From the car trust home website, after the launch, he began to pay attention to this website, this website has launched several topics in a row, all of which are very interesting, and it can even be said that the topics of each issue are very novel, all of which are from an angle that everyone has never seen before, to promote or judge a product.

And now this website has created a precedent, that is, it actually starts from the most basic aspect, introducing an automobile factory, and it is also a factory of domestic cars, this angle of entry is very novel.

Even today, when automobile culture and knowledge have begun to be slightly popularized, there are still many consumers who do not understand the whole process of how a car comes off the production line.

However, this article starts from this perspective, unveiling the mystery that has been hidden from ordinary consumers in the past, so that consumer groups can understand how a car is produced and manufactured from the most basic perspective, which makes many people feel very novel.

At the same time, in the background of the car trust home website, the technicians looked at the rising click rate, and they were also clapping their hands to celebrate, and this plan was successful again.

"When you're building a car, the first step is to open the steel plates, stretch them, stamp, and then cut them into shape.

This requires very powerful stamping tools, and in the production workshop of Chenhua Automobile, we see the 10,000-ton stamping equipment from Schuler in Germany, which is very sharp and very advanced, using 6-sequence servo motors to control zhì, which can complete the work of entering thousands of stamping workpieces per hour. His accuracy is able to reach the lowest 0.2 mm and the fastest speed. It can reach 17 stamping cycles per minute. The production efficiency is three times that of the stamping equipment used by the current domestic mainstream car companies. And the accuracy is even higher. According to our understanding, this large-scale stamping equipment, in the world, belongs to the top level of products, and in China, there is no doubt that it is also the top level, as far as the author knows, currently in China. This is the first set of such stamping equipment, and the second set in the future will appear in the joint venture factory of BMW, another joint venture car company in the provincial capital. Even German companies like Volkswagen have not yet used such advanced equipment in China......"

When he saw this, Mo Xiaobei couldn't help but feel a little stunned, if it weren't for the tall equipment that looked silver in the clean and abnormal stamping workshop in front of him, he would definitely not believe it. Such world-class equipment will appear in the workshop of a factory that is still unknown in China.

It's kind of incredible. However, it also makes people feel more down-to-earth, such a company can have such tall equipment, so how reassuring should this company be to produce products.

Although I don't know what the models produced by this factory look like, but everyone's appetite has been hoisted, just looking at the equipment they have, everyone has reason to believe that this factory is not a product of the same level as Geely or Chery.

You must know that other reporters have said that the stamping production line they use, whether it is efficiency and accuracy, is currently the top in China, even BMW only intends to use such equipment.

Doesn't that mean that this car can belong to the same grade as BMW, if nothing else, that is, this body frame?

Of course, this is a bit of a suspicion of changing the concept, but Chinese people like Lenovo like this way, especially when a product and an internationally renowned brand are a little marginal.

Many people who were not interested in Chenhua Automobile couldn't help but cheer up and continue to look down at this time.

"After the stamping is completed, the various workpieces are put on a conveyor belt and sent to the quality control hall, where the quality inspectors inspect each workpiece. And here, I have to admit that the quality inspectors used in this factory are definitely the most professional among all the automobile manufacturing enterprises I have been to so far. First of all, they will test the flatness and smoothness of the surface of the workpiece, and after all are qualified, they will enter the next link, that is, to use the diameter reduction ruler to detect the thickness of the workpiece, and then use vernier calipers to inspect the size of the process holes, etc., a series of complex and strict tests, and finally the products detected are divided into three kinds, the workpiece is repaired, the workpiece is qualified, and the workpiece is scrapped, and then each inspector will mark their work number on the product they inspect, so that the product quality report can be traced back in the later stage. With such a strict quality inspection system, I believe that the quality of the products they produce will also be very good......"

This reporter has made a lot of reports on the following series of quality control systems, a series of photos, and text introductions, which can't help but make people have an inexplicable sense of trust and goodwill towards this automobile factory.

Because of such an open external publicity of this factory, it is the first time for everyone to meet, such a bright and clean factory, which already makes people have a good impression, coupled with such a strict quality inspection system, it makes people more confident in this factory.

"After the stamping and forming of the whole vehicle plate and profile, we will see that the stamping qualified workpiece will be sent to the welding workshop behind by the automatic conveyor belt, and in the welding workshop, it is to surprise us, because we have never seen so many automatic welding machines in any automobile production plant in China, and in the whole welding process, we don't even see a worker, the whole welding, more than 5,800 welding joints in the whole car, about 97% will be completed by the machine. Such a high automation productivity can be said to be unique in the country in our opinion. Based on the author's experience in this industry for so many years, it seems that only the BMW production line in Bremen, Germany, can complete the automatic welding production efficiency. According to the information I inquired, the 600 welding machines used in this factory are the same as BMW, and the highest-level welding production line from ABB in Europe is purchased. Although we haven't been able to see their terminal products at this time, I am already very curious about their products, and even have a feeling of impatience, after all, the use of such high-end equipment, the production of products, and it is also a domestic car, what level can be reached, it is very exciting. ”

When many readers see this, they are also full of curiosity about the products of Brilliance Auto, just like the author who wrote this article, and everyone wants to know what their terminal products are like.

After all, just by seeing this, everyone has already seen a lot of tall equipment, and the reporter who wrote this article is really attentive.

He not only put the photos they took at the Chenhua Automobile Factory in the article, but also interspersed with a lot of photos of foreign automobile factories, especially those from Germany, although these photos are also from foreign websites, but everyone can at least make a very clear comparison.

You must know that the products produced by other factories are either BMW, or world-famous cars such as BENZ, and ours is a little-known domestic brand.

And our domestic brand, with the same tall equipment as internationally renowned brands, how sincere the enterprise must be?

In China, even if it is a state-owned enterprise at the level of two leading big brothers, there is no such equipment, let alone any sincerity?

Everyone can't help but continue to look down, the pictures of this article are interspersed with the style of text introduction, and there are several comparison photos of the factory production of well-known foreign brands posted from time to time, which can't help but make everyone have a strange feeling.

The products and production process of our little-known Chenhua Automobile Company don't seem to be much worse than those Mercedes-Benz and BMW?

And this is exactly what Li Zheng and Pan Xiang want them to achieve the most, this plan is a plan made by their boss himself, and this is also a disguised soft advertisement for their Chenhua Automobile before the official opening of the Beijing Auto Show.

To be honest, it's not that Chinese people don't like domestic cars, but in the past few years, everyone has been heartbroken by the so-called domestic cars.

It's just that the old Audi has changed its trademark for a hundred, and changing the trademark in this way is called a domestic behavior, but it makes many people very despised.

After Geely and Chery entered the market, after these two products entered the market, although the price of automobile products dropped a lot, but it also broke the hearts of the Chinese people.

Your price is cheap, but you can't rely on the quality of this product to fool our consumers?

Every day is either to the gas station or to the garage, who can stand it? As a result, the Chinese people's impression of domestic cars has gradually derived two labels, that is, the price is cheap and the quality is poor!

And this is what Li Yifan least wants to see, because first of all, their Chenhua products will definitely not be particularly cheap in price, and secondly, the quality of their products is really not bad.

Therefore, if you want to change the impression of consumers, then you had better start from how to produce, so that consumers themselves can see clearly, what profiles we use, what process...... It is to leave people with the impression that they are the world's top, so as to influence them subconsciously and make them realize that Chenhua's products are not ordinary domestic products! (To be continued......)