The situation is the same as Lin Zhenhua envisioned. At the opening ceremony, Vice Premier Tang delivered an important speech, reiterating his previous evaluation of China's machine tool industry: weak independent innovation ability, high dependence on foreign countries, unreasonable industrial structure, and weak international competitiveness. His speech was not long, and he left after the speech, followed by speeches by other department leaders and delegates. Naturally, everyone's speeches were closely related to the spirit of Vice Premier Tang's speech, and they kept saying that they should strengthen independent innovation and participate in international competition.

"We Hannan Machine Tool Company, determined to take the spirit of Vice Premier Tang's speech as a guide, under the guidance of the State Planning Commission, the State Machinery Commission and our provincial and municipal leaders, aim high, work hard, lay a solid foundation, deepen reform, be realistic and innovative, seize the opportunity, and achieve a step in two years, so that Hannan Machine Tool Company will enter the top 100 in the world's machine tool industry by the end of this century."

On the podium, a middle-aged man waved his hand like a rafter, impassionedly expressing determination. The audience members sitting in the front row frowned, and quietly held up the file bags handed out at the meeting, covering the spittle that fell like flying flowers. Nima, really worthy of being a person from a machine tool company, even has to spray coolant to make a speech.

"Manager Mao, this is an internal seminar in the industry, on the issue of understanding the spirit of the leader's speech, you can briefly talk about it, and the focus is to talk about your specific plans." Li Mozi, an official of the Machinery Committee who presided over the meeting, couldn't help but remind.

This man is Mao Shuihong, the general manager of Hannan Machine Tool Company, and when he heard Li Mozi's reminder, he quickly nodded and turned over three pages of the speech. Pick a place to continue reading: "In the next 6 years, we plan to develop 15 to 20 new machine tool products through a combination of introduction, digestion, absorption and independent innovation. Among them, including the spindle speed of 15,000 revolutions per minute, the rapid movement speed of the worktable reaches 50 meters per minute, the positioning accuracy is less than 5 microns, the repeated positioning accuracy is less than 2 microns, reaching the world-class level. ”

"Hmm. Very good! Li Mozi said in an appreciative tone, "High-speed, high-precision machining center is a big gap in our country's machine tool industry, if you can fill this gap, it will make a significant contribution to the country." ”

"Our Hannan Machine Tool Company is a key enterprise built during the National First Five-Year Plan. All of our staff have been taking the revitalization of the national machine tool industry as their own responsibility, and we are determined to carry forward the spirit of hard work and fearlessness of the old Hannan people, and are willing to take a body to fight to the death to tackle the problem of high-speed and high-precision machining center. was praised by Li Mozi, and Mao Shuihong's speech fetish flared up again.

"Manager Mao, as far as I know, your Hannan Machine Tool Company so far. In terms of traditional milling machine manufacturing, it has just reached the level of the early 60s abroad, and CNC technology is basically blank. You intend to complete the 40-year road in 6 years...... Well, even if you have completed 30 years of road, by 2000, it will reach the level of the early 90s abroad, do you have any specific measures, can you say it and let our peers learn from it? ”

Finally, someone in the audience couldn't help but stand up and make a difficulty. Everyone turned their heads to look. couldn't help but whisper. In this circle, there are really many people who know this speaker, he is Lin Zhenhua, the chairman of China Hanhua Heavy Industry Group, a legendary young man.

Lin Zhenhua originally didn't intend to be so public, he has always been a relatively low-key person, focusing on doing more and talking less, and speaking with results. But this one. He really couldn't help it, the people who spoke in front of him were more unreliable than the other, and if he continued to say this, it was estimated that some people would dare to say that the Star Destroyer would be developed before 2000.

"Specific measures...... Mao Shuihong of course could hear that Lin Zhenhua was attacking him. He was a little annoyed, but it was obviously inappropriate for him to sit in the speaking position on the rostrum and jump like thunder. He knows Lin Zhenhua, and knows that Hanhua Machine Tool Company is the strongest in China in terms of CNC machine tools.

"Our specific measures include, first, firmly establish the concept of independent struggle, guide the employees of the whole plant with the correct world view, outlook on life and values, correct thinking, and unite as one......"

"I don't think this measure can be used to guide pig farms." He Lan whispered to her colleagues at the bottom that as the organizer of the meeting, she couldn't stand up to support Lin Zhenhua, so she could only use this way to dismantle Mao Shuihong's platform. “…… Fifth, we have formulated a feasible high-speed, high-precision machining center development program, plans to invest 5 million yuan per year in the next three years for technology development, to overcome more than 20 technical problems such as high-speed servo motors, ball grid rulers, precision lead screws, etc., and strive to come up with the first prototype before April 1998. After saying countless nonsense, Mao Shuihong finally had a little bit of dry goods.

