Yun Fei didn't expect things to turn out like this, no matter what, he couldn't figure out where those machine tool manufacturers were looking for rotary turrets such as servo motors, ball screws, and high-precision positioning in a short period of time.

For a long time, Japan is close to China, especially in the northeast of China, so the first machine tool factory in the northeast has been purchasing CNC systems and CNC machine tools from Japan in small quantities. The first machine tool factory in Northeast China wants to purchase in large quantities, but the little devil is more cunning than waiting, how can the CNC system and various key accessories of CNC machine tools be exported to China in large quantities?

In that case, the export of the whole machine of the devil will be greatly affected.

With the emergence of the dragon CNC system and the rise of Huadu CNC, the devil can no longer be indifferent. Originally, several developed countries that have monopolized the control of CNC machine tools and CNC systems in the Chinese market, after spending a large number of CNC systems that are not worse than their mid-range systems, which have extremely disgusting names, began to appear in large numbers, and gradually let go of the control of low-end CNC machine tools and various key accessories.

Among them, the most important role in this is the devil's major CNC system manufacturers, FANUC, Mitsubishi and other companies. The emergence of locally developed CNC systems in the Chinese market is an accident, to know that the Chinese have been seeking their CNC system technology, it is impossible to quietly make a set of mid-range CNC system, not only lathe system, but also milling machine system.

With the system, China's CNC machine tool research will no longer be as limited as in the past.

Taiwanese sold a large number of CNC systems to Huadu CNC most important chips and other hardware systems, did not consider the feelings of the master, so the Japanese are very unhappy, but unhappy and there is no way to do things, in this era of economic globalization, the production of various CNC systems necessary hardware companies. It's not just Japan. Over the years, Taiwanese have been very close to their masters.

The Taiwanese had already gotten the production skills of those low-grade hardware years ago. Besides, if the devil wants to sanction the younger brother, he has to ask his master whether he agrees or not.

Therefore, the devil began to dump a large number of low-grade CNC machine tool parts in the Chinese market. In order to cope with the bad changes brought by the number of flowers to the Chinese market, the devil's mid-range CNC system has gradually begun to relax restrictions on China. Especially in Zhilu Road, the young man who made the rise of Huadu CNC at that moment ran to Rongcheng to get a mechanical processing factory, or a heavy-duty processing enterprise that produces machine tools, and has always looked down on several Japanese machine tool manufacturers in China's machine tool manufacturing industry.

In order to punish the young man who disrupted China's CNC machine tool market, and also to block the road of China's independent research and development, various accessories of the devil appeared in China. Accessories for the Taiwanese began to be supplied in large quantities.

The proud Germans don't care about the appearance of a CNC system manufacturer in China at all. Their system is the best in the world, and their CNC machine tools are also the best in the world. Even the key parts of CNC machine tools can not be produced by the Chinese, they do not believe that the Chinese can produce high-end CNC machine tools in a short time.

If it could be produced, the Chinese would not buy four-axis and five-axis CNC machine tools everywhere.

Through Ren Zhiguo, Yun Fei finally understood what was going on, and suddenly a lot of CNC machine tool manufacturers emerged throughout China. These CNC machine tools are the lowest-end EDM, wire cutting. CNC lathes.

After knowing what was going on, Yun Fei was extremely annoyed.

You can't take your own world for granted.

It is now ninety-three years old, and the GDR and the Federal Republic of Germany are at eye for each other. But it has not yet been merged, and the Berlin Wall has not yet been torn down; Bargochev of the Soviet Union remained in the Kremlin, which did not belong to him in his own world; Yeltsin was still working for his rights. The third Iran-Iraq war, which should have ended long ago, is still in full swing.

Yun Feizhidao, who has self-knowledge, is what this world is like now. It's not my own butterfly that appeared by accident and flapped its wings to change. At least, he has been in contact with foreigners until now. Except for Smith and others who pretended to be the Deere company's delegation, there was really no one else. It is even less likely to be related to the situation in the Middle East.

Bargochev did not agree to the referendums of several Mediterranean countries, as he did in Yunfei's world, and has been severely cracking down on the forces that divide the country. Although the entire Soviet Union is now in chaos, thanks to the efforts of the powerful Gorbachev, the sickle-hammer flag over the Kremlin is still flying high.

The Iran-Iraq war is still going on because Iraq has the support of the Soviet Union, and the United States, which originally supported them, has turned to support Iran. The Iran-Iraq war, which began in '80, was supposed to end in '88, but now it is about to be fought for five more years, and there is still no trend of ending.

