High-tech products are blocked by foreign countries against China, and the advanced process equipment bought, die-casting molds and die-casting machines, the world's best products are produced in Japan and Germany, not to mention Germany's technical strength, traditional power, Japan's die-casting capacity is even coveted by the United States. Boeing bought the integrated fuselage casting process from Mitsubishi of Japan, which gave the Americans a lot of technology to create the F16 fighter.

Then there is Italy, a country that is the birthplace of sports car racing, and itself Italy has world-famous sports car companies such as Ferrari, Lamborghini, and Maserati. For example, Ferrari and Lamborghini are all big R&D players, and advanced nano technology and all-aluminum engines are the first Italians to use in sports cars, so the country's die-casting technology is also very superb.

However, the advanced die-casting process of developed countries such as Japan, Germany and Italy will always only be supplied to domestic production enterprises, and manufacturers in other countries will not sell how much money they spend!

If you want your enterprise to achieve international advanced production technology, you have to solve one technical production problem after another. Lin Qiangsheng's company or other domestic enterprises have bought obsolete production equipment, and perhaps these production equipment that was bought with foreign exchange still have some hidden quality defects. They set a trap in the first place, so that the country will never be able to produce more than their products!

The size and tolerance of the domestic stamping process are relaxed due to the immaturity of the domestic stamping process, and the size and tolerance of the spare parts produced by such equipment are difficult to meet the standards of European products.

In many cases, the relaxation of requirements has become inevitable for localized products, because domestic enterprises cannot solve the production process problems, and can only retreat to the second lowest requirements for product quality. But in this way, the most direct impact is that the spare parts are not closely matched, the gap is too large, the product quality is flawed, and the inside of our products may be jingling for a long time. This is to always give consumers the feeling that domestic products are not as durable as Europe, the United States and Japan. The reason why I can't catch up with others is always there.

Machining and material problems are the key production factors for the quality of enterprise products.

Machine tools and other production equipment can be bought, but high-tech production workers cannot be bought in China. Process technology requires a long period of accumulation, and this kind of housekeeping skill cannot be bought!

For the same part, the life of choosing different directions and routing cut-out is obviously different. Production equipment can be sold, but such as engineering application technology, is kept secret.

In terms of materials, China has also formulated some production standards according to its own national conditions. But the reality is that domestic industrial standards are the product of compromises based on the country's engineering capabilities.

The domestic engineering capacity itself is low, and as a result, the low standards established in the country based on such low capacity have been popularized in a grand manner. In the 21st century, 10 years later, such low standards are popular, and our industry is dominated by thousands of such low standards, and it has reached the point where it cannot be changed, and if you want to improve the standards, you have to eliminate the existing industrial system!

Developed countries such as Germany and Japan have promoted engineering capabilities with high standards, while China has set low standards based on low engineering capabilities.

What's more, China's standards are very tolerant, and their own standards are set low, as a result, many raw material companies in order to save costs and deviate their products into low standards. If the thickness of the steel leaving the factory is not stable due to the accuracy of the rolling equipment of the "two pieces of steel", then in the case of mass production in the stamping plant. Therefore, the size and tolerance of domestic stamping parts cannot be guaranteed. Because of the current regulations on the allowable deviation of the thickness of the steel plate, the raw material supplier will never let go of this opportunity to cut corners, because the longer the width of the steel plate, the greater the quality of the steel that can be saved, and the more costs can be saved.

What is it?

There is a problem with the size and tolerance of our stamping process, and there is also a problem with our raw materials, a weak combination!

There is a large amount of this situation in the domestic production system, so Lin Qiangsheng bought back the production equipment abroad, and the products sold to China use domestic raw materials. And the export products have to use foreign raw materials, because the high-quality raw materials can ensure the process. Such materials cannot be bought at home at all, and can only be bought abroad!

The experimental materials are all imported, because the domestic materials cannot guarantee the quality, and the accuracy of the experimental data cannot be guaranteed without high-quality experimental materials. Therefore, in order to ensure the experiment, it has become a hard demand to order experimental materials from abroad.

China's industrial system is composed of tens of thousands of low-standard production enterprises, and from Lin Qiangsheng's feelings, it is a long way to go to completely localize domestic cars and reach the same technical level as Europe, the United States and Japan!

"It's not that China can't make good engines and can't build excellent vehicles. It's that we don't have the resources! A FAW chief engineer said the thoughts of many domestic automotive engineers.

This resource is the whole system of auto parts manufacturers, steel, rubber and other high-standard production systems that produce products according to the high standards of Europe, America and Japan.

Without resources, we have no advanced materials for the development of engines, even if we buy advanced die-casting equipment, there are no good materials, and the things we research are lower than the engine developed in Europe, the United States and Japan, so that the research and development becomes meaningless. China can only watch people develop new products again and again. Then we are waiting for a long time when foreigners will put good products in China.

Therefore, Eriksson and Niels are not optimistic about the standardization promotion of Lin Johnson's company under the existing system in China, not to mention that he wants to achieve the high industrial standards of German DIN and Japanese JIS in his own domestic product supply system! The German DIN industrial standard is recognized as a strict requirement for high quality, and it is simply unrealistic for Lin Johnson to let the domestic production system learn to run without leaving!

"Let's put product standardization aside, let's talk about how to build an excellent company like Germany and Japan in China?" Lin Qiangsheng summoned Eric Sunnils and others.

