The matter of individual business licenses can only be put aside for the first time. Lan Wufeng said that he could also sneakily sell these small goods in the market in the same way as before, as long as he brought less goods with him at a time. When you really encounter industrial and commercial law enforcement, it is a big deal to hand over a canvas bag electronic watch, and the loss is also within the range that you can bear.

After Lan Wufeng left, Lin Zhenhua wrapped the money sent by Lan Wufeng in newspaper and stuffed it into the box under the bed. With such a large sum of money, he can't take it to the bank to deposit, because the bank's savers themselves are very gossipy, if he takes a few thousand yuan to deposit, it is estimated that half of the people in Fenghua County will know about it the next day.

For his sister Xiaofang, Lin Zhenhua did not disclose the situation of making money, first, he was afraid that Xiaofang would not be strict and tell his best friend, and secondly, he was worried that once Xiaofang knew that there was such a large amount of money at home, I was afraid that it would be unsound to sleep at night. He took out a few hundred yuan from the pile of money, handed it to Xiao Fang, and told her that it was the money for the family's meal. Xiao Fang didn't have any special feelings about this, she had just extorted more than a dozen different styles of electronic watches from Lan Wufeng, and she was thinking about which watch to give to which good friend, and how could she still have time to think about money in her mind.

"Brother, I took so many electronic watches from Lan Wufeng, you won't blame me, right?" Lin Fanghua asked wistfully.

"It's okay, you can take it if you want."

"I wanted to give it to my classmates. In the past, when you were not at home as a soldier, they took good care of me, and I never had anything to repay them. Lin Fanghua explained.

Lin Zhenhua stroked his sister's hair with his hand, and said with a smile: "You just send it, I don't blame you." These watches don't add up to a few dozen dollars, as long as you're happy. ”

"Brother, is our family particularly rich now?"

"From the perspective of personal family life, it is indeed quite rich."

"What's the angle?" Lin Fanghua asked.

"People live a lifetime, they can't just think about eating and sleeping, they have to have a career. If you want to start a business, this money is far from enough. Lin Zhenhua said.

"Brother, what do you want to do?"

"It's hard to say right now." Lin Zhenhua said, in fact, he really didn't think too much about it, but vaguely felt that as a traverser, he should have some achievements, but as for what this achievement was, he didn't think clearly.

The next day, Lin Zhenhua still stepped on the bell to go to work and walked into the workshop. As soon as he entered the workshop, he was startled, only to see that in the corner of the workshop, a glass room was erected, and a small carpet was laid at the door. Through the glass wall, Lin Zhenhua could see that it was the MK800 given by Spischer that was put inside.

"Xiaolin, how is it, do you think it is appropriate for us to arrange CNC machine tools like this?" Luo Qinsheng walked up to Lin Zhenhua and asked proudly.

"Director Luo, where did this glass house come from?"

"Of course we built it." Luo Qinsheng said in a reasonable tone, "When we were on the train, Lao Fan gave us a lecture. He said that the CNC machine tool is to install a computer in the machine tool, and the computer controls the work of the machine tool......"

"That's right." Lin Zhenhua said.

"That's right!" Luo Qinsheng said, "I have seen it at the Provincial Computing Center, and their computer room is like this, with a glass house with rubber mats and a carpet at the door. Therefore, as soon as we came back, we started to work on this thing, and with Director Zhu in charge here, it was done in two days. ”

Lin Zhenhua scratched his head: "Well, actually, let's not be like a big enemy." The CNC machine tool is just a circuit board, and it is not much different from the ordinary electrical appliances in our home. As long as the machine is grounded a little better and stale electricity is avoided, it doesn't matter. ”

"No matter, the glass house has already been built anyway, and now it's waiting for you to start." Luo Qinsheng said.

"Now it's decided who will make the CNC machine tools?" Lin Zhenhua asked.

"It's decided, Master Peng Gang, the squad leader of the milling class, will do it, and then Yang Xin will be his apprentice." Luo Qinsheng said, "By the way, Xiaolin, it is said that Yang Xin was recommended by you." ”

Lin Zhenhua hurriedly explained: "Director Luo, I just said that Yang Xin is relatively young, and he may accept new things faster. I don't mean to have to do it with Yang Xin. ”

"Forget it, Xiaolin, I don't know your crooked mind yet?" Luo Qinsheng said disdainfully, "You go to the container workshop to inquire, who doesn't know now that Lao Yang plans to recruit you as a son-in-law." ”

"I'm dizzy......" Lin Zhenhua burst into tears.

The MK800 had just been pulled back from the train station the day before, and under the command of Fan Shibin, several workers carefully unwrapped it and placed it in a small glass room. Luo Qinsheng ordered that no one except Lin Zhenhua, Peng Gang, and Yang Xin should touch this sacred machine.

Although you are not allowed to touch it, it is still allowed to take a look. For a whole day, the workers of the metalworking workshop took turns lying outside the small glass room to observe the machine tool, and they were all amazed. This is a very different machine from all the machines in the workshop, and the whole equipment is wrapped in a painted shell with foreign characters written on it that no one knows. On the left side of the machine, there is a small display screen, below which are dozens of buttons, no one knows what these buttons are for, but when you look at it, you feel so mysterious and so advanced.

