THE REASON WHY LI YIFAN HAS SUCH A STRONG DESIRE TO GET THIS 3DSYSTERMS IS MAINLY BECAUSE OF THE COMPANY'S FUTURE PROSPECTS AND SEVERAL UNIQUE TECHNOLOGIES HE HAS MASTERED.

The future 3DSYSTERMS company, after the acquisition of zcorop, because the technology has been supplemented, so the strength has risen sharply, plus they have received the support of the US government, so they have increased their research and development efforts, so they soon made a series of major breakthroughs in 3D printing technology, which is particularly powerful is their metal parts molding process, which can be said to be unique in the world.

LATER, THEY ALSO FORMED ANOTHER JOINT VENTURE WITH AN OBJET IN ISRAEL TO FORM ANOTHER STRATASYS COMPANY, WHICH ALONE AND THEIR COMPANY ACCOUNTED FOR MORE THAN 80% OF THE WORLD'S 3D PRINTER MARKET.

Later, after they were listed on the New York Stock Exchange, their performance in the market was particularly eye-catching, which is the main reason why Li Yifan firmly wanted to control this company in his own hands.

Just when Li Yifan and Heidi were discussing how to annex the giants of the future 3D printing industry in the United States, Hu Bin and Yao Chongshan were also discussing digging a pit for the Japanese on the Hanzhong side.

During this time, the two were entangled together, one was a good teacher and the other was a good friend, and soon they became close friends because of their common hobby in the field of scientific research, although the age gap between the two was more than ten years, but this did not prevent the two from calling each other brothers.

Hu Bin is a pioneer in the field of 3D printing, and he has his own understanding of this field, but he has figured it out by himself after all. I didn't get professional guidance. In addition, these two years are because of livelihood. Therefore, I don't have much understanding of the current development trend of 3D printing technology in the world.

Yao Chongshan just came back from the United States a few months ago, and just learned about some of the latest trends in the development of 3D printing technology in the world, and also systematically learned the fundamental knowledge of 3D printing technology, so he has his own plan for the future development of this technology.

This is exactly what Hu Bin lacks, but on the contrary. As a pioneer in 3D printing technology in China, although Hu Bin is not strong in theoretical knowledge, he has his own insight, especially in terms of practical experience, he is far stronger than Yao Chongshan.

What's more, he also has a metal powder sintering printer that he has developed a long time ago, and in the past few days, the two have been circling around this printer, and then understanding each other, discussing, and knowing each other. Introduce to the other party, so that. Regarding this new technology field, it can be said that both of them have made great progress and progress.

And for the development of 3D printing technology in the future, they also have their own development and planning.

After summing up in the past few days, they have sorted out their clues and have a general plan for their future development.

Theoretically speaking, the future development of this 3D printing technology will be divided into three types according to different materials, and these three types will also derive three different processing methods.

The three most basic materials for 3D printing technology are liquid resin, plastic powder, and metal powder.

According to the difference of these three materials, the development of 3D printing technology will also be divided into, SLA for liquid resin, liquid lithography.

For plastic powders, the SLS method, that is, the layered laser sintering method, and for metal powders, the FDM method, that is, the melt deposition method, will be derived.

Of course, there is also the DSPC, the ceramic shell method, which was born later for ceramic powders.

Later, various processing technologies such as the LOM method will be born.

During this time, Yao Chongshan introduced the future development model of 3D printing technology that he knew about the world's mainstream and latest 3D printing technology to Hu Bin.

According to his introduction, Hu Bin also divided these various processes and planned their main research and development directions in the future.

The first thing they plan to study is the SLA method applied to plastics, which was already used by Hu Bin's small factory when making handicrafts.

It's just that the technology is not perfect, because there is no system theory to guide it, so there will always be technical defects of one kind or another.

For a long time in the future, this SLA method may be the most mainstream area for the application of 3D printing technology, although the best way is to belong to the FDM method for metal powder.

