What you are afraid of, what will come, the next night, Su Ya and they chatted in the hall, and when Li Zhao was busy drawing, the long-lost assembly of the courtyard began again, and Li Zhao was overwhelmed. But after all, living in a courtyard, how can he avoid vulgarity, so he had to put down his work, stuff everything into the safe, lock it, and carry a stool to the courtyard with everyone for a meeting.

Li Zhao did this to make it clear to these people that he didn't plan to get involved in the things in the courtyard, which was also beneficial, that is, if there was anything in the courtyard, people would not look for him.

After waiting for a while, it was really about Jia Zhang's family, and I heard an uncle introduce: "Recently, it has been rumored that the Jia family is smoking hibiscus cream, this thing is fake, what is going on?" This is to consult our professionals, and we will ask Dr. Wang from our affiliated hospital to introduce us below. ”

At a glance, Li Zhao didn't know this person, but it seemed that this person was quite well-known among the people around him, so he listened to her introduce in detail the role and harm of painkillers. especially emphasized the addictive nature of painkillers and the things that cannot be abused, and finally talked about Jia Zhang's as a negative teaching material, and criticized everyone in the Jia family, after all, they are one of the reasons for Jia Zhang's abuse of painkillers.

And when Dr. Wang introduced that this addiction was likely to relapse due to taking painkillers again, everyone in the Jia family said that they would never buy it for Jia Zhang's family in the future, after all, the consequences that Dr. Wang said were too serious.

After saying this, when Li Zhao thought that the meeting was about to end, Uncle Yi named the stick terrier and praised it for ten minutes, and the corners of Li Zhao's mouth twitched, which directly praised the stick stalk as a moral model. In short, it is how filial the stick terrier is, how to persuade Jia Zhang's to quit, how to go to see Jia Zhang's whenever he has time, encourage her, and praise the stick terrier for his determination to study medicine because of this matter.

Li Zhao listened to it with a wry smile, but if you want to praise it, just praise it, as long as they can be honest, it's best not to look for trouble. The conference lasted for half an hour before it ended, and Li Zhao returned to the house, and he was no longer interested in drawing, after all, he had been painting for a day, so he chatted with everyone.

At this time, Nastya was still a little excited, and said: "Your yard is so interesting, there are all kinds of people, including scientists, journalists, chefs, spies, and addicts..."

The corners of Li Zhao's mouth twitched when he heard it, good guy, spy, are you talking about yourself? Li Zhao is also convinced, this is often IQ not online, and I don't know if he drinks or drinks, Li Zhao doesn't understand it at all.

On Monday, Li Zhao went directly to the material factory to pick up the researchers who wanted to see the installation together, and rushed to the military factory.

After meeting, Li Zhao naturally stepped forward to say hello, and then the team leader asked, "Li Zhao, how sure is it today?" Now many factories are looking forward to new machine tools, do you know how many machine tool applications we have? ”

Li Zhao is also very interested, to know that this is related to the future machine tool market, if there are enough that it can directly bring the machine tool manufacturers flying, Li Zhao also hurriedly asked: "Team leader, how many units are there?" ”

At this time, the team leader said with a smile: "Up to now, there have been no less than 30,000 units of equipment related to this series you designed, and it is estimated that no less than 80,000 units will be reported throughout the year." This does not include the ten machine tool production plants that are ready to be built across the country, this demand will be long-term, and you have to work harder. ”

Li Zhao was also full of confidence at this time, you must know that these equipment have been meticulously crafted by him for many years, and in the process of this design, after some optimization, it can be said that this is the highest level that can be achieved now. And the most important thing is that the machine tools in this trial production exist as the source, so the shots are all eighth-level workers. Li Zhao has also measured these parts, and they are all more accurate than his design requirements.

You must know that the precision of Li Zhao's design can ensure the rapid processing of one micron accuracy, Li Zhao is now looking forward to seeing if it can be done to the level of a few tenths of a micron, if it can, then this machine tool is beyond expectations. At this time, Li Zhao also replied with certainty: "Team leader, don't worry, (this chapter is not finished!) )

Chapter 356: Machine Tools

My design goal is no problem at all, that is, to see if the current machining accuracy can break through my design limit, if so, it will be a surprise. ”

The team leader is also very happy to hear this, after all, this machine tool project, everyone is under great pressure, investment is one thing, after all, it is a large investment of tens of millions, and no one can afford the consequences of failure. It's just that the biggest money-spending project has been successful now, and now look at these follow-up projects, if they can also be successfully completed, he will be relieved. More importantly, there are too many factories that need this project to be successful.

