As soon as the report of the large-scale acquisition of the bankrupt state-owned machinery factory by the Jiuyi Heavy Industry Group caused an uproar at home and abroad.

As China began to rein in the overheated economy of the country in the 90s, China's economic growth began to slow down, and the expansion of Chinese companies was restricted.

Except for some light industry and high-tech enterprises that are expanding rapidly, most of the heavy industries are shrinking their business, and now Jiuyi Heavy Industry has suddenly acquired bankrupt state-owned enterprises with such a large amount of money, and people who understand the situation a little bit can't understand what the young boss of Jiuyi Group wants to do!

The merger and reorganization of state-owned enterprises is not shocking, after all, they are all state assets.

This is the first case in China in which the private sector has swallowed up state-owned enterprises on a large scale.

Whether this is whether the state wants to fully liberalize its control over the private economy, or whether there is something else, many people hope to get an official answer. But there was no follow-up. The acquisition team of Jiuyi Group is still acquiring the planned bankrupt state-owned machinery factory according to the itinerary.

The officials of the Jiuyi Group did not make any explanation, and the bricks and beasts who jumped out as soon as they encountered something also remained silent.

In the whole of Southeast Asia, with Soros's quantum fund blocking the Thai economy, due to the help of the Chinese government, which is worried about the impact on the Hong Kong River, Soros has shifted the main force of the attack to small countries such as Malaysia and Indonesia, and has affected Taiwan, Japan and South Korea, and the financial crisis that has swept the entire Southeast Asia is still breaking out.

Under such circumstances, the economies of most countries in Asia have been impacted, and stabilizing the Chinese market has become the only way out of the financial crisis for many national enterprises.

In the case of many countries increasing exports and purchases to China, Jiuyi Group has made such a large-scale acquisition, and it has clearly announced to Japan, South Korea, Singapore and other countries and enterprises that export a large number of machinery and equipment to China.

"Mr. Peng. With such a big move by the Jiuyi Group now, should we just let it go? As soon as Wang Ziqing saw the news, he hurriedly found Peng Zhi.

From the very beginning, many CNC equipment companies that have entered or are about to enter China know that Jiuyi Heavy Industry will definitely have a strong response to their actions, but such a large market in China, with the production capacity of Jiuyi Heavy Industry, it is impossible to occupy all of them.

As expected, Jiuyi Heavy Industry carried out large-scale price cuts to stop them.

And they didn't expect that after the price reduction of Jiuyi Group. There are bigger back-hands.

"Wait, we have a firm foothold in the mainland, and now the price of CNC equipment of Jiuyi Heavy Industry has not had much impact on us. They have not had much of an impact on us as they scale up their production. Now it is time to be anxious about those who are preparing to set up factories in China. Korean and Japanese companies that have not yet started! Peng Zhi said calmly to Wang Ziqing.

The two companies began to fight on their own. After the merger, the management costs of the two factories have dropped a lot, and the technical level of Taiyu Precision Machinery has also improved a lot, even if the machining center is not competitive, Jiuyi Heavy Industry is ready to give up the low-end CNC car market. Seized a lot of the market.

It is precisely because of this that they have barely gained a foothold in the market, and now their processing centers have begun to eat away at the market share of Jiuyi Group.

"Aren't we going to be hit harder? Their four-axis machining center has already begun to be delivered to the Continental Military and is now expanding to such a large capacity. It should be that the production of low-end products will be expanded, and further price reductions will be unavoidable......" Wang Ziqing felt too aggrieved.

If it weren't for Jiuyi Heavy Industry, how could he possibly agree to let Taiyu Precision Machinery be swallowed up by Wanyou CNC!

"That's a matter for the future, at least for now, Jiuyi Heavy Industry will not cut prices again, not until they form new production capacity." Peng Zhi shook his head.

"Then let's just watch the fire from the other side and watch them fight with the Japanese?" Wang Ziqing's face twitched.

Now he only holds more than 20 percent of the shares of the merged company, and has no say in the company at all.

"The Japanese are not stupid, the Koreans and Singaporeans have lost a lot in this financial crisis...... Peng Zhi said that, he looked at the scenery outside the window with his hands behind his back and stopped talking.

Wang Ziqing could only take a breath of talk.

It's okay to keep an eye on the stock market!

The CNC equipment factory has money to make, and it is waiting for dividends and losses, so let Peng Zhi plug the hole......

"Li Sang, why are you here now?" Onomura Saburo waited for almost half an hour before Li Mingshan came over slowly with his secretary, which made the Japanese very angry.

Li Mingshan smiled at Onomura Saburo: "Ohno-kun, it's not that I'm late, it's that you came too early......"

"You ......" Saburo Onomura almost jumped, but the people around him stopped him.

