Yun Fei's words told Wu Zhongda his purpose very clearly.

The development strategy of Jiuyi Heavy Industry is to give up some intermediate links with weak profits and high costs, learn from those large aircraft factories to select appropriate supporting factories for the procurement of various spare parts, and use the few resources and funds of Jiuyi Heavy Industry for market development and research and development of new products.

There is a popular saying in the world, first-class enterprises set standards, second-rate enterprises make brands, and third-rate enterprises make products. In the CNC machine tool industry, the fledgling Jiuyi Heavy Industry wants to achieve the first-class enterprise that sets standards in a short period of time, which is an unrealistic strategic goal. However, through its own efforts, it should not be too difficult to become a second-rate enterprise that does brand in a few years.

In this era, the opportunity is too good.

China's CNC machine tool market is still a blank, all industry standards are from abroad, there is no China's own standards. With the continuous development of foreigners' CNC technology, the threshold of the industry is getting higher and higher, so no matter how China catches up in this regard, it is not even a second-rate enterprise.

Just go to the era of Yunfei in the world to find a CNC machining technician to ask all know that no one is optimistic about domestic CNC machine tools. If it weren't for the fact that domestic CNC machine tools uphold the traditional characteristics and habits of products made in China - the price is cheap, it is estimated that there are not many companies willing to use domestic CNC machine tools! The largest market for CNC machine tools in China is not state-owned factories, but those that have sprung up like mushrooms after a rain, and there are small private machinery processing factories and machinery processing workshops everywhere!

If they have a choice, they will never choose those that will have some unexpected problems from time to time, for example, the problem of random coordinates in the processing process, and you can't find the reason after you stop. After processing, it's normal again! With such equipment, there is no problem in making some products with low cost, but to make products whose materials are counted in hundreds of dollars a kilogram, such as titanium alloys, high-temperature alloys, nickel-based alloys, etc., such CNC machine tools, as long as there is a little problem in the processing process, the entire product will be scrapped!

Maybe a living product has a processing fee of thousands or even tens of thousands, but the price of that material cost is definitely several times the processing fee!

A lot of people despise those who use foreign products. said that others are not patriotic, do not support domestic products, and even scolded angrily on the Internet. Yun Fei feels that such a talent is a real second force! Those who say that others use foreign high-tech products are unpatriotic people, and often use more foreign electronic products themselves!

It's not that everyone is not patriotic and does not support domestic products, if domestic goods can reach the price of foreign products, will everyone stick out their heads like fools and let others slaughter them?

Nima, buy a few hundred and a thousand things abroad. When you enter the Chinese market, you will immediately have to multiply several times, but it is still in short supply! For what? Because our domestic products can't support the Chinese market! Of course, it is not excluded that some second-hand goods who are really cheap. For example, you have to make a bag that is just used to satisfy your vanity and show off your status, a brand-name watch or something.

For a long time, the high-end industry of CNC machine tools has been dominated by foreign brands. This can't be blamed on others, but only for the domestic machine tool companies themselves!

How much of their taxes are exempted from the state each year? More than one-third of the profit per machine. What did they do with all this money? As soon as the Chinese people scolded, they said that the domestic materials are not good, the domestic production process is not good, and even the domestic climate is not good!

Why can't you do it? That's not because the expert called the brick family, and the professor became a beast! Nima, as long as a project is established, no matter how much money the state allocates, the project leader will send half of the price to ask the leaders who are in charge of allocating funds to the project to support a college student and send a child to study abroad. And then half of the remaining half is used to support college students by themselves, and if they change their cars, a quarter of them can be used for the research of the project, and the person in charge of the project is quite disciplined.

Do the Chinese have ethics?

It can only be said that there must still be ethical people in China! If it weren't for them, our country would have developed so fast?

Of course, more are the Chinese who have lost a place. Otherwise, there would not be a normal situation in which many beasts become famous, many women become angry as soon as they get off, and many officials fall off their horses as soon as they sleep.

The Chinese are terrible! At least, in terms of corruption, the corrupt officials, the woman who became famous in terms of shamelessness, the plagiarism became a habitual beast in terms of thick skin, the principal who raped the young girl who raped the underage girl, did not dislike the young age of elementary school students, and so on, so that the entire world of the country can only remain silent! This, even the devil country, which is known for its cheapness in the entire world, does not dare to compete with China!

The world's largest country!

What others do, Yun Fei can't control.

Jiuyi Heavy Industry is Yunfei's territory, Yunfei's territory, and Yunfei is in charge.