Nils said to Lin Qiangsheng: "Mr. Lin, it is impossible to establish an excellent enterprise with DIN and JIS industry standards in China!" Unless we start from scratch, from the processing of steel raw materials to finished automobiles, the product quality of every spare part involved in automobile production must be re-formulated, and excellent enterprises should be selected to cooperate in upgrading their production equipment and processes, so that these manufacturers can achieve high standards of engineering capabilities! But the investment is huge. It's not the forties or fifties anymore, car manufacturers don't have to occupy all the production links in the system, that's outdated, it's the era of global procurement! ”

"Do you want to start all over again?" Lin Qiangsheng muttered silently, and he was noncommittal about Nils's proposal later.

Global sourcing? His countrymen in his previous life had already done it, but it didn't seem to be very good. European, American, Japanese and South Korean spare parts manufacturers are staking their ground in China, and domestic auto companies seem to be unable to play without them!

Niels: They still don't understand that China's automobile system (specifically referring to cars) was actually established after the reform and opening up, and there was no automobile system in China before!

In the original history, it was precisely because of the cooperation between Volkswagen and SAIC that a complete set of automobile production links were established in China, and Volkswagen has made great contributions to the development of China's car industry!

In this history, the domestic automobile system was established by Lin Qiangsheng's promotion, and the large investment and production were short, flat and fast, and China's automobile industry was established for a few years!

The people present felt that this was an impossible task, and first they doubted whether Lin Qiangsheng had the financial resources to help the spare parts suppliers in the domestic system improve their production technology. Secondly, there is no need to do so.

The Swedes present all felt that it would be good for the Chinese to make cars as long as they drove in their own country, and China's current car market is not yet mature, and buyers are still clumsy about whether they can buy cars or not, and it is extremely stupid to invest huge sums of money for an impossible goal!

What's even more ridiculous is that the young boss in front of them still wants to be on par with German industrial standards, and they all think it's a very funny and funny thing.

These people have been working in Bincheng for more than half a year, and they have seen the production capacity of the Chinese very thoroughly from the perspective of foreigners.

It is said that the northern city they went to is also one of the most complete industrial cities in China. They came into contact with a lot of companies in Bencheng, and to be honest, China's industrial capacity is among the first and second rate among developing countries. However, there is no comparison with developed countries at all.

Lin Qiangsheng looked at the people who didn't speak, then looked at Eriksson and nodded at him.

Eriksson saw that his fellow villagers were silent about the goals set by Lin Johnson. He had to say: "Lin, if you can talk to your government side and just let the enterprises in the new industrial zone improve their product standards, I think they are not far from the goal you are looking forward to!" ”

After all, Eriksson watched the new industrial zone be built from scratch, and there were only two enterprises in the industrial zone, Lin Qiangsheng's factory and Binqi, but now more than 20 enterprises have been established. And many of these companies are related to automobile production.

In Erikson's mind, since the Chinese national standard has not been formulated uniformly (issued in 96), there must still be room for operation.

Lin Qiangsheng thought for a while and said: "You all know that my company will soon be on the automobile project, I have a set of production lines, so I let everyone develop a new product standard, and now it seems that the existing domestic production environment is far from my goal!" ”

Everyone nodded in unison. I heard Lin Qiangsheng say melancholy: "Negotiate with the government to help the factories in the system improve their technology and production capacity, so that there is no guarantee that they will be able to produce high-quality and stable products in the future!" What's more, these are all domestic enterprises in China, if the company's requirements are high, the standards are strict, they may not like to cooperate with us, they must be looking for those buyers with low standards and low requirements to continue to make their money happily! ”

"Strict industrial standards will also lead to a significant increase in production costs, and yes, those companies may not like to work with you!" A Swiss who has worked as a technical director at Lim's company told Lim.

"Yes, Bourne! Instead of cooperating with a strict buyer like me, these companies should cooperate with an auto dealer like Binqi and Haqi! Lin Qiangsheng shrugged his shoulders.

This is really a helpless thing, the automobile industry system that I helped cultivate and establish has hardened its wings and has been out of my control!

"Then, I'm going to smash the existing system and beat them back to their original shape!" Lin Qiangsheng gritted his teeth and said with a cold expression.

"The next step is to implement an integral acquisition or joint venture control equity for spare parts suppliers in the new industrial zone, and the minimum requirement for equity acquisition must exceed 60% of the shares. Manufacturers who are unwilling to be acquired will be regarded as unwilling to cooperate, and such manufacturers will be expelled from the procurement list of Binqi and Harbin Automobile, or we will do it ourselves or let the enterprises that are willing to cooperate replace it! Since you say that China's standards are too low, it is impossible to build a good company. Then I will establish the whole system supply chain of the automobile system by myself, and establish the production standards by myself, who can stop me! Lin Qiangsheng glanced at everyone present and said murderously.

The reality of the situation forced Lin Qiangsheng to develop in depth in the industry, and every link such as resource materials, production technology, R&D and design is related to the quality of products. If you want to let the Chinese people sit on a good car and keep the domestic auto market from being occupied by foreign brands, you can only re-set high standards at every step!

Seven people, including Eriksson, were stunned when they heard Lin Qiangsheng's words, they didn't expect the young boss to hit the manufacturers in the new industrial zone, they knew that those manufacturers in Bincheng were going to be unlucky! (To be continued......)