"Ding......

The sudden ringing of the phone interrupted Yun Fei's contemplation. Yun Fei retracted his memories of the past few months when he came to this era, and reached out to the phone that had just been installed on the side for a short time.

"Hey, yes, I'm Yun Fei, who are you?" As soon as the phone was answered, the other party directly asked to find Yun Fei, the deputy director of Yun.

"Oh, Cammat Corporation? It's good, no problem......" After a while, Yun Fei put down the phone.

The call was from Kamat's side, informing Yunfei that Cammat Company would take a few customers to Qingfeng Machinery Factory on Monday, that is, the day after tomorrow to inspect the CNC machining capacity of Qingfeng Machinery Factory, and to say hello in advance is to make Qingfeng Machinery ready.

Just from the last time Qingfeng Machinery to the Cammat company to do the batch of 100 pieces of stainless steel thin-walled parts, the two have established a cooperative relationship, every month, Qingfeng Machinery CNC workshop more than half of the CNC machine tools are in the dry Camat company's foreign trade workpieces. And Yunfei, basically more than ten hours a day in the CNC workshop, not only for those workers who have been able to work independently, but more importantly, is to prepare the processing technology of parts and the production procedures of CNC machine tools, of course, these expensive CNC machine tools have to be repaired after problems. Although I took two apprentices to learn the maintenance of CNC machine tools with myself, the maintenance is not like the operation, and there are many contents from the design to the mechanical and electronic aspects, which is not difficult to learn in a short period of time.

The profit of 200 stainless steel foreign trade parts per month has reached 240,000, which is about to catch up with the net profit of Qingfeng Machinery for a year before Yunfei came.

At the beginning, Cammat saw that CNC machining was so profitable, and used their foreign connections to build several CNC machine tools. After the equipment arrived, it was found that the CNC technicians they recruited only knew the basic operation, and the CNC machining technology of complex parts and various special requirements for foreign trade workpieces could not be achieved in many cases.

Just the stainless steel thin-walled parts, the finished product they made is only 30%. The main reason is that the deformation problem of stainless steel thin-walled parts cannot be solved.

The products produced not only failed to meet the requirements of the other party, but also lost a lot of money because of the high cost of special imported materials. It just so happened that Wang Qingfeng collected CNC machine tools in the world, and could only transfer all eight CNC lathes from Japan and Germany and two CNC milling machines from Siemens to Qingfeng Machinery Factory.

This made Wang Qingfeng very happy, and after completing the first batch of 100 pieces of stainless steel thin-walled parts of the Cammat company, the other party gave a large order of hundreds of pieces every month. In addition, the original customers have a lot of spare parts that need CNC machine tools, and after hearing that Qingfeng Machinery has now begun the production capacity of CNC machining, they all threw it to the salesman of Qingfeng Machinery.

Wang Qingfeng, who was urged to deliver goods by customers every day, was overwhelmed, and when he saw the olive branch of the Camat company, he was like a hungry dog seeing the food and pounced fiercely, regardless of whether the food was good or bad.

Originally, there were a lot of second-hand classic machines on the market, but the price was very expensive, just a second-hand small CNC lathe equipped with FANUC system 6132, others quoted 150,000 or 60,000, and bargaining was not allowed. It's a pity that these devices can't dry Cammat's stainless steel parts.

The CNC machine tools of Cammat company were transferred to Qingfeng Machinery, which was also for long-term cooperation in the future, and the price was still relatively kind.

Japan's Toshiba company's FANUC system simple number of cars, 162,000 units, DMG company's Siemens system CNC car, a lot more expensive, 198,000. The most expensive are the two CNC milling machines of DMG company, which reached 370,000 yuan that made Wang Qingfeng's heart ache. Originally, he didn't plan to ask for the two CNC milling machines, but Yun Fei insisted, so he could only move the two CNC milling machines back from the processing plant in Kamat.

Camat originally did everything, from the CNC machine tool to Qingfeng Machinery, it saw the huge profits, and spent most of its energy on the CNC machine tool trade and to make high-precision complex accessories for foreign companies. At the same time, it signed a long-term cooperation agreement with Qingfeng Machinery.

As for Yun Fei's presence in Qingfeng Machinery, the people of Camat Company also knew about it through that batch of stainless steel thin-walled parts. When they first started to make thin-walled parts, they came to Qingfeng Machinery to ask for advice.

Wang Qingfeng didn't know much about the thin-walled piece, so he directly brought the people from Cammat Company to Yun Fei. Yun Fei only used the terms elastic deformation and plastic deformation to make the two CNC engineers of Camat put away their contempt for this little child.

Although they have been in contact with this industry for a long time, and have worked in state-owned enterprises for several years, state-owned enterprises are not like private enterprises, where operators can only work as operators, and are not even allowed to program! After all, the CNC equipment in the state-owned factory was brought by a lot of valuable foreign exchange back then.

