After confirming the pledge period of the pledged assets, Minsheng Company is ready to carry out simple renovation of some houses with relatively concentrated locations.

For those creditors who are used by the developer to offset the project payment, they have full freedom to choose the house.

In cities where there is no connection in reality, such choices are more free.

It is difficult to win the whole house, because some houses have been sold more or less in the early stage.

But it is not very difficult to win a house in one of the units, after all, these pledged creditors are relatively familiar, and even most of them have worked on the same construction site and have almost the same dilemma.

A person may only have claims on a few homes, but multiple creditors add up to a different situation and can have more options.

In fact, in the renovation of a house, the biggest expense is labor wages.

For example, to lay a floor tile, not to mention the materials, the labor cost alone will cost dozens of yuan per square meter, and some places are even more expensive than the materials.

Some domestic decoration companies, in order to improve their own construction costs, so they have "formulated" their own construction standards, such as how big the square of the wire should be to adapt to the future development, and how many groups the line needs to be divided into to facilitate future maintenance.

They explain the benefits of this "from the user's point of view", but they don't tell you that doing so will significantly increase the overall price of circuit installation, and especially the circuit installation fee.

In fact, for ordinary users, how can there be so many high-power electrical appliances at home.

Air conditioners, bath bombs and induction cookers in the kitchen are considered powerful appliances, but in addition to the air conditioner in the living room, other electrical appliances do not have such high requirements for wiring.

Moreover, in addition to air conditioning, the working time of other electrical appliances is not long, so those installation schemes that use multiple groups of 4 square lines at every turn have no practical use at all except for increasing the user's decoration costs.

For these houses that Minsheng Company is preparing to use as low-cost rental housing, there is no need to consider the electricity demand in ten years, just a rental house, which can meet the most basic living needs.

Under such a guiding ideology, Wei Minsheng simply issued a task on the special zone platform to let professional personnel carry out the decoration design of these rental houses.

"The circuit is divided into two groups at most, one on the top and one on the bottom."

"What do you mean by a group above and a group below?"

"The above group refers to the area near the roof, through which all the lighting and wall air conditioning sockets are powered.

And the following set is mainly used for sockets in various rooms.

According to the requirements of the platform, in addition to the air conditioning position, these sockets generally only need to meet the needs of electrical appliances below 3000W, and the probability of simultaneous use is not large.

In addition, since there is no air conditioning in the living room, the demand for electricity is further reduced.

I recommend that the main line of the above group of wires choose a 2.5 square copper core wire, which is directly connected to the air conditioning socket in each bedroom.

For the bedroom air conditioner, it is generally one horse, the input power is basically below one kilowatt, even if three air conditioners work at the same time, it will not exceed the long-term load capacity of nearly 30 amperes and six kilowatts of 2.5 square copper core wire.

In addition to this, the wires in the upper group are also responsible for the lighting of the entire house and the use of toilet bath bombs.

Since the current LED lamp power is almost one or twenty watts, and the main light in the living room is only about 100 watts, the requirements for lighting wires are almost negligible.

Use the ordinary wiring method to draw electricity from the main line, and a wire of less than 1 square is sufficient.

Even if all electrical appliances are fully operational, the total load of the above set of wires will not exceed five kilowatts, which is enough to ensure the safety of electricity.

The following group of circuits chooses a 4 square main line, and the line that connects to the socket uses 2.5 square wires.

In this way, even if there is a serious fault such as a short circuit in the electrical appliance behind the socket, the problem can be stopped on the line connected to the socket, reducing the scope of the fault and protecting the safety of the main line.

The main line of 4 square meters, even if high-power electrical appliances such as refrigerators, induction cookers, microwave ovens, electric pressure cookers, and hair dryers run at the same time, it will not affect the line. ”

"For ease of use, it may be necessary to use dual switches in multiple places to meet the needs of lighting control in multiple places."

"You're still learning the same knowledge as before.

The practice of using dual control switches and intermediate switches to achieve multi-point control of one luminaire is outdated.

From the cost point of view, the arrangement of the remote control switch is more flexible and convenient. ”

"But the remote control switch needs a battery, and if it is used for a long time, the cost of the battery is probably not small."

"How much is the battery worth?

If you use your method, the slotting, routing, and wiring between each dual-control switch and the intermediate switch are enough to buy batteries for hundreds of years.

Moreover, this remote control switch only needs to go through a simple code setting, you can realize the control of dozens of switches on the same electrical appliance, and even every button of the car remote control key can realize the switch control of a certain lamp.

For example, a three-bedroom and two-living room house only needs five three-button remote control switch panels to realize the control of the main lights in the living room at the entrance door, living room and three bedrooms.

If you add a three-button remote control switch panel in the living room, you can control the switch of three bedroom lamps and three groups of lights in the living room at the same time.

The functions that can be achieved by the six remote control switch panels are not comparable with the dual control switch and the intermediate switch, at least, the complex wiring is not something that ordinary electricians can do.

Moreover, this remote control switch panel is very lightweight, and it can be directly glued to any place that you think is convenient with double-sided tape, and you don't even need a switch box.

The most important thing is that the price of this switch is not expensive compared to ordinary switches, but its installation time is only one-fifth or even one-tenth of the installation time of ordinary switches.

In today's high labor costs, this saved man-hours is also money, plus the cost of grooving, routing and routing, the overall installation cost is only one-tenth of that of traditional methods.

Moreover, if you use the remote control switch, the troubleshooting is also very simple, it is nothing more than the problem of the control module and the switch, and there will be almost no problems on the line...... Oh, and it doesn't have any wiring at all other than the power supply.

In addition, two of the buttons of the car remote control key can also be set to control the switch of the living room and bedroom lights, as long as the key is in hand, you can turn on the lights at any time, and you don't need to touch the switch everywhere when it is dark at night.

Therefore, I think it has become a trend to use remote control switches instead of ordinary switches, and the overall cost performance is very high, and there is no problem at all for these rental houses. ”