You know, although the relationship with Da Mao has eased a lot, but Da Mao's embargo on important machinery has not been lifted, a few years ago, more than 200 million rubles of machinery and equipment were imported from Da Mao every year, but now there is none. You must know that the machinery of 200 million rubles is the result of repeated cuts I don't know how many times, if it is fully liberalized, it is estimated that it can be reported ten times the demand every year, and more importantly, it has stopped importing for two years now.

In this case, the domestic demand for machinery and equipment is too great, if the trial production is very successful, then it can be guaranteed that all the factories that produce machine tools will not lack orders and can run at full capacity. And the annual demand of each factory will not be less than 200 million rubles, and it is easy for each factory to earn tens of millions.

Soon everyone came to the assembly workshop, and the chief engineer of the military factory took Li Zhao to check all the parts again, and the accuracy of all the parts was as always, exceeding Li Zhao's requirements, and they were all in a similar position. Li Zhao was also overjoyed, and said with satisfaction: "These parts are far beyond my needs, if the installation is optimal, it is likely that the accuracy of the equipment can be adjusted to a few tenths of a micron." ”

At this time, the chief engineer of the military factory said: "I think about the same as you, do you do it yourself or what should I do?" Your assembly level is also very high, and this time the equipment is still designed by you, and it should be better assembled. ”

Li Zhao heard the chief engineer of the military factory say this, and said with a smile: "I definitely want to participate, but one person is short, two people are long, let's directly set up an installation team, let's discuss together." My idea is not necessarily the best, not to mention that you have a master with rich experience in low-temperature installation, and we will discuss it. ”

Soon everyone discussed and formed an installation team, including Li Zhao and the chief engineer of the military factory, and five good hands were found from the installation master of the military factory, and everyone installed it together. The first step is to sort the parts and put them in the environment they need, and then the next few people discuss the installation process.

At this time, Li Zhao gave a lecture and explained in detail the characteristics and installation methods of each component, and the installation of these parts is also exquisite, once the installation is wrong, it is likely that it will not be installed. These people are also modest enough, compared with the drawings, Li Zhao said a detailed record of what Li Zhao said, these will also be their future installation guidance documents, if not in accordance with the requirements, then it is very likely that the future will not be installed.

After waiting for two hours, a few people started to install, in fact, the insulation time can be longer, after all, it is the first equipment, the heat preservation time is longer, and the stress generated in the process of temperature rise and fall can be effectively released.

Everyone cooperated to start the installation, these installation masters are worthy of being good at installation, and Li Zhao cooperated very smoothly, just over three hours, the installation has been completed. Seeing that the installation was completed, the workers who had already been prepared began to transfer, and the installation workshop was definitely not suitable for commissioning.

Soon the equipment was transferred to the production workshop, which had already been prepared on the machine, and at this time, someone also brought food to Li Zhao and others, and Li Zhao handed over the rest of the adjustment work directly to the best eighth-level master in the workshop. Li Zhao quickly finished eating, began to explain the characteristics of the equipment to the master, and then helped to adjust it.

In order to achieve the best results, the calibration is carried out very carefully, so to speak, point by point. For this kind of master, usually a piece of equipment, to his hands, from the beginning of the adjustment are over, that is only a matter of hours, but this one, a full three hours, all places must be optimal, when the machine tool is all ready, it has reached more than four o'clock in the afternoon.

At this time, there is nothing to say, under the guidance of Li Zhao, the test began, the lathe designed by Li Zhao is very different from the original one in the military factory, one is that the accuracy has been improved a lot, and the other is production (this chapter is not finished!). )

Chapter 356: Machine Tools

The speed has increased several times. After listening to Li Zhao's introduction, the master was not ambiguous, and the operation was called a smooth operation, and in just ten minutes, the parts that would have taken several hours to complete the processing had been made.

Chapter 356: Machine Tools