherwise why would it beat so much.

Originally, Gu Fei gave himself a goal, requiring that the perpendicularity between the installed fixture and the spindle should not be greater than 3 wires, and later it was raised to 5 wires, that is, the thickness of a piece of paper.

As a result, before he knew it, he poured a few bottles of herbal tea and installed them over and over again, but he was still far from meeting his own standards. The beating on the school table, not to mention 5 wires, is 50 wires.

"One, one, one!!" Gu Fei, who was so angry that he was dizzy, could only ask for help.

Number One arrived, and as always, a calm, mechanical voice rang out.

"It's also fairly normal. It may be the reason for your irritability, of course, it is more likely to be the cause of the machine, you have to rule them out one by one. In this way, you first find a standard part to install on the spindle and clamp it, and use the calibrator to check whether the spindle beats too much, if it is large, the machine should be repaired. If it's not big, then hit the clamp ......"

Gu Fei, who had no clue, had no choice but to endure his irritability and follow the prompts of No. 1 one by one.

A few minutes later, he walked to the general milling department with a blank face and carried the heavy fixture, and slammed it on the shelf.

Several general milling masters looked over in surprise, and someone hurriedly said: "What's the matter?"

Gu Fei has a good temper, but no matter how good his temper is, he can't help but get angry at this time. With his trust in these masters, he didn't test whether the fixture was good or bad, and as a result, he wasted more than two hours to install a fixture, and in the end he found himself busy in vain.

"What's wrong?" Gu Fei pointed to the fixture and said coldly: "Whether this thing is qualified or not, you know it in your own hearts." No matter what you have in mind, I don't want to care about it, and I can't control it. I'm just going to say one thing here, if you can change it, you can change it quickly, and if you can't change it, you should do it again. ”

Gu Fei gave them a message: "At the latest this afternoon, I want to see a qualified fixture." Otherwise, don't blame me for being unkind. ”

After speaking, Gu Fei didn't pay attention to their explanations, turned around sharply with a calm face and left directly.

was thrown by a little kid, and the faces of several general milling masters were all scornful, but Gu Fei at this time was fully qualified to give them faces.

No matter how depressed they were, they had to endure it, and not only did they have to endure it, but they also had to fix the fixtures quickly.

Back in the counting cars, Gu Fei slipped around one by one, checked a few products, and walked to his desk to blow up the electric fan.

When the machine is working properly, it is actually very easy to be a technician. No one will care about you at all, you can do whatever you like.

It's just that Gu Fei hasn't rested for a while, and Zhang Li hurriedly came to him with paper drawings.

"Gu Fei, is this product ready?" Zhang Li hurriedly handed over the drawings in her hand and stared at him nervously.

Gu Fei hurriedly took it, and looked down to see that it happened to be the batch of products codenamed G850A.

He couldn't help but secretly complain, so he had to say: "Sister Li, this live fixture hasn't been done yet, and I can't start work." But if I can get the fixtures right in the afternoon, I'll be able to make them in no time......"

Gu Fei was arguing, but Zhang Li breathed a long sigh of relief, she patted her little chest and said again and again: "It's really scared to death." It's okay, it's okay, it's best if you don't start work. ”

Gu Fei, who was confused by the second monk, looked at her in shock, suspecting that he had heard it wrong.

"It's best not to start? Gu Fei couldn't help but ask.

Zhang Li was stunned for a moment and explained: "I don't know what happened. Just got a call from upstairs. They informed me that this shipment was waiting for the time being, as if something had to be changed, and that we should not move. ”

Gu Fei understood, so he had no choice but to shake his head speechlessly and said, "This designer is too." What would they do if I had the product done now......"

Zhang Li grinned and said, "They have always been like that. This has happened several times before, and once it was a big fuss. ”

"Oh, what happened later?" Gu Fei was very curious, he craned his neck and said interestedly, "We shouldn't be to blame for this." ”

"Hee-hee, it's hard to say, that time was also unlucky. Zhang Li shook her head and continued: "That time, the list above did not write the quantity. How efficient it is to count cars. After receiving the order, I made all the products in one go. I think there are more than 100 pieces. Later, I learned that the design department was only going to let us change a dozen pieces. So......"

Zhang Li smiled and didn't say any more, she knew that Gu Fei could imagine the fight between the next few departments.

"That shipment, although not in large quantities, was said to be quite expensive. As a result, several cars went down a few times, and all of them were scrapped. Later, I heard that the design department, engineering department, production department and sales department all jumped to their feet. Haha......" Zhang Li didn't have the slightest sense of corporate ownership, and laughed heartlessly.

"Then how much does this G850A want us to process?" Gu Fei hurriedly picked up the drawing and looked at it carefully, and the number of 112 was clearly written on the title bar.

He raised the drawing and asked, "Is there a mistake with the number 112?"

As he spoke, Gu Fei was also skeptical: "Since you are still designing, do you really need to change it to hundreds at a time?"

Zhang Li leaned over and looked at it a few times, and said categorically: "This is the drawing handed down from above, whether it is right or wrong, they are responsible." Don't be afraid, you just do it. ”

She paused, then added a few more words apologetically.

"But now that the news from above is suspended, you should not do it for the time being. It's just that I'm sorry, and I don't know when they will notify these pit goods, and your conversion can only be delayed. ”

Gu Fei didn't care, the two chatted a few more words, and Zhang Li returned to the office.