In this era, not many Chinese people understand the difference between CNC machining and ordinary machining, so Yun Fei is not worried that the people of Cammat Company will not work after understanding. After all, in China in the early nineties, the CNC machining market was not as common as in later generations. All CNC machine tools are 100% imported, not only the high price makes private machinery factories that want to launch CNC machine tools prohibitive, the country has not yet liberalized the foreign exchange policy. Again, you have to rely on the relationship, imported CNC machine tools, in this era, is not to be bought if you want to buy, especially in Chinese mainland.

Yun Fei's explanation is incredible, and the two CNC engineers of Camat Company ran back to resign on the same day, and had to follow Yun Fei to learn CNC technology. Originally, Kamat was going to dig Yun Fei into his company, but the super high salary of 5,000 per month was rejected. In desperation, Camat Company not only sold the equipment of the processing plant to Qingfeng Machinery, but also sold more than 20 workers and technicians to Qingfeng Machinery at a friendly price of 10,000 yuan.

The talent deal between the two companies is estimated to be the earliest talent deal in China.

For the customers brought by Cammat, Yunfei has to pay attention. It is important to know that even if the Camat company is not a salesman of a foreign company, at least it is a foreigner of a foreign-funded enterprise.

If the processing quantity is not too large, the customer will not ask to inspect the processing environment.

"Director Yun, I'm back." Before Luo Xiaoli entered the door, she came to the office with an excited voice.

"How many times have I told you, as a secretary, every word and deed represents the leader and the image of the factory, what kind of system have you become!" When Luo Xiaoli entered the office, Yun Fei said with a straight face.

"Yes, yes, the leader has to teach me a lesson, and I will pay attention to it in the future." Luo Xiaoli immediately returned to her seriousness. Although it has turned positive, as long as the cloud tyrant says a word, he has to pack up his bed and leave! It's not easy to turn positive, the high salary of six hundred and five hasn't been received for a month, don't get carried away and be driven away by the cloud tyrant, if that's the case, the sins of these months will be in vain.

"You go to the workshop to inform them, give me to rectify the environment in the workshop according to the 6S management requirements before getting off work today, and next week there will be foreigners to inspect the company, if anyone is still as perfunctory as before, don't blame me for not being emotional." Yun Fei rarely explained what he asked the people below to do so.

"Okay, leader, I'll notify you immediately." Luo Xiaoli suppressed the joy in her heart and went to the workshop.

"This girl, there is a lot of progress, and it is still far from maturity......" Yun Fei shook his head with a wry smile, took out a Hongta Mountain, and prepared to continue to draw the upgraded control chip circuit diagram of GSK928 after drawing.

He didn't dare to take out the chip system that was too advanced, if it came out this year, Farak and Siemens would definitely join forces to strangle the manufacturers who had mastered these industrial control chip technologies, so that the CNC industry that had not yet risen in China was estimated to not even reach the level of the previous life.

For the GSK928 system, what he has to do is to improve the defects of the system itself to make it reach the level of Siemens and Farak systems.

Before the domestic CNC industry has not reached a certain scale, it can only follow the trend to launch a domestic system.

"Everyone, stop for a moment, I have something to tell you." As soon as Luo Xiaoli entered the machining workshop, she opened her throat and shouted.

"Xiaoli, you're so excited, shouldn't there be anything good to announce?"

"Dragged on? Do you want to invite us to eat candy......"

"Xiaoli, you shouldn't have hooked up with the cloud tyrant, right? Dare us stop at work time......"

……

"Xiaoli, just tell us a few things directly, this is so much work, this delay, I have to work overtime at night." Yang Dezhi was scolded by Yun Fei in the morning, so he naturally had to be careful.

"Okay, everyone listen, Yuntou asked me to inform everyone that we should do a good job of 6S before getting off work, and there will be a foreigner inspection next week." Luo Xiaoli ignored the teasing of the young people, and waited until everyone gathered around her before happily announcing it.

"Isn't it? She actually shouted Cloud Tyrant Yuntou? ”

"Xiaoli, tell me honestly, did you seduce the cloud tyrant to bed?"

"Xiaoli, the cloud tyrant forced you, right? Tell my brother that if this is the case, my brother will not work hard, but he will also stand up for you......"

……

"Stop ......" Luo Xiaoli was made to laugh and cry by the young people in the workshop. It seems that people who are used to high-pressure rule really can't be too nice to them.

Luo Xiaoli said to everyone with a straight face: "Yuntou said, if you are perfunctory like before, you don't have to wait for Monday, you can pack up your own sheets and leave today." By the way, the old lady just seduced the cloud tyrant to bed, that's also the old lady's ability, do you care? ”

After finishing speaking, he raised his head and left the stunned workshop.

For mobile phone users, please read it on m.biquge.info.