PS: Continue to cry, still kneeling, begging for subscriptions, begging for monthly passes, begging for everything......

After telling all the workers in the entire factory about the dry shares, Wang Qingfeng and Yun Fei summoned all the managers above the team leader to the large conference room on the first floor of the office building to announce the dynamics of some high-level factory leaders.

In fact, the dynamics of the top management of the factory are mainly the whereabouts of Yunfei. Yun Fei is the second largest shareholder of Qingfeng Machinery, but he has agreed with Wang Qingfeng and several other shareholders who each hold 5 percent of the shares. For the factory management affairs, he will not intervene again, but only grasp the strategic direction, and after the development of Xinkaixing is out of the preset track, he will enter the market again.

Xin Kaixing established a board of directors, with Wang Qingfeng as the chairman, Yun Fei, Yang Dezhi, Zhu Yuanshan, Wu Jianguo, and Zhang Yumin as the directors.

Luo Xiaoli was dismissed from the position of assistant to the deputy factory director and became the director of the office, responsible for the administrative affairs of the entire factory office. Chen Jie is still the manager of the personnel department, but he is also in charge of the position of director of the strategic planning office of the company, which is just an empty shelf, and Yun Fei is the director of the planning department. There hasn't been much change in the rest of the personnel.

Under the strong request of Yun Fei, the finance department was personally served by Wang Qingfeng, the chairman who did not know much about finance.

Finally, it took a lot of time to straighten out all kinds of things in Xinkaixing, and Yun Fei waited for the six CNC machining centers that Kamat helped buy in place. As long as these machining centers are fully operational, Yun Fei will leave Qingfeng Machinery and put his main experience on negotiations with the military.

Yun Fei now has many positions in Xinkaixing, including director, director of the planning department, and executive CEO. However, for the shareholders of Xinkaixing, the most critical identity of Yunfei is the consultant! Technical consultant, management consultant, strategic planning consultant. In other words, it doesn't matter whether Yunfei is in the company now, what matters. As long as there are any signs of bad things in the company, Yunfei, a shareholder, will settle in strongly! Yun Fei's strength will suppress all bulls, ghosts, snakes, and gods.

Huadu CNC is working overtime every day to produce the samples on the drawings given by Yunfei. They need to produce samples as quickly as possible, and then debug them to set detailed parameters for various functions. It's already early April, and it's less than half a year away from this year's Huadu Fair.

For the order transferred from Kamat, under the strong intervention of Zhao Xingbang, the processing fee was given according to Yunfei's requirements, and a batch of settlements was completed. Zhao Xingbang was very anxious to meet Yun Fei again. However, Yun Fei has been very busy during this time, so he has no choice but to wait.

On this day, Ren Zhiguo went to Xinkaixing and excitedly told Yun Fei that six German machining centers were not obtained, but four Taiwanese three-axis machining centers were obtained, and Yun Fei asked if he wanted it.

"Which company in Taiwan produces it?" Yunfei still knows a lot about the early CNC machine tools in Taiwan. Because the country was blocked by foreign technology, and the market demand for CNC machine tools in China was huge. Many Taiwanese machinery companies see the business opportunities here, take advantage of the support of NATO countries, import various spare parts in various countries around the world, and start the production of three-axis machining centers in Western European and American countries and Japan that have become the most low-grade equipment. However, Taiwanese companies in the early production of machine tools. It can be said that it is a patchwork. In addition to the large castings on the machining center, almost all the precision parts come from Japan and the United States. Even Germany does not buy their bills.

Taiwan's machine tool companies occupied half of the early mainland CNC machine tool market. It is precisely for this reason that Taiwan's CNC machine tool companies can obtain a large amount of research funds. Started the research of independent brands in the true sense.

Among them, the most memorable ones for Yunfei are the corporate brands of Taichung Precision Machinery, Youjia and Xiehong.

In the 90s, Taichung Precision Machinery was the best CNC machining center manufacturer in Taiwan, and has always been the leader in the production of CNC machine tools in Taiwan. However, the price is also the top-notch, and it is not even cheaper than the machine tools imported from Europe and the United States.

Taiwanese are as cheap as the Japanese in their bones. Selling to their Taiwanese processing centers may cost only half of what they bought in Chinese mainland! Later, as Europe, the United States and Japan gradually relaxed the restrictions on low-end machine tools in the mainland, the machine tools produced in Taiwan with non-precision equipment began to reduce prices significantly. In order to reduce production costs and save the import cost of each machine tool, we began to build assembly plants in the mainland. Taichung Seiki did not have such a choice. And they are different from other Taiwanese machine tool manufacturers, and the machine tools are sold to everyone at the same price. Because the accuracy and efficiency of their machine tools are really good, they were very popular in the nineties.

Taichung Precision Machinery did not choose to build a factory in Chinese mainland because of the lack of research funds in the late nineties, and the product replacement could not catch up with the younger brothers who came later, and were gradually abandoned by Youjia and Xiehong, which have been suppressed for more than ten years.

When Taichung Precision Machinery arrived at the time of Yunfei, it was almost reduced to a last-class CNC machine tool manufacturer.

