The young man smiled, "I've been taught, and I've learned another trick today, no matter what, I still want to thank the two big brothers!" ”

This young man is quite cheerful and optimistic, if ordinary people encounter porcelain, especially a young rich second generation like him, even if he is not successful, he will usually curse a few words afterwards to vent, but he didn't mention a word of those who touched porcelain, and he didn't take what happened to heart at all.

Xia Yun and Xu Zhiyang didn't care, smiled and said a few polite words to him, and then returned to the Land Rover.

The passers-by who gradually gathered around, after not seeing the excitement, also slowly dispersed.

It's just that Xia Yun and Xu Zhiyang are no longer interested in eating and resting in this hotel, who knows if those people who touch porcelain will still squat next to them, and when the two of them are eating and resting, they will cut a few knives on their cars, smash some glass, and get some hands and feet.

This kind of thing is also very common in society, especially those local snakes who touch porcelain, and they usually haunt you like mud when they encounter outsiders who pass by, like a toad, jumping on your instep, not biting you, but disgusting you.

Out of the gate of the parking lot, sure enough, I saw that the group of people who had just touched the porcelain were still gathered together to guard outside, and when they saw Xia Yun's Range Rover driving out again, they all glared at him a little viciously.

Xia Yun suddenly became interested, smiled, lowered the car window, and gave them a middle finger.

"Ga Qian, sixty-two, know a fork! Gua Lao'er is eight Laozi and runs away, Ou 7 Ou 8 Ou Sisi! ”

Listening to Xia Yun talking in the Hangcheng dialect, Xu Zhiyang shook his head and laughed, saying that he had beaten his father-in-law and was hit. The girlfriend flew, and Xia Yun resigned from Wucheng and came back. has always been a calm and calm appearance that has seen through the world, and he hasn't seen Xia Yun so flamboyant for a long time. He didn't look like a young man in his twenties at all.

Maybe it's when people are outside, leaving the familiar rules and regulations at home, it's inevitable that some indulgence will fly.

The car continued to drive outside, Xu Zhiyang looked through the rearview mirror and watched the group of people scolding at his side, especially the old lady, who even grabbed a small stone on the ground and threw it here, and couldn't help but shake his head and sigh again.

"The old people nowadays feel worse and worse. In the past, we had an old lady Xu in Yuening, and there were many old people competing to follow suit, so that now no one even dared to help the old man fall to the ground, and then what kind of square dance did he dance early in the morning and at night, the loudspeaker sounded, and the people in the vicinity were not at peace, and what did they scold and beat people on the bus without giving up their seats...... Alas! ”

Xia Yun smiled, "Isn't it popular to say such a thing now, it's not that the old man has become bad." It's that the bad guys have become old, the lawless Praetorian Guards back then, the restless youths who danced ballroom dances in karaoke and workers' squares, and the street bandits, road ragepers, hooligans, and green skins, are now old. came and went, and they were all the same people as they were back then...... Brother-in-law, we are all past the age of angry youth. Let's open it! ”

Xu Zhiyang sighed again and stopped talking.

Xia Yun drove for another ten minutes. It was some distance from the original hotel, so I chose a new hotel. The two had a simple lunch, and then opened a room to take a nap and rest for a while, and then set off again at more than two o'clock in the afternoon, to the target of this time, the site where Tianda CNC Equipment Co., Ltd. is located.

Tianda CNC Equipment Co., Ltd. is a veteran listed company specializing in the production of CNC machine tools and machining centers in China, with a market value of about two or three billion, and has a history of several decades.

Although today is October 3rd, during the National Day holiday, the workers are on holiday, did not start work, but Tianda CNC such a large enterprise, naturally can not really all be on holiday, since there are internationally renowned listed companies Dahua Machinery recommended customers to visit the field, then naturally someone has to be greeted.

On the way here, Xu Zhiyang had already called the other party, and when the two arrived at the gate of Tianda CNC's factory, a business manager and technical engineer of the other party were already waiting.

The business manager is a young man in his early thirties, surnamed Pan, named Pan Yijie, and the technical engineer is older, estimated to be in his forties, named Wang Zongqian.

It can be easily distinguished from the expressions and demeanors of the two, those who are engaged in sales and business and those who are engaged in technical skills are completely different templates, those who engage in sales are sleek and laughing, and those who engage in technical skills are much more serious and stiff.

After a brief introduction to each other and a polite greeting, the four of them changed into work clothes, put on hard hats, and entered the product exhibition hall of the workshop.

The purpose of Xu Zhiyang's visit to this company this time is very clear, mainly to buy a five-axis linkage gantry machining center, and the others are to take a look first, understand the situation, and then consider what is suitable.

