"Boss, do you want to ......" Jing Hong's words, but when he got to the back, he stopped.

He didn't think that the young boss in front of him had the ability to eat the Jinling Machine Tool Factory with courage. Although Jinling Machine Tool Factory, a lot of equipment is seen after the fifties and sixties, and even some are supported by the Soviet Union before the founding of the People's Republic of China, in this era, how can it be tens of millions to get it.

In the past two years, Huadu CNC has made a lot of money, and there are more than 20 million loans in the bank. If these shareholders want to share the money, they basically don't count on it in the short term.

Yun Fei stared with interest at the new helmsman in front of him, who had just entered Xinkaixing, trying to see something on his face, but he only saw a look of disbelief on the face of the young new manager.

"For a factory with no innovation ability and extremely weak design ability, as long as the head is not caught by the door, who will be full of food to hold on?" Yun Fei said lightly to Jing Hong. For Jinghong, he was really a little unsure, so he introduced so many restrictive measures, and put several shareholders in the factory to monitor the operation of the entire factory.

Wang Qingfeng was very dissatisfied with Yun Fei leaving him here. He thought that he was now used to running around, and it was more uncomfortable for him to stay here honestly and keep an eye on the new management of the factory than to kill him. What's even more excessive is that Yun Fei actually called the Northeast and called Zhang Rui here......

"Then why are you inquiring about Jinling Machine Tool Factory?" Jing Hong was surprised, could it be that this boss was full of food and support? Or is it that the flowers are all over the place for the past two days and you have suffered from heat stroke?

"I don't want their factories and equipment, I want their people, you can introduce me to the Jinling Machine Tool Factory, especially the technical workers in the First Machine Tool Factory......" Yun Fei said lightly while looking at the desktop with his hand.

For a long time, Yun Fei has fallen into a misunderstanding. He was always waiting for those state-run factories to go bankrupt. But I forgot that before the bankruptcy of those state-owned factories, the technical workers of those factories began to lose a large number of them, especially those who had first-hand skills and had great pressure to support their families.

"Jinling No. 1 Machine Tool Factory, three months ago, has been completely suspended, the factory has a total of more than 300 general types of work, more than 600 special types of work. The factory has a total of 14 fitters above level 8, two millers, only one level 8 turner, and most of the workers are at level 5 to 6. The efficiency of the factory has not been very good, especially in these years, so the apprentices rarely ...... "I have been mixed in that factory for several years, and the situation in the factory." How can you not understand? Even if he is only a workshop director, it does not prevent him, the workshop director, from understanding the situation of the entire factory.

Not many people want to know how many people are in a factory, especially one that is largely at a standstill. How many devices there are.

"Jinling No. 1 Machine Tool Factory machine tool production technology, are the 60s technology, has been, there has been no factory director to put energy on this independent innovation. Even some changes were made to the design. In the era of economic planning, the lathes produced by Jinling Machine Tool Factory cannot be compared with those large-scale factories with strong technical strength. It is all produced according to the plan arranged above, no matter whether the equipment is easy to use or not, there will be factories rushing to ask for it. The character of the uncle cultivated over the past few decades does not have any strength at all after gradually entering the market economy. The more products are produced, the more backlog there is, and in the end, the more production and the more losses......" Jinghong sighed when he talked about the factory where he was originally located.

In the past two years, the discussion on the issue of surnames and surnames in China was very hot, because of the new rise of private capital, the production of many state-owned enterprises has basically come to a standstill. Just like now, in the Chinese market, on the one hand, there are many experienced state-owned enterprises with high production capacity, which have fallen into the realm of products that cannot be sold; On the other hand, private enterprises are in a hurry because of the shortage of workers, poor technical strength, and the backlog of product orders.

"Jinghong, in the Jinling Factory, are there many people like you who come out to break through?" Yun Fei didn't want to listen to Jing Hong's sighs about their original factory, and directly asked the question he was most concerned about, that is, whether those workers were willing to come out.

"Not much, many people, are guarding the factory, most of the workers in the factory are old, unwilling to move...... Jinghong himself is actually unwilling to move, if he is not forced to have no way, he will definitely not go to the sea, run to the gold everywhere to find an opportunity to make a fortune.

Even if he was lucky, he actually met Xin Kaixing, who was recruiting people with rapid development momentum, and was also favored by Yun Fei and became the general manager of Xin Kaixing, with an annual salary of 60,000 yuan.