Therefore, the minimum standard of Jiuyi Heavy Industry must become a second-rate enterprise to do branding. Perhaps, it is not impossible to achieve this goal and engage in standards.

Of course, whether it is a brand or a standard, these are too far away.

The most important thing now is to make your own products. Jiuyi Heavy Industry's CNC lathe, at least, will not be too criticized. Otherwise, Sun Lin and Situ Heyun, two old goods, would not have let go of the academicians who had just been established, and went to Jiuyi Heavy Industry, a small machine tool factory that had just been established, to work hard and be a cow and a horse! At least, Yunfei, a private boss, has far more investment in R&D than the Capital No. 1 Machine and the Northeast No. 1 Machine, which are dozens of times the scale of Jiuyi Heavy Industry.

Originally, after the completion of the simple fourth-axis project of installing PMC drive module control on the three-axis machining center that cooperated with the military last time, the two old guys should take their apprentices back to the Capital Machinery Institute. However, these two veterans gave up their research project in the mechanical institute with little research funds and stayed in Jiuyi Heavy Industry.

Even when the CNC lathes of Jiuyi Heavy Industry quickly occupied half of the domestic mid-range CNC lathes, Yunfei still did not give up the research on new CNC machine tools. Now more than 30% of the profits of Jiuyi Heavy Industry every month are invested in the research of various CNC machine tools. Not to mention anything else, just the tool magazine project of the machining center, so far, the sum of the front and back, has invested millions of funds!

Now the ten-knife precision CNC lathe has more than one million research funds every month!

Similarly, the research of CNC milling machines is also in full swing. If it weren't for the purpose of seizing the market and forming a good reputation in China, Yunfei would not even let the CNC milling machine with a speed of less than 5,000 revolutions per minute and a fast-moving speed of less than 10,000mm per minute be put on the market. Although, such a CNC milling machine, when the domestic is still relatively blank, can already be regarded as a relatively good performance.

"The development direction of CNC milling machine must be high speed, high moving speed, so don't think that we are now on the basis of the original maximum speed of less than 5,000 rpm, and increase to the current 6,000 rpm, and the tail will be warped to the sky! Although the capital machine is now taking the wrong road, it won't be long before they wake up, because their current model, no matter how they do it, can't raise the speed very high, 8,000 rpm, is the limit of their CNC milling machine! Let me tell you a piece of news, those CNC milling machines that do aviation aluminum and non-metallic materials abroad have a speed of 30,000 revolutions per minute! For the milling machine project team of his R&D department just increased the spindle speed to 6,000 rpm, he came to Yun Fei to apply for a special fund for the celebration party, Yun Fei said with a serious face to Duan Hu, the project leader seconded by the military.

"......" Hearing Yun Fei's words, Duan Hu was full of black lines on his forehead.

He wasn't such an arrogant person, but he was encouraged by the guys from the Soviet Union in the project.

Everyone knows that Yun Fei, a young boss, is very talkative, as long as you can make achievements, create benefits for the company, and ask for activity funds, it will not take much effort.

"If you can increase the spindle speed to 15,000 rpm, I will personally give you a celebration party!" Yun Fei said to the back of Duan Hu, who was leaving with black lines.

"Nima, if you increase the speed of every 1,000 revolutions, you will have a celebration, if in the future, our own CNC milling machine spindle speed can reach the level of more than 100,000 revolutions per minute abroad, how can we have so much time to celebrate!" Yun Fei secretly praised his reflexes.

At this initial stage, the speed increased from less than 5,000 revolutions per minute to 6,000 revolutions per minute is indeed a great technical leap, especially the spindle transmission of the CNC milling machine used now is still the gear transmission and belt transmission mode in the conventional sense.

It's not that Yun Fei doesn't want to engage in the electric spindle, but now he is engaged in the electric spindle that counts at 10,000 revolutions per minute, which is undoubtedly a fantasy. When Yun Fei proposed the electric spindle, even Situ Heyun and Sun Lin didn't know what the electric spindle was! Even abroad, it will not be successful until 2,000 years later. This is not only a very high requirement for materials, but also a very high requirement for testing equipment.

Imagine that a shaft weighing several kilograms rotates at a speed of tens of thousands or even 100,000 revolutions per minute, if the dynamic balance is not in place, even if it is only one or two Nm of torque, it will be expanded to tens of thousands of Nm, or it will be twisted for a long time and at a high frequency, if the shaft is broken, who can afford such consequences? (To be continued......)

PS: Thank you for the tip of the Demon Dragon Warrior Brothers!