And Hu Bin has also made a small breakthrough in this field, and now he can use such technology to do metal forming, but now his technology is still too rough, and there are still many small flaws waiting to be perfected.

In fact, more than ten years later, the United States and China have mastered such technology, especially in some military fields.

However, because the sensitivity of this technology is too high, no one has put this technology into the private sector, because once it is put into the private sector, the consequences that this technology can bring are really unimaginable.

Think about it, if anyone could use this technology to make firearms, what if they could?

What kind of planes, tanks, etc., don't think about it first, just someone uses such technology to make firearms, I'm afraid it will give many governments and countries in the world a headache, so of course, everyone doesn't dare to come up with such a sensitive technology.

It can only be applied in some areas of national defense and military industry, so such technology can only be considered in the long run, because he is too sensitive.

The SLS method for resin powder is also very important, as well as the DSPC method for ceramics, which are also the main directions they should focus on.

After all, in the future, this 3D printing technology, applied in the industrial field, should first face the casting mold, and these two technologies are very critical to the manufacturing of models.

Therefore, these two technologies are also the main directions that need to be studied in the future.

However, while studying these technologies and the future development direction, the two did not forget the task assigned to them by Li Yifan, that is, to dig a pit for the Japanese.

Hu Bin is an old fritter, and there are many technologies in the hands of the Japanese that he covets, especially the assembly process of the Japanese, as well as some unique skills of the Japanese, such as the transformation of Nikon engineers and positioning technology.

If you want to produce a sample, then you must pay special attention to the accuracy, and at the same time use incremental processing technology, the requirements for positioning technology must be very in place, and this aspect is not our specialty, but it is the specialty of these Japanese engineers......

"I'm sorry, Mr. Koike, but our machines and technology are still a little bit under-the-top, which caused this failure. Well, let's wait for us to work on it for a while, and when our technology stabilizes, let's explore these technologies, what do you think? ”

The model of a Buddha statue in front of me looks like a mess, obviously it is just a level of resin powder that is just one level higher than liquid plastic, but this is it, the 3D printing technology of these Chinese people is a mess.

Looking at the slimy resin material on the nozzle of the machine, and the ugly Buddha statue below that I don't know what shape it is, Xiao Chi Yifeng smiled coldly in his heart, what good things can the Chinese people research.

It seems that before, I was too gullible to be trusted, so I believed that they had the world's leading 3D printing technology.

Koike Yifeng is a technical expert from Nikon this time, specifically to understand the depth of China's 3D printing technology, before the Americans boasted greatly, but they also have studied this 3D printing technology of the Japanese, because they have suffered several losses from the Americans before, so they don't believe in this technology too much, not to mention that after personally studying this technology, many Japanese experts think that this technology is a gimmick, it is a chicken rib, and there is no future for development.

But I don't know how to learn that someone in Huaguo has developed such a machine, so they came with the attitude of coming over and trying it.

As a result, after arriving in Hanzhong, they couldn't help but be disappointed, originally they heard that the 3D printer developed by this Huaguo professor can do metal processing.

But when they arrived, they found that this was not the case at all, and that the professor had been kicked out of school and was now running a small craft factory on his own.

And his so-called 3D printing technology that can process metal is actually just a 3D printer that can process the simplest liquid plastic, this thing has actually existed in Japan and the United States for a long time, nothing new, as for the metal 3D printer, it seems to exist in the legend.

It seems that they have fallen for these Chinese people again, and they like to brag the most.

The Japanese have always liked to study the habits of the Chinese people, and this has been the case since before World War II, and it is still the case now, because they have always regarded the Chinese people as the enemy of life and death, so they are very familiar with many of the bad habits of the Chinese people.

And these Chinese people, as always, are as stupid as ever, when Koike Yifeng came to Hanzhong with his team of engineers, found the Huaguo professor, and proposed to learn about his 3D printing technology, this guy was not at all defenseless, but gave him a small benefit, and this guy actually agreed to open the technology to them......

This really surprised Koike and his team, as a backward country of China, did not even have a sense of patent protection...... (To be continued......)