As soon as I went to work in the afternoon, the master of general milling hurriedly sent the fixture over.

In front of Gu Fei, who looked weird, they honestly tested a few parameters, and only after getting approval did they leave with concern.

The fixture was ready, but unfortunately he didn't know when it would be used, so Gu Fei could only put it on the fixture frame with a smile.

When he returned to his desk, Gu Fei saw Zhang Li and Wu Gong waiting for him.

Gu Fei was a little puzzled, Zhang Li could understand that he was looking for him, Wu Gong would actually come over, which was a strange thing.

"Yo, good two, but what's the matter?" Gu Fei smiled at Zhang Li, he squinted at Wu Gong next to him, and said, "Now it's the time to go to work, don't talk about personal matters." ”

As soon as Wu Gong heard this, the small universe was about to explode, so he said angrily: "Of course I'm talking about business when I came over. ”

Gu Fei looked surprised and said with a smile: "This is unusual. I remember someone saying that meeting and working in person is not in fashion, and sooner or later it will be eliminated. ”

Wu Gong was stunned, and suddenly gritted a few teeth, but he didn't know what to think, so he endured it in a daze.

He glared at Zhang Li, who was pretending to be dead next to him.

Zhang Li had no choice but to speak: "Gu Fei, that's the case." The customer reversed and said that there was some problem with the shipment. So I need you to check it out. ”

"What is the guest reverse?" Gu Fei asked in surprise.

Zhang Li almost bit her tongue and said speechlessly: "It's customer feedback or customer feedback." ”

Gu Fei suddenly realized, but he pointed to the flickering machine not far away suspiciously, and said, "The goods I made are still here." The goods sent out must not have been made by me, and it is my business if something goes wrong?"

Wu Gong sneered: "Now you are in charge of the number of vehicles, it's none of your business, whose business is it?"

Gu Fei glared at him and said mercilessly: "Don't think that I haven't read the company's "Regulations on the Handling of Defective Products". I am not responsible for the problems that arise when I am not in shift. However, according to the leadership responsibility system, you have to be responsible for 30% of the responsibility. ”

Wu Gong was a little dumbfounded.

He really didn't expect Gu Fei to even notice these regulations, and he wanted to come over and intimidate him to vent his evil anger, but instead choked himself so much that he had nothing to say.

Zhang Li hurriedly said to the mud: "This is a problem with the previous car department, if you want to punish it, you will definitely not be punished Gu Fei." But now that the problem has arisen, we need to solve it as soon as possible instead of passing the buck to each other. If it can't be solved, the fine will not be talked about for now, at least everyone will pay attention next time. ”

Gu Fei didn't speak.

Soon Zhang Li found the quality control Chen Xiaotian, and the group of four walked upstairs with a ghost fetus.

The entire company of Fenghuo Laser Technology is in one building. Generally speaking, most of the products processed on the following floors are self-produced and sold, and they have been moved to the fifth floor to form a complete product, and then sold out.

Therefore, the guest in Zhang Li's mouth is usually just a phone call from the management of the upper floor.

When I got to the third floor, I pushed the door and went in, and the air conditioning was sufficient.

Several assembly lines are running, and rows of young and beautiful girls are sitting on the edge of the assembly line and are busy quickly.

Soon, a woman about thirty years old greeted her, and Gu Fei glanced at the work card on her chest. It turned out that she was Ou Sha, the vice president of the electronics department, and it seemed that she was a figure of the same level as Wu Gong next to her.

Zhang Li frowned, feeling that something was wrong.

In the past, when she came up, she was usually received by someone like an elongated assembly line. This time it was actually the vice president, and it seems that it is a little troublesome to deal with this time.

Wu Gong hurriedly went up to answer, but Ou Sha didn't seem to hear it at all, and didn't answer him at all.

Without saying a word, she led the four of them to an assembly line and told a couple of girls sitting next to her to walk away, pointing heavily at a pile of small parts that had just been unpacked.

"We took a random 5 percent of the products and found that all of them had the wrong shaft diameter," she says. Take a look, we're in a hurry. ”

Chen Xiaotian came down and hurriedly looked for drawings.

