1:30

More than 700 installation masters are ready to go at the first phase of the project, and everyone's face is full of excitement!

Well done, you can definitely have a fat year at the end of this year.

After Wei Zhijie and Chen Weikang said some opening remarks, the team dispersed and headed to the floor they were responsible for.

Of the products transported this time, the 60-square-meter small apartment occupies nearly half.

This 60-square-meter small apartment is two bedrooms and one living room, one kitchen and one bathroom, and the home products are a total of 30 projection areas.

The household products involved are: shoe cabinets, TV cabinets, cabinets, wine cabinets, master and secondary bedroom wardrobes, bathroom cabinets and balcony cabinets.

Because the house type is somewhat small, the specifications of the product are also more exