This is a very normal production time, after all, the accuracy was not enough in the past, and it was all hand-polished by the eighth-level master, and when it came to the last step, it could only be polished with silk and the like. If you want to produce a high-precision part, it is often a few hours of non-stop grinding, but now, this machine is not only fast, but also can carry out a micron operation, which is not to reduce the production time by dozens of times?

After taking the parts, Li Zhao began to measure, measuring the length of the micron level, what is needed is a micrometer meter, such as a micrometer can only be estimated to the micron level, which cannot provide an accurate reference for the current production accuracy. Soon Li Zhao finished the measurement, and discussed with the operator, after measurement, Li Zhao found that there was still a little flaw in the equipment adjustment, a very weak flaw, which could only cause a deviation of a few tenths of a micron.

The reason for this error is that the central axis is slightly eccentric, but it is very small. The 30-centimeter-long cylinder used in this inspection has little effect, but if you change it to a part of two or three meters, the result may rise to the micron level. For longer parts, the consequences are even more severe. After listening to Li Zhao's words, the master also measured it, and soon, he got the same result as Li Zhao and adjusted it again.

Then a two-meter-long iron rod is used for processing, and the knife is turned from head to tail, then truncated and measured again. This time, the barrel of a cannon was used, the diameter of which was relatively thick, and the impact on the middle part was relatively small. After measuring, Li Zhao was very satisfied, and handed it to the operator, asking him to measure it too, and got the same result as Li Zhao, and then the chief engineer of the military factory and others also made measurements.

Soon, more and more people were happy, and finally everyone looked at Li Zhao, including the team leader, and after a day of assembly and testing, the project was considered a success. Under the gaze of everyone, Li Zhao announced loudly: "I announce that our machine tool series, lathe project, has met the design requirements, and our project has been successful." ”

At this time, everyone made a deafening cheer, which means that the entire machine tool industry has opened a new chapter. In the future, in addition to numerical control, ordinary machine tools only need to carry out the corresponding special design, and it is very difficult to further improve the accuracy.

At this time, the team leader pulled Li Zhao and said, "Let's go together to report the good news to the superiors." Then he pulled Li Zhao and the director of the military factory together, walked to the director's office, and soon saw the team leader began to keep saying, call me a certain leader, and in a short time, the news of the successful development of a new high-precision machine tool spread all over the capital.

After the report was completed, the team leader said: "Now that the lathe has been successful, then there should be no problem with other such as milling machines and planers, right?" What are your plans regarding production? I'd like to hear your opinion. ”

Li Zhao saw the team leader ask, and said: "This mainly depends on the leader's arrangement, you must be more comprehensive than us, and the most important thing now is to expand the scale of production, so as to form a scale advantage is the most important." ”

What did Li Zhao say about this? He hopes to be able to equip the material factory and the rolling mill as soon as possible, after all, he is going to get a vehicle later, and he needs a new machine tool to complete the production of the main parts. If you don't need a new machine tool and want to achieve the accuracy of each part, you need too many high-level technicians.

You must know that the equipment that Li Zhao is now making is to let intermediate technicians also give full play to the strength of senior technicians and even top technicians, for the improvement of production efficiency, it is definitely not a star and a half, it can be said that it has been improved dozens of times, of course, the impact on ordinary parts is not large, and for high-precision parts, the impact is great. For example, the engines produced by military factories can only produce 10 units a month, but now they can produce hundreds of units.

That's the power of high-performance equipment, the parts that used to take hours to polish by hand may now only take a few tenths of the original, which is a huge improvement and the meaning of the equipment.

Seeing Li Zhao say this, the team leader was relieved, he was also afraid that Li Zhao directly proposed to equip the material factory or rolling mill first, and now the first thing that needs to be replaced is the military factory, after all, the strength of the military factory is the strongest now, and it can also form an advantage the fastest.

At this time, the team leader continued: "Okay, in this case, I will arrange according to the plan, the first thing is to let the military factory be formed (this chapter is not finished!). )

Chapter 357: It's Done

Scale, followed by machine tool factories, material factories and rolling mills can only be placed in the third. After all, these two factories are currently the two strongest factories in the capital, and they can only quickly expand their scale when they are equipped first. ”

Back in the workshop, the parts have begun to be processed here, surrounded by onlookers, this equipment is too shocking, has subverted these people's perception of the equipment, it is really too big for them. They are still using equipment with a processing accuracy of a few wires to dozens of wires, and now suddenly a machine with a processing accuracy of one-tenth of a wire suddenly comes, how can they not be shocked? This is directly the span of decades.