Youjia's CNC machine tools, especially after the establishment of an assembly plant on the edge of the West Lake, were listed in Hong Kong in 96. Especially later, in Chinese mainland, under the banner of domestic brands, it competed with foreign CNC machine tools, and at the same time, all spare parts were imported and only assembled in China, under the pretext of competing with domestic CNC machine tool enterprises. Although Yun Fei felt that the processing center they produced was still quite easy to use, he still despised them very much for doing things that were not disciplined.

It can be said that Taiwan's CNC machine tool manufacturers, in order to get the mainland market, are the first to realize the peaceful reunification of the two sides of the strait! They managed to return to the bosom of their mother motherland.

Taiwan Xiehong, Yun Fei doesn't know very well, but the CNC equipment of Zhilu Dao is better than the CNC equipment produced by Youjia, and it is also a lot more expensive. One of Yunfei's masters, is the first batch of workers in Chinese mainland to receive CNC machining center training, and is also the earliest batch of modern CNC machine tool operation technicians in China, Yunfei's master, is still very fond of Xiehong's machine tools. It turned out that in the world of Lu in 9596, Yun Fei's aerospace system company where the master worked purchased a large number of Xiehong's processing centers.

"Youjia's." Ren Zhiguo's words made Yun Fei retract his thoughts.

"What model? What's the price? Yun Fei knew how to say. At this time, Taiwan's machine tools are not much cheaper than those in Europe and the United States.

"FEELERFVM1350, the price is 880,000 ......" When it comes to this price, Ren Zhiguo is a little bottomless in his heart. The Taiwanese side quoted 850,000 yuan, and they only added 30,000 yuan. You must know that Yun Fei has a price in his heart, but it is 600,000 to 700,000 units!

If at this price, Yun Fei originally planned the price of purchasing Liutai equipment, and even five units were a bit reluctant.

"The price, a bit high. What system are they equipped with and what are the specific parameters? "Yun Fei Ren Zhiguo.

"Uh...... This is not very clear......" Ren Zhiguo replied to Yun Fei embarrassedly.

"That's fine. You arrange it, and we'll find a time to talk to them. Yun Feizhi said, let Ren Zhiguo, a guy who is not interested in machine tools, remember those awkward machine tool parameters and various professional terms, it is indeed a bit reluctant.

However, after the worst comeback, Yun Fei still did not negotiate with the other party. After all, this is not quite in line with the rules of business, Kamat is a middleman, if the customers at both ends hook up, there will be no middleman for any period at all. Yun Fei also understood, but he still asked Kamat to send professional personnel to communicate with him.

FVM1350。 Equipped with Japanese Mitsubishi system, X-axis travel 1350mm, Y-axis travel 750mm, Z-axis travel 750mm. It can be equipped with a disc type tool magazine or a bucket hat type tool changer. There are 16 knives, 24 knives, and 32 knives. For production-oriented enterprises that make products, these numbers of tool magazines are completely sufficient. The biggest feature of this machine tool is that it is equipped with an automatic chip rolling device designed by Youjia itself.

FVM1350 this model, for a company like Xinkaixing that produces products instead of making molds. If you buy five of these machines, it's a bit too big. After the end, the other party said that there are two models, FVM800 and FVM1000, and the price will also increase a lot.

FVM1000。 X-axis travel 1000mm, Y-axis travel 650mm, Z-axis travel 650mm; FVM800, X-axis travel 800mm, Y-axis travel 550mm, Z-axis travel 550mm.

These models have the same configuration except for the X-axis for lateral movement, the Y-axis for longitudinal movement, and the Z-axis for up-and-down movement.

After several back-and-forth communication between Kamat's people, Yun Fei finally decided that Xin Kaixing would buy one FVM1350 for 830,000 yuan, two FVM1000 for 720,000 yuan, and three FVM800 for 650,000 yuan. Once the contract is signed, it will be delivered within one month.

Since Xinkaixing purchased a total of 4.22 million Youjia equipment, it can be regarded as the first private large customer developed by Youjia in Chinese mainland, and the follow-up procurement of this customer can be more powerful. Youjia company has equipped these machine tools with three computers! There is also a professional programming software for CNC machine tools, MASTERCAM!

For computers of this era, Yun Fei pouts, Pentium 100 CPU, 320KB graphics card, 3.2GB hard disk, 4MB memory, 14-inch CRT monitor! How can Yun Fei, who has always hated his wife in later generations, not be domineering enough, 8GB memory is not good enough, and 1TB hard disk is not enough to use the configuration of the person who is eye-catching?

However, the MASTERCAM4.3 version of the programming software installed in the computer is the most important thing for Yunfei.

I've always wanted to get these professional programming software, but Kamat has no way to get it. There are dozens, and others say how many tens of thousands of pieces of software are. Yun Fei didn't bother to pay attention to it, and kept letting the original Qingfeng Machinery use macro programs to process three-dimensional surfaces.

However, the constant variables and local variables of macro programs are very painful to remember, and there are some function formulas or something, and many times it takes many days to encounter complex irregular surface processing. This is because in order to program the machining macros of those complex surfaces, mathematical modeling is necessary. (To be continued......)