"How do you plan to implement the problem of funding?" Li Mozi asked softly.

Mao Shuihong's face flushed suddenly, his voice was an octave lower, and he said sneeringly: "In terms of funds, we plan to raise some of them ourselves. However, the Machinery Committee also knows that our efficiency is not very good, there were small losses the year before and last year, and the situation in the first few months of this year is not optimistic, so the funds are relatively tight. We hope that the Machinery Committee can help us coordinate and fight for us every year...... More than 3 million yuan of technical transformation funds have helped us complete this task. ”

This is the real purpose of Mao Shuihong's bold words, before that, he planned to apply to the Machinery Committee for an annual fund of 5 million, but after being held back by Lin Zhenhua, he felt that all the funds were borne by the Machinery Committee, which was too ugly on face, so he reduced it by 2 million stupidly. In his heart, he had already greeted Lin Zhenhua's family, old and young.

"Three years, with an investment of 5 million a year, you can jump from the level of the early 60s to the international level of the early 90s, can you tell me how you did it? Forgive my ignorance, I really don't see any feasibility in this plan. Since Lin Zhenhua had already stood up, he didn't bother to hide his head and tail anymore, he directly pointed out the key to the problem.

The venue was suddenly agitated, everyone is in the mechanical industry, and they are no strangers to scientific research, technological innovation, etc. China's machine tool industry is not big, especially such as Hannan Machine Tool Company, such a veteran enterprise, how the technical level, everyone is also aware of it, although not as clear as Lin Zhenhua understands, but it is not too far away. With the current level of Hanhua Machine Tool Company, a total of 15 million has been invested in three years, and it is really a bit of a fool's dream to make the technology reach the level of rebirth.

In fact, everyone also understands that this approach of Hannan Machine Tool Company is not uncommon in the industry. Draw a big pie first, and then ask the national lion for money with a big mouth, and then the things don't come out, and just make up a reason to deal with it. The state's money is invested in state-owned enterprises, and it is considered that the meat is rotten in the pot, and can it still be chased back?

However, this Lin Zhenhua is a heretic, he actually pierced this layer of window paper directly in front of the public, how can this make everyone embarrassed?

The last one to get off the stage is naturally Mao Shuihong. He didn't care about being reserved, he slapped the table directly, and asked with raised eyebrows: "Chairman Lin, I want to know what you mean!" I know that your Hannan Machine Tool Company has achieved good results, but our Hannan Machine Tool Company is not a waste. Everyone is a peer, is it interesting that you are talking like this! ”

Li Mozi had to get up and play a round: "Manager Mao, don't be excited. Manager Lin's side, I think it's just a discussion. Our meeting is a seminar in itself, allowing free debate, and the reason is not clear. Manager Lin, since you have some different opinions on Manager Mao's views, can you also come to the stage and share your thoughts with everyone, and let's discuss them together, okay? ”

"Hmph, okay then, I'll listen to Chairman Lin's opinions." Mao Shuihong angrily put the microphone in front of him to the side and gave up the right to speak. However, he had no intention of getting up and stepping down to return to his position, because if he stepped down, it meant that he was really forced down by Lin Zhenhua. He had to sit on the stage, waiting to pick a few mistakes of Lin Zhenhua and save a little face.

Lin Zhenhua knew that this was not the time to be polite, he had just stirred up Mao Shuihong's situation, if he didn't come to power to say his own opinions, it would be a troublemaker, and everyone would not be used to him. He strode up the steps next to the rostrum and came to the place where the guest spoke. In front of everyone, he nodded to Mao Shuihong first and said, "Manager Mao, I'm sorry, I interrupted your speech just now. ”

"Hmph, it's nothing, didn't Director Li say it, I can't argue with it. I'm just waiting here to hear Manager Lin's insights. Mao Shuihong said coldly.

Lin Zhenhua took the microphone that Mao Shuihong had just moved away, and said to everyone: "Okay, leaders, experts, colleagues, I will briefly state my views." My name is Lin Zhenhua, and I am the chairman of China Hanhua Heavy Industry Group Corporation in Jiangnan Province. Hanhua Machine Tool Co., Ltd. is a subsidiary of our group, so I am also one of the practitioners in the machine tool industry.

Just now, I hastily interrupted Manager Mao's speech, which is very impolite, and I would like to apologize to Manager Mao. However, I think that in this meeting, we said too many high-sounding words, and Manager Mao's speech was just a repetition of these words, so I don't want to listen to it anymore.

What I want to say to you is that we don't have time to say these fancy words, China's machine tool industry is facing a situation surrounded by wolves. The wolves are already here, and if we still engage in this kind of showmanship here, we will all end up eating to the point that we will not even have any bones left! ”