Gu Fei stretched out his head to take a look, only to see that this product was called a swimming shading block. The disadvantage pointed out by Osha is that there is a small round shaft above, and the main size is only in the floating range of plus or minus 3 wires.

Chen Xiaotian hurriedly took two micrometers and gave them to Gu Fei. The two of them measured one by one.

Soon Chen Xiaotian made a bitter face, he looked at Gu Fei and said, "The size is a little bigger, it needs to be equipped with a hole, it is estimated that it will not be able to pass." ”

Gu Fei nodded, he also saw it, and after thinking about it carefully, he understood what was happening.

Ou Sha quickly walked back again, she looked at the four of them, and finally fixed her eyes on Gu Fei, and asked, "How are you going?"

Gu Fei didn't answer, but put on his gloves first, took the electronic caliper and measured it in front of Ousha, and said, "Mr. Ou, look, this size just reaches the upper limit of the range marked in the drawing. However, this is the size of the product after processing and then five surface treatments, and it is normal to reach the upper limit or even a larger point. The shaft is larger, and the holes over there also need to be surface treated, and they will be smaller. As soon as the two aspects are added up, the difference is a bit big, and it is normal to not get by. ”

Gu Fei glanced at Chen Xiaotian on the side and continued: "In this case, first, the reason is the design department. They should have designed with the finish in mind, and they were negligent and still dimensioned so tightly.

The second is the problem of technology. The person who designed the process may also not pay attention to the surface treatment, and the size of the CNC machining is not normal. For example, the shaft should be made smaller, the hole should be larger, and then after surface treatment, it will be just right. '”

Ou Sha listened patiently, and when Gu Fei stopped talking, she waved her hand and said coldly: "I don't understand and don't want to know whose problem it is, I just want to know what to do now? Can I repair it? I have to use it in the next two days." If I can't, I'll write a return order. ”

When a few people heard this, they were immediately under a lot of pressure, and hurriedly stared at Gu Fei's straw like a drowning person.

Under the return order, usually the fine will follow. The order in front of him is quite large, and among the four people, Chen Xiaotian and Wu Gong, the quality control, will have a tragedy.

Gu Fei stared at Ousha and asked, "Can you delay it for a few days?" Even if we go to the machine immediately to make changes, and then go to various surface treatments, we really can't catch up in a day or two. ”

Ousha shook her head without hesitation, and said expressionlessly: "If it can be relieved, it will not be me who will receive you." All along, all kinds of things on the first floor of you have dragged on too much, and I will definitely not bear it this time. If you still can't do it well within two days, I will definitely write a return form, and you will do it yourself. ”

Gu Fei was a little hesitant when he heard this, he wanted to pit Wu Gong, but he didn't want to involve poor Chen Xiaotian.

After thinking about it, Gu Fei sighed and said, "Don't worry." We discuss it and find someone to deal with it as soon as possible. ”

Osha nodded, and left again with a blank face.

"Gu Fei," Wu Gong's face was scornful, and he finally said with a stiff face: "This batch of goods is going to be repaired, and your salary is ...... It's negotiable. ”

Gu Fei glanced at him indifferently and did not reply.

After a while, he said: "It's really not difficult to fix this little problem, but once this batch of goods is sold, the quality is difficult to say." Do you really want to do that?"

The three of them were stunned for a moment and asked, "Why do you say that?"

"We now have two methods, one is to force the axle into the hole with lubrication, and the other is to immediately take back the number of cars to turn the axle or grind it smaller. However, in this way, there is no surface treatment on the shaft, and it is easy to rust or bloom in the future. ”

"Look at the name of the product, swim the shading block. As soon as the name suggests, it should be able to move smoothly back and forth through the hole. With the above method of installation, it can be handled at the moment, but I'm afraid it won't move in a few months. ”

Several people looked at each other.

Gu Fei said again: "You mentioned this machine Zhang Li, it seems to be an export product." In this way, our domestic goods should be scolded by foreigners again. Are you really going to do that?"