Sixty thousand!

In Jinling Factory, a salary of less than 100 yuan a month is less than 200, even if it is added to double the bonus, it is only four or five thousand yuan a year, here, you can earn the original year's money in a month! Of course, this must be passed by the probationary period, otherwise, where does it come from, where does it go.

"It's not that they don't want to move, it's that there's not enough price for them to move!" Yun Fei scoffed at Jing Hong's words.

is about to leave Huadu and return to Rongcheng, the first batch of CNC milling machines produced by Jiuyi Heavy Industry for the market is about to be finalized, such an important moment, if his boss is not in the factory, it is a bit unreasonable.

After all, the most rear-end assembly and debugging need to be watched by Yun Fei.

Although Yun Fei borrowed a few technicians from Huadu CNC for system debugging, he had to do it himself. The time is too short, each batch of experimental machine tools, between two and four, just two or three months, there is no way to train qualified machine tool debugging personnel. Most of the machine tool debugging personnel trained by Huadu CNC are for CNC lathes, and in terms of CNC milling machines, it is also an unfamiliar field for them.

Moreover, those people are not very familiar with the understanding of machine tools.

"Xiaoyun, you can be regarded as back......" Seeing Yun Fei take Ni Lishuang, who was wearing a white shirt on his upper body and a tight short skirt over his knees, to the CNC machine tool assembly workshop, Situ Heyun and Sun Lin both greeted him.

"......" Yun Fei didn't expect that these two old guys would be so enthusiastic about themselves!

Nothing to be courteous, either a traitor or a thief!

"Is the assembly complete?" Yun Fei ignored these two old goods, who knows if these two old goods did something difficult to process from the Machinery Research Institute and brought them here to organize their skills and technical strength to tackle key problems?

Nima, help them study all kinds of machinery manufacturing processes, in the end, they don't need much here, but let them get cheap in vain. Yun Fei also knew that these two old goods rely on themselves, to a large extent, because of their understanding of CNC machining technology, if this continues, Jiuyi Heavy Industry will become a scientific research factory under the Machinery Research Institute.

"The assembly has been completed and the commissioning of the machine is now underway. Just let your boss take a look, and then finally make a final decision. After you read it, if you think it's okay, our CNC milling machine can be finalized now...... "For the entry CNC milling machine, Sun Lin doesn't feel how difficult it is.

9327, the predecessor of Jiuyi Heavy Industry, although the cost of machine tools produced is high, but the technical reserves are still sufficient, especially the production technology of some machine tools, otherwise, the military will not build such a factory in the mountains in case of emergency. Even if you encounter any technical problems that Jiuyi Heavy Industry can't solve, you can also run back to the capital through two old goods to find their brothers or apprentices and grandchildren to help, or move some technical materials that Jiuyi Heavy Industry does not have to the archives of Jiuyi Heavy Industry.

In exchange, Yun Fei's Jiuyi Heavy Industry had to help those guys in the Machinery Research Institute solve some problems that were not easy for their technical workers to solve. This does not mean that the skills of the workers of Jiuyi Heavy Industry are higher than those of the workers in the test workshop under the Machinery Research Institute. But when it comes to experience, those under the Machinery Research Institute are only used to do some test product workshops, and there is no way to compare with Jiuyi Heavy Industry.

Yun Fei was originally born in CNC machining, and his vision is broad enough in terms of the complexity and machining accuracy of the parts he sees; Dozens of top skilled technicians from the Soviet Union, as well as the top technicians left behind in the 9327 factory, are all engaged in single-room small-batch production.

"Run a few more times, especially the taper when the Z-axis stroke moves up and down, this is related to the machining accuracy...... "After installing the CNC system, the professional data clerk will input the basic parameters left by the clouds, and the machine tool will be under the control of the debugging program, front and back, left and right, up and down quickly run together.

While staring at the movement of the machine tool table, while staring at the changes in the data on the display screen of the CNC system, when the problem is found, immediately press the red stop button on the system, re-enter some data and then start.

The commissioner adjusts the parameter settings of the machine as it moves continuously.

"These four CNC milling machines, after the commissioning is completed, will be moved to our new CNC workshop to put into production, in this way, we are short of manpower, we can solve part of it, although it is a drop in the bucket, but it is better than nothing...... "CNC milling machine can be listed, but there is nothing worth making Yun Fei happy."

CNC milling machine is still a long way from the machining center. (To be continued......)