PS: For the sake of the monthly pass, for the subscription, for the gourd girl to have snacks and fruits, the gourd can continue to write...... The legs were swollen on their knees, and the gourd continued to kneel; The tears are about to dry, the gourd continues to sway, if everyone sees the gourd tears are not stimulated, the gourd will cry blood......

Since Youjia is willing to equip these professional programming software and computers for free, Yun Fei will not be heartbroken by the extra tens of thousands of dollars. With a wave of his hand, he signed the computer purchase contract attached to the contract.

Youjia is still more generous this time, and the three computers that are randomly equipped only charge 70,000 yuan for Xin Kaixing, and the genuine MASTERCAM software is given away for free!

Yun Fei wants to use the pirated copies of later generations.,A lot of the more pirated ones have been sinicized.,Most of the instructions in it are in Chinese.,There's no need to be forced to look through the English dictionary while looking up the meaning of each command.,While learning the operation of software programming.。 It's a pity that this is an era when there is no ferry aunt, and there are no network resources for Yun Fei to download.

However, the original genuine still has the benefits of the original genuine. AT THE VERY LEAST, THE ORIGINAL MASTERCAM DOES NOT HAVE TO WORRY ABOUT INSTABILITY WHEN USING, INCORRECT PARAMETER SETTINGS, AND TOOLPATH CHANGES. It turns out that in that world, Yun Fei had to use the entire software many times. Because pirated professional industrial design software and programming software will be damaged in some parts of the program, or the translation is not in place, which will cause problems in the program.

These problems are not easy to check, after all, many programs in later generations are tens of thousands of instruction segments, and some complex parts such as special-shaped row cavity processing have even more than 100,000 processing program instruction segments! If these programs have an error at the end of the program that is close to completion, you can't cry! Therefore, in the original world of Yunfei, most of the companies that do precision machining or complex mold processing will choose genuine programming software to use.

In this way, piracy is extremely rampant in Chinese mainland. Genuine industrial design and programming software still occupy a large market. After all, pirated software can only be used for learning.

Since it will take a long time for the arrival of the machine tool, Yun Fei asked the other party to send the computer and software that came with it first. Just when the machine tool did not come, Yang Guang and Wu Zhongda and several other programmers in the CNC workshop were taught to use this software to compile complex parts processing programs.

Soon, the computer was sent to Xinkaixing's CNC workshop by Kanmat.

After waiting for a long boot time of several minutes, Yun Fei almost dozed off, and saw Yang Guang and the others excitedly staring at the computer that made Yun Fei extremely despised, Yun Fei kept reminding himself in his heart: "I can't tell them that I once had a computer, and it was turned on in twenty-five seconds, and more than a thousand GB of hard disk were filled with all kinds of people from all over the world. Especially the love and love art action movies of the devil country. You can watch these art action movies while masturbating, while talking nonsense with the other side of the network who don't know whether it's a cat or a dog, and by the way, you can also use the extra hands to PK with the opponents in the game! ”

Fortunately, the current version MASTERCAM4.3 is not as powerful as the 9.0 version that is not used to the cloud in later generations, and it is not as perverted as UGNX4.0 or other modeling programming software has perverted requirements for computers. Otherwise, Yun Fei could only cry in the face of the legendary garbage artifact with only this 4MB memory.

ALTHOUGH THE CONFIGURATION OF THIS COMPUTER CAN BARELY KEEP UP WITH THE REQUIREMENTS OF MASTERCAM SOFTWARE, IT TAKES A LONG TIME TO DRAW A STRAIGHT LINE.

Yang Guang and Wu Zhongda have a good foundation in English, Yun Fei really can't stand to draw a straight line like this can be stuck for a long time, and when the Boolean operation or post-processing is done on the drawn figure, the slightly more complex Boolean operation can make this garbage artifact with a price of more than 20,000 stuck, and I patiently told the two of them most of the commonly used drawing and programming commands. Then the most important toolpath parameters and these settings were explained in detail, and then Yang Guang and Wu Zhongda, who were extremely motivated, played by themselves. He couldn't stand the computers of this age.

There is no game, there is no humanized operation interface, there is no soft sister paper on the opposite side of the network cable, and the garbage artifact that pretends to be dead at every turn. Yun Fei is extremely lacking.

In the days of waiting for the arrival of Youjia's CNC machine tools, Yun Fei began to slowly put his energy on Huadu CNC. After all, that's part of his business.

However, it didn't take long for Yun Fei to arrive in Huadu CNC, and he was so frightened by Qin Qingshan and a few people that he didn't dare to go anymore.

LSK9201 prototype has already been built. The C series for lathe systems has cloud-free parameters. Began to install the upper test on the modified lathe of the Huadu CNC test workshop. However, the X series used for the milling machine system, in addition to some parameters that are more common to the two series, there are many independent parameters that need to be tested by Qin Qingshan and others. I set it up while putting it inside. Even the various functions need to be defined by them!

As soon as Yun Fei went, a few words could make a few people busy for a while. However, Yun Fei regretted it for the first time after he said what he had heard from the later generations and was not sure of himself. That day, he was dragged by a few old guys who were in full swing, trembling when they walked, but they were extremely energetic, and after working overtime with him until two o'clock, he swore that he would never enter the flower count again before the LSK test was put on the market, and then drove his Mercedes Benz and fled.