The two sides had communicated on the phone before, and Pan Yijie and Wang Zongqian didn't say much, so they took Xu Zhiyang and Xia Yun and went straight to the gantry processing center, stopped in front of the behemoth that was five or six meters long and three or four meters wide, and Pan Yijie introduced Xu Zhiyang and Xia Yun.

"Our CNC five-axis gantry machining center is mainly used for multi-variety, small and medium-volume processing of precision and complex curved surface molds and parts. It can meet the usual milling, drilling, tapping, boring, internal circle, outer circle, step, cone, spherical surface, groove, and 2D or 3D complex surface processing, and can meet the rough and finishing of casting and forging blanks of various high-temperature alloys, titanium alloys, heat-resistant alloys, stainless steel, cast iron, cast steel and other materials. The system has good rigidity, good reliability, high precision and long life. It can reliably and stably complete the coarse, fine and fine machining of high-precision difficult-to-machine materials, and can process various difficult-to-cut materials. ”

"Suitable for machining medium-sized and complex workpieces. It is mostly used in mold, machinery, machine tool casting processing enterprises, such as aerospace, automobile mold, hydropower generation, rail transit, machine tool casting, construction machinery, wind power, mold and other fields. ”

Xia Yun almost didn't know anything about these things, but Xu Zhiyang, as an expert who had been in this industry for nearly ten years, naturally would not be fooled, so he walked around this gantry machining center a few times and asked some key points directly.

"What is the power of the main motor in your machining center? What is the three-axis travel? How compatible is the programming mode with the system, and what is the maximum accuracy? ”

Pan Yijie was a little blind and looked at Wang Zongqian on the side.

"The main motor power is 30 kilowatts, the spindle speed range is 18000rpm, the three-axis travel is, the X-axis is 1000 mm, the Y-axis is 1100 mm, the Z-axis is 700 mm, the positioning accuracy is 0.002, and the number of tools is 60......"

Wang Zongqian, a technical engineer, obviously still had a few brushes, and he didn't blink his eyes, and reported some parameters of this machine.

"CNC machine tool for human-machine dialogue programming mode: can be directly connected with UG/PRO/E/CAD/CAM and other drawing software, automatically generate processing programs, eliminate the trouble of complex programming, get rid of the dependence on technical workers, reduce the cost of employment. In addition to the conversational programming function, it also has the function of being compatible with ISONC code, that is, compatible with CNC systems such as FANUC, SIEMENS, etc. ”

"In terms of system compatibility, it can be compatible with the functions of CNC systems such as FANUC and SIEMENS, and can copy the ready-made CNC machining program to the machine tool for direct use, and is compatible with ISONC code functions. Programming is in the form of questions and answers, without the use of coding or computer languages. This makes the operation easier to learn, and beginners can master the system after only two days of training.

"The main processor is a 64-bit Pentium chip, 40G hard disk storage, and the block processing speed is 1ms, which makes the data processing faster and the response more accurate. The program prereads up to 600 program segments, 2270bps data blocks, and the processing accuracy can reach 8 decimal places. The machining time of complex programs can be reduced by at least 20%. ”

Listening to these professional words, Xia Yun was a little dizzy, but Xu Zhiyang seemed to be quite satisfied, and discussed with Wang Zongqian for more than half an hour, and finally put forward a request, "Can I try it?" ”

Wang Zongqian nodded very happily, "Of course you can, Mr. Xu, what is the size of the workpiece you want to test the machine, what is the material of the parts, there are No. 45 steel, aluminum alloy, ceramics and so on in our prototype room." In addition, how much is the processing accuracy, what is the processing process, and what are the special requirements? ”

Xu Zhiyang nodded and chirped......

Wang Zongqian also nodded, chirping......

The two found a lot of raw materials and began to operate in the processing center.

Xia Yun didn't understand what they were saying at all, nor could he understand what they were doing, shrugged his shoulders, stopped paying attention to their movements, and turned his head to observe the product showroom.

I have to say that the strength of this company is indeed relatively strong, the entire hundreds of square meters of product exhibition hall, there are twenty or thirty kinds of equipment of different sizes, most of which are large machinery such as some machine tools.

In a corner of each machine, there is a sign erected, Xia Yun glanced at it, there are also in front of this gantry machining center, a few big characters on it, a five-axis linkage CNC gantry machining center, and a row of small characters below, the price, 1.4 million ......

A gantry machining center is 1.4 million, and there are twenty or thirty units here, if they are all similar to this price, there are more than 30 million, nearly 40 million, which is almost comparable to the total assets of their machinery factory, and this is just a product showroom! (To be continued......)