♧ Team leader Assi continued: "Don't look at this punch in is a trivial matter, if you don't play well, it will affect your attendance!" There will be an abnormal clock-in! I have to go to the administrative department to sign a card! It will also affect payroll accounting! Attention to detail is a great benefit to yourself! ”

It is indeed the first time that I Ouyang Facai has used this kind of paper card clock to punch in, and I have understood what I don't understand.

Assi said, "Come, come, come! Listen to what I've said so much, it's better for you to play a dozen practice yourself! ”

I saw that Asi's punching technique was neither light nor heavy, not stopping in the middle, and inserting it into that contact position at one time, I could clearly hear the time content of the card clock printed on the paper card.

I found the paper card with Ouyang Huancai's name written on it, aimed at the card clock punch entrance, and inserted it into the contact position naturally, only to hear a crisp sound, the paper card automatically popped up, I showed it to Axi, Axi smiled and nodded and said, "Yes!" That's it for now! ”

After punching the card, Axi said: "Ouyang Huancai, you follow me, there are still some processes that I haven't explained to you carefully yesterday!" ”

I politely replied to Assi: "Then I would like to thank the team leader for his personal guidance!" ”

Assi didn't say a kind word, and led me straight to the workshop with the pungent Tiannashui water.

After entering the workshop, Assi said: "Let's start with electroplating!" ”

I said, "Yes! ”

Assi began to say: "This plating ......"

When Assi said this, he stopped talking!

I was wondering, Ah Xi put his face on the board, and said in a very hard tone: "Ouyang Huancai, I think you are quite awesome, since you came here yesterday afternoon, Ah Pei and I from the administrative department have already told you five or six processes combined!"

But you think of yourself as high! I didn't even take a note or anything! You Ouyang Huancai is a human brain, not a computer, right? ”

Assi stared at me for three seconds, and seeing that I had nothing to say, he continued:

"A good memory is better than a bad pen! When you go out, you must first have an attitude of being willing to learn with an open mind! Even if you really have a super brain, there are times when you make mistakes and forget! You take a notebook, a draft book or something to write it down, and if you encounter something you don't understand in the future, you turn it out and take a look, and it often becomes clear!

Don't think that such a simple process doesn't need to remember any important points! You are thinking wrong!

The people in the world who can do simple things well are not simple people!

If you really want to make a name for yourself by working outside, you have to do everything you do to the extreme!

By the way, I'll go to the office first to get you two pieces of paper and a pen, you write down the key points of the process I explained today, and after I go back, I will sort out yesterday's, according to the order of Pei and I explained, log back into a book, and hand it over to me after work tomorrow! ”

I, Ouyang Facai, am not a fool! This Assi is in disguise, imparting real skills and real experience to me!

His purposes may be:

One, I really want to train me!

Second, after I learn to be proficient in various processes, I will be appreciated by the factory, and my salary will naturally rise! The status of the work will naturally improve!

Three, Assi is trying to change the way and let me stay in this precision time surface factory for a long time! He ......

While Assi went to the office to get paper and pen, I thought about it, and I still felt that Assi was still good for me as a whole! I have no reason to refuse his reprimand! This is a "benign reprimand"!

It can also be said that Assi is a "part-time job experience talk"! It's something I can't learn from anywhere else!

Uh-huh! Why is Assi so nice to me, a new employee?

When I couldn't figure it out, Assi came back with paper and pen.

Assi handed me the pen and paper, and said in a soothing tone, but still said me in front of the staff next to him, as before! Don't leave me any affection!

Assi took me to the plating process, where two current and voltage controllers were placed, and the two wires of the controllers were connected. Each controller controls the current and voltage inside a non-conductive plastic cuboid drum.

Two metal shelves are placed on the barrel edge of the insulated plastic bucket, which connect the two positive and negative wires of the controller.

On top of one metal shelf hung a long strip of silver, weighing about three or four catties, and on top of the other hung a copper surface to be plated into silver.

After a few minutes, these copper-colored surfaces are turned silvery white by the electrolyte's decomposed silver ion plating, which is lifted by the operator in time (there is a partial weak current, sometimes numb hands). But it won't hurt the human body! ）。

When it is lifted, the operator will shake a few times! This is to shake off the silver ionic water that has been sticking to the surface and the hanger.

Then I will carry the electroplated surface to the bucket next to me to clean! It is rinsed with two clean water in a row.

The inside of these two clear water buckets is to keep the faucet open for a long time during operation, so that the flowing water keeps drifting and maintains the purity of the water quality.

After two streams of water, I carried the hanger, which was full of the finished plating surface, and gently threw it on the mesh plate covered with a thick towel.

The plating surface that is poured on the thick towel is face down and the nail feet are facing up, so you have to use another thick towel to gently cover the reverse side of the surface with foot pegs, and then take a grid plate and gently cover the surface of this thick towel.

Then the operator holds the upper and lower grid plates with both hands, and with a twist of his wrist, the surface is flipped over, and most of the remaining water on it is also absorbed by the thick towel!

This kind of surface needs to be picked up on the grid board and put into the oven for moisture drying before spraying gelatin paint, or light black, or light white, or red and black.

After drying, it is brought out to cool for a period of time before entering the paint booth.

The other electroplating with an electric current is nickel-plated, and the plating is silver-gray or light gray. The rest of the process is the same as the silver coating here.

The nickel used for nickel plating is a hanging cylinder with holes all around it to contain a nickel block cut into small pieces, and after the hanging cylinder is connected to the current, the nickel ions will be separated, and the brass-colored surface will be electroplated with a nickel film in the current and the heated aqueous solution.

Assi explained it one by one, in great detail.

It turned out that I thought that a simple watch, where could I buy 108,000 yuan?

After my own personal experience, I know that this surface from design to cutting to embryo making to glue, to texture, drilling, opening date window, nailing, batch flowers, sweeping sun pattern electric ripples, spray plating, cleaning, baking, painting, diamond loading, light luminous, labeling, labeling, packaging, packing......