The heads of Japan's Mitsubishi Corporation China Office and Mazak China Office jointly sent invitations to Lee Myung-bak of South Korea, Song Hui of Singapore, and Peng Zhi of Taiwan, inviting them to discuss how to deal with Jiuyi Heavy Industry's move.

Taiwan's Peng Zhi rejected their invitation outright, on the grounds that he wanted to go to Italy to negotiate a takeover.

Singapore Song's Zhongsen CNC is the only CNC equipment manufacturer in Singapore, which is later than Taiwan's entry into the CNC equipment industry, but the strength is not too bad, otherwise there is no heart to enter the Chinese market to gnaw fat.

In the past, many second-hand CNC equipment in Europe entered the Chinese market, all of which were transited through Singapore, and Singapore also saw the huge profits in the transit trade, so it developed on it.

However, due to the late start, the entire Asia-Pacific market is occupied by Japanese and Taiwanese CNC equipment manufacturers, and they have little opportunity at all.

A blank Chinese market is what they value the most.

If it were not for the rise of Jiuyi Heavy Industry, the Taiwan factory in Chinese mainland would not have even recovered its investment, and they would have entered the Chinese market long ago.

Although Singapore is also a Chinese country, they do not have a strong sense of identity with China, and they often embarrass the Chinese government internationally, and can almost be said to be the vanguard of official forces that hate the Chinese government. Because of these reasons, they were able to obtain all kinds of relatively advanced technology and advanced equipment from Europe and the United States.

And once you want to get benefits from China, you start to say that the same species is the same origin, and at the critical moment, when it is time to pit China, you still have to pit China.

"Okay, Ohno-kun, since everyone has arrived, let's say exactly, if the Taiwanese don't come, won't our business alliance be established?" The relationship between Japan and South Korea is very surprising, and the people of the two countries are hostile to each other, and even the government will fight in public, but there is extensive cooperation in many aspects such as economy, military, and politics.

"Let's get together today to discuss how to deal with the resistance of Jiuyi Heavy Industry. Now that the international community has begun to relax the technological blockade against China, this is our opportunity...... "If there is no mediator, the Japanese and the South Koreans can even fight forever."

If Li Mingshan and Onomura Saburo quarreled, today's business would be impossible.

"Yes, the Wasena Supervisory Committee, in view of the fact that Chinese already have the production technology for four-axis machining centers, and in five or even three years at most, they will be able to have the production technology of five-axis machining centers, so they have agreed to the proposal of some enterprises to export low-precision five-axis machining centers to China......"

"What does this have to do with us? Mr. Ohno, we at Otomo are companies that produce two-axis CNC lathes and three-axis machining centers, and it seems that there is no provision in the Wasena Agreement that we cannot export three-axis machining centers to China, right? "Li Mingshan is most annoyed by Japan.

Every year, Japan exports more than four-axis high-end machining centers to South Korea, which can make a lot of money for Koreans.

Li Mingshan had long wanted to introduce the production technology of four-axis machining centers and five-axis machining centers from Japan, but the Japanese were unwilling to sell the technology to them.

How many high-end machining centers do you want to buy, we sell them all, if you want to buy production technology?

No way!

This made Li Mingshan very painful.

"Ohno-kun means that since we all plan to build production plants in China, we should form an alliance to concentrate our sorrows and compete with Jiuyi Heavy Industry for China's CNC machining center market...... "As Tojo Jun of Mazak's China office, which occupies half of the market share of China's high-end market, these companies only need to attract the attention of Jiuyi Heavy Industry in the low-end market.

The higher the technology of Jiuyi Heavy Industry develops, the greater the pressure on them.

Either more high-end equipment will be introduced to China, or the price of equipment exported to China will be reduced. There is no other way but this.

Otherwise, their market will be snatched up step by step by Jiuyi Heavy Industry, which has production technology.

Now exported to China's high-end four-axis machining centers, what price they say, is what price, the Chinese do not even have room for bargaining. Not only their Japanese equipment, but also other countries exported to China, as long as China cannot produce it, it is all a fixed price, and they never accept the bargaining of the Chinese.

Who told them that the Chinese can't produce it themselves?

And now it doesn't work, a four-axis machining center, they say three million, the Chinese give two million and eight million, don't sell? Let's find Jiuyi Heavy Industry!

What are the specific quality parameters of the four-axis machining center produced by Jiuyi Heavy Industry, which must be announced at the China International Machine Tool Exhibition.

Although it is not known what the price of the four-axis machining center delivered by Jiuyi Heavy Industry to the Chinese military is, everyone knows that it will definitely not be higher than theirs. (To be continued......)

PS: Thanks to the broken heart NO1 for the big 588 tip. Thanks to chy2 for the big two monthly passes, and thank you for the big monthly passes for the night readers.