This time a grand celebration banquet was held, and the success of this lathe has represented the success of this major project, which can be regarded as an end. The rest of the machine tools don't need Li Zhao to worry about anymore, he just needs to wait for the equipment and workers to arrive, after all, with this experience, the rest is not a problem, because the core idea is the same, Li Zhao also elaborated on the core idea of installation.

Early the next morning, Li Zhao first went to report the good news to Su's father, met Li Zhao and said: "Dad, the machine tool project completed the installation of the first lathe yesterday, and the design requirements were fully met after testing, and in terms of accuracy, as long as the machining accuracy of the parts is high enough, it can be slightly exceeded, and the whole project is a complete success." ”

Father Su was also very happy when he heard it, and said, "When will our factory be equipped, have you asked?" ”

Li Zhao smiled: "I asked, it is estimated that it will be June at the earliest, and it may be July if it is late." Now the production speed is still very slow, first of all, it is still necessary to equip military factories and machine tool factories, these two factories are now the two strongest machining strength of the two factories, only to equip them first, in order to form the scale as soon as possible. ”

Father Su heard this, thought for a while and asked: "Do you think it is necessary for us to equip a batch of poor machine tools to form a high and low match with the new machine tools?" If it's July, it's a bit too long to wait, it's better to get some equipment to train employees, do you think it's operable? ”

Li Zhao thought for a while and said, "Yes, yes, but you don't need to buy too much, and when will our new dormitory building be built?" If you buy equipment, if the employees who will be transferred to us want to come over, don't you have nowhere to live? ”

Father Su smiled: "You can rest assured about this, the second batch of dormitory buildings will be completed in mid to late June." Now there is a tower crane to cooperate, as long as the concrete strength is enough, the construction of the next floor can be carried out, our dormitory is only six floors, much faster than the residential building, the second batch will be completed eight buildings, and the research institute is the same specifications. ”

When Li Zhao heard this, he was relieved, these eight buildings were completed, and there was no problem with the basic arrangement of employees. After thinking about it, Li Zhao asked, "Then how many rooms are these buildings going to be arranged?" This time, it is estimated that the families of the soldiers will live in the most, and if they are all made into a two-person room, they will not be able to live so many people. ”

Li Zhao's worries are not superfluous, although there is no complete count of how many people will come, but the final number, according to Li Zhao's estimates, may be 3,000 to 5,000 people, if more, there may be 6 or 7,000 people. For these eight dormitories, if there were only two people living in each room, then at least three or four thousand rooms might be needed, but now there are only fifty-six rooms in each building, and one building can only accommodate more than 4,000 people, which is probably not enough.

At this time, Father Su smiled and said: "How can only two people be arranged, this time six to eight people will be arranged in each room, try to arrange the room according to the family model, and try to arrange only one or two families in a dormitory." Of course, if there are few people coming, there will be multiple family arrangements together, Lao Zhang has made a promise, and we have to accept it with tears. ”

Li Zhao also nodded yes, now he can only hope that the instant noodles will sell well, so that he can arrange as many people as possible. Although the instant noodle factory can't arrange so many people, the ceramic factory can arrange it, and the grouting method is faster, but at most it is only about 300, which is still assisted by machinery and equipment.

The entire production process requires too much labor, and it is estimated that 1,800 people are enough at the beginning, but as long as the sales volume of instant noodles can rise, it will not be a problem, and there is also an electrical project of a rolling mill waiting for it. In addition, of course, you can also produce all kinds of porcelain, anyway, you are idle and idle, and you can add some items.

Thinking about it, Li Zhao also sighed and said: "Now we are still just starting out, it is too difficult to arrange people, and now we can hope that instant noodles will sell well (this chapter is not finished!)" )

Chapter 357: It's Done

By the way, do you have any ideas on how to sell instant noodles? I think so, send a batch to our brother companies with better relations, and let them send them to employees as benefits. This time, we will directly send tens of thousands of yuan, and strive to open up the influence at once. ”

Chapter 357: It's Done