"Xiaolin, do you think we need to prepare anything?" Peng Gang, the leader of the milling squad, came over and asked Lin Zhenhua for instructions. Behind him, followed Yang Xin, who was timid but couldn't suppress his excitement. Lin Zhenhua clearly saw that on Yang Xin's right wrist, there was an electronic watch with a red strap, which was obviously given to her by Lin Fanghua overnight. At this moment, Yang Xin raised his eyes to look at Lin Zhenhua, and found that Lin Zhenhua was staring at his wrist, and hurriedly put his hands behind his back, showing a mischievous smile to Lin Zhenhua.

When Lin Zhenhua saw the girl's bright smiling face, he immediately felt refreshed, and he said happily: "You don't need to prepare anything, we can start working." ”

Peng Gang took out the key, opened the door of the glass hut, and then made a gesture to Lin Zhenhua, signaling him to go in first. Peng Gang is the best miller in Hanhua Machinery Factory, 30 years older than Lin Zhenhua, but at this moment, he has a sense of respect like an apprentice seeing a master in front of Lin Zhenhua. He knew that the 19-year-old young man in front of him was the only one in the factory who could open this mysterious machine tool, and with his own intelligence, he convinced the Americans, so that the Americans gave this machine tool to the Hanhua factory.

Lin Zhenhua was not overly humble and was the first to walk into the hut. Luo Qinsheng, Peng Gang, Yang Xin and others rushed in, standing on both sides of the CNC machine tool, waiting to see Lin Zhenhua's demonstration. Outside the glass house, a group of workers gathered around, all waiting to see how the CNC machine tool worked.

Lin Zhenhua smiled at Luo Qinsheng and others, and said: "You don't have to be nervous, in fact, the CNC machine tool is far simpler than the traditional machine tool, it uses a lot of work to control the program, we only need to set a specific program, then those complex tools, feed and other work, can be handed over to the machine to complete automatically." Let's see, let me show you how to mill a keyway. ”

As he spoke, he clamped a workpiece on the chuck, and then began to press the keyboard to select the instructions to make, he pressed and explained, Peng Gang and Yang Xin came forward, listening nervously while recording in the small notebook, but their faces were glowing with excitement.

After Lin Zhenhua set the relevant parameters, he pressed the start button, the machine tool whined, the milling cutter flew around, the workpiece advanced and retreated freely, and the iron shavings cut out automatically fell into the waste chute, and the whole processing process was like flowing water.

"Great!" Peng Gang exclaimed, "This is simply more delicate than a human hand." ”

"Of course, it's computer-controlled, and it's much better than a human hand." Luo Qinsheng said to Peng Gang with a smile.

Lin Zhenhua shook his head and said: "Actually, it's not like this, at least so far, computers can't replace people." When it comes to machining, the best CNC machines can't match the machining accuracy of a good mechanic. ”

"That's right." Luo Qinsheng said, "Take Master Zhou Houcheng in our workshop as an example, he processes a plane, as long as he touches it with his hands, he knows which place is flat and which place is uneven, which is more accurate than measured with calipers." I don't think I can learn a computer. ”

"Come on, Master Peng, you can try it too." Lin Zhenhua gave up his position to Peng Gang.

Peng Gang stepped forward and stood in front of the MK800. The 30-year-old miller's hands were covered with sweat, and his face was a mixture of excitement and timidity.

"Master Peng, let me explain it to you, come and see, this is the control panel, you have to ...... first" Lin Zhenhua began to explain various setting methods to Peng Gang little by little on the panel, these buttons are written in English, Peng Gang can't recognize a few, but Lin Zhenhua explained to him the setting method, he understood it as soon as he heard it.

CNC milling machines are still milling machines, and what needs to be done is still those operations, which are just turning people's working processes into computer programs. Lin Zhenhua said while Peng Gang tried it himself, and after several twists and turns, a qualified keyway was finally processed.

"Oh, I'm so tired." Peng Gang wiped the sweat on his head, with joy on his face, and said: "I am not so tired of milling 20 keyways on the universal milling machine." ”

"I see you've only pressed the button a few times, why are you tired?" Luo Qinsheng asked with a smile.

"This thing is really good, as long as you learn to press these buttons, even the most difficult workpiece can be machined." Peng Gang said with emotion.

Luo Qinsheng said: "Okay, Master Peng, Yang Xin, the two of you will be apprentices with Xiaolin from today onwards, and you must master the use of CNC machine tools as soon as possible." In the future, when our country has money, our workshop will replace all the machine tools with numerical control, and at that time, the two of you will replace Xiaolin and be everyone's masters. ”

Peng Gang smiled: "I'm hopeless, I'm 49 years old, and I'm going to retire in 10 years." Yang Xin still has a chance, and when the time comes, this world will be you and Xiaolin's. ”

"Master Peng, what nonsense are you talking about." Yang Xin said angrily, she turned her head and glared at Lin Zhenhua, as if complaining that Lin Zhenhua had affected her reputation.