He didn't want to be tortured to death by these old guys.

"Damn, it's really not easy to find you kid now. I'm tired to death, but you're enjoying it here...... Ran to Xin Kaixing, they said you went to the number of flowers; didn't even take a breath, and arrived at the number of flowers, but said I don't know if you, the second boss, haven't appeared for a long time......" As soon as he entered the ward of Uncle Yun Fei of Jimin Hospital, Ren Zhiguo opened his mouth to Yun Fei like a strong organ.

"Damn, you're only two!" Yun Fei couldn't help but be angry when he heard Ren Zhiguo say that he was the second boss! In this era, in China, most Chinese people are said to be two, and no one will say that Yun is not two!

"Aren't you two? Xin Kaixing, the shares you own are ranked second, and they are their second boss; In Huadu CNC, you are also the second largest shareholder, and you are still the second boss! I said, you still don't recognize that you are the second boss? "Ren Zhiguo didn't know the meaning of the two in the world of Yun Fei. He didn't expect that this two, which made Yun Fei extremely angry, was not until twenty years later, when he was idle and wandering around the Internet to soak soft sister paper, he was said to be two by a sister paper, and he searched for the meaning of two on the Internet. At that time, I remembered this scene with Yun Fei, and his eggs hurt so much when he laughed for many days! At that time, he forgot to suspect that Yun Fei knew that Lu Dao Er had such a meaning.

"Don't talk nonsense, if you have something to say, it's rare for the master to hide here for a few days." Yun Fei was lying on Jiang Jianxing's hospital bed, crossed his legs, and said to Ren Zhiguo while nibbling on an apple.

"Come with me, Lao Zhao wants to talk to you." Ren Zhiguo said sincerely to Yun Fei. After all, Lao Zhao went too far last time.

"Don't, aren't you talking to the Dirk Company in West Germany right now?" Yun Fei asked in surprise.

Kamat and Dirk in West Germany are now talking about the procurement of four-axis CNC machine tools, but the other party's asking price is too ruthless, and Zhao Xingbang can't make up their minds at all. , the price was actually reduced to 1.96 million US dollars, and the price was no longer reduced, this price made the military too painful.

Speaking of this, Yun Fei was depressed. In his original world, the GDR and the Federal Republic of Germany were reunited on 3 October 1990, and the Berlin Wall was dismantled. However, from Ren Zhiguo's mouth, I learned that although the Berlin Wall has been torn down to now, the GDR and the Federal Republic of Germany have not yet completed their reunification. More importantly, it seems that the current Soviet Union, although it has been in chaos, countless countries have declared independence, but the Soviet government has not yet declared its dissolution.

Well, in fact, Yun Fei doesn't care about these issues. The GDR and the Federal Republic of Germany did not merge, and there was nothing about it; The Soviet Union did not disintegrate, at most, it was to let Yun Fei's plan to come to the Soviet Union workers for him to be a part-time worker, but Ren Zhiguo revealed that the country has been messed up to now, and Lao Maozi has made a lot of good things back in China, and the drawings are all transported train by train, and of course, there are countless experts who are engaged in cutting-edge technology research have also been secretly smuggled back.

What Yun Fei has been struggling with is that Xiaoping has not toured the south until now!

If Yun Fei is not mistaken, the time of Xiaoping's southern tour was in January and February 1992. If Xiaoping had toured the south, China's first special zone, and Xiaoping's field inspection had been carried out by the Xiaoping Painting Circle, it would be impossible for him not to come and see the results. Moreover, Yun Fei is still waiting for Xiaoping to make an important speech on his southern tour.

In fact, China's entire economy began to take off at a rapid pace only after Xiaoping's speech on his southern tour. The state began to gradually let go of its control over the market, and China began to take the first step towards a real market economy system. If Xiaoping didn't make a southern tour, and he didn't make a speech on his southern tour, which has affected the entire Chinese economy for 20 years, Yun Fei still wouldn't dare to do his own thing.

Now, all history has changed beyond recognition. But Yun Fei didn't care very much.

Xiaoping has always attached importance to the development of science and technology, and put forward the viewpoint that science and technology are the primary productive forces. It turned out that in that world, when he was touring the south, he visited many high-tech enterprises in the Special Economic Zone, such as Shenwu pharmaceutical, electronic communications, and software companies......

If you can find a way to seduce Xiaoping to Huadu CNC, seduce to Xinkaixing, and visit, how much capital does this have? At least, when Xiaoping did not pass away, Yun Feijiang's development would not be restricted in any way.

Yun Fei has decided, we must let Hua Shu start building momentum now, and it is best to let all the people in China know about this matter! To let all Chinese know, the Chinese have come up with the first set of their own CNC system, and it is also a mid-range CNC system that can control the machining center for three-axis linkage.

If this is the case, it will not be possible to seduce Xiaoping to Huadu CNC, Yun Fei can only accept his fate and develop slowly with honesty and peace of mind. (To be continued......)