Although the lives of the people in both countries have been in dire straits, both countries have rejected the mediation of the international community. Although neither country has declared the end of the war now, but only fired a few shots at each other's borders every once in a while, as long as the two sides of the border are still firing at each other, it is still a war, isn't it?

The Iran-Iraq war has not ended, each country has its own state support, and Iraq's Saddam Hussein did not invade his brother countries in 1992 because of his greed for Kuwait's wealth, as was the case in Yunfei's world.

This world is a strange world world for Yun Fei.

Although in many ways it is different from Yun Fei's own world in terms of major events, the techniques of this world world are still similar to Yun Fei's world.

Yun Fei has been learning about this world through Zhao Xingbang and Ren Zhiguo for a long time.

He only now realized that it had been almost two years since he came to this world, and he had never understood this world.

He misses his world very much, he misses Du Niang very much, and he misses everything.

Yun Fei didn't have the habit of reading newspapers, and in his world, newspapers were just things for the elderly who couldn't use the Internet to kill time. Du Niang is in hand, I have it in the world. No matter what kind of thing, Du Niang will tell you.

After coming to this world, although he knew that the Soviet Union had not collapsed from the time he learned that this world was not his own, Yun Fei still planned to rely on the historical development of his own world to look at the development of this world. In addition, the newspaper is only occasionally read, and he doesn't even watch TV, since he came to this world, Yun Fei has never been idle except for a day or two when he just returned to the depths of Daba Mountain.

In the busyness, time always flies so fast, and before I know it, I have actually come to this world for two years! Yun Fei sighed while rubbing his head.

"Shuang'er, inform the leaders of various departments to have a meeting in the conference room at half past eight tomorrow morning." After completely digesting these things, Yun Fei sighed, he had never experienced any major battles in his previous life, even when the company was acquired, he was a small technician who could not know how to operate it except for a small amount of inside information.

The products in the factory have just been produced, and they are facing such a bad situation before they are listed, Yun Feizhi said, now the only thing that can make Jiuyi Heavy Industry out of the predicament and escape the fate of bankruptcy as soon as the product is listed is to quickly develop a three-axis CNC milling machine and CNC machining center.

If Yunfei had not placed Jiuyi Heavy Industry in the Economic and Technological Development Zone of Rongcheng, he would not have faced such a dilemma at all.

The ordinary machine tool market in the entire southwest region, is firmly controlled by the South Yunnan Machine Tool Factory, Rongcheng is now far from having as many machining enterprises in later generations, the ordinary lathes produced by Jiuyi Heavy Industry, in this era, there is no fame, there is no big market at all.

CNC machine tools are all at the same starting point, but there is no fame of Jiuyi Heavy Industry, even if the production equipment is better than those old machine tool factories, but there is no fame, no old customers, there will not be much market at all. In this era, the cheapest price of an ordinary CNC lathe is at least more than 80,000 yuan!

In the era when the per capita salary has not exceeded 300, 80,000 yuan is still a huge amount of money.

In Yunfei's world, many small processing workshops with only one or two machine tools existed because of the machine tools of that era, although the price did not change much from this era, but the per capita wage at that time was more than ten times that of this era. Any person can come up with the funds to buy one or two machine tools, but it's really not good, isn't it possible to find a bank loan!

"Everyone, please come to the meeting today, I want to tell you that now our Jiuyi Heavy Industry is in a critical period of life and death!" After the heads of various workshops and departments in the company arrived, Yun Fei directly told the dilemma faced by Jiuyi Heavy Industry.

"Boss, don't you scare us, it's only a few days of good life?"

"Didn't we just develop a CNC lathe? The national CNC machine tool market has always been in short supply, coupled with the fact that our CNC lathes are not only of good quality, but also tens of thousands of dollars cheaper than those CNC lathes imported from abroad......"

Hearing Yun Fei's words, these middle and senior managers who had just received a few months of high salaries immediately became anxious.

"Quiet down......" Yun Fei slapped the conference table heavily, quieting the minds of the various departments who were talking to each other or questioning him loudly.

"Maybe we don't know the road, now there are more than 10 manufacturers of CNC lathes in China, aside from the first machine tool factory in Northeast China that has been producing, even if it is our neighbor, Yunnan Machine Tool Factory, their CNC lathes also appeared on the market half a month ago, today, I just want to ask, do the people in the marketing department only know how to eat? With such important information, why do we always know about it? No one ever informed me! What is the use of me keeping you? "For the management of the company, Yun Fei is really not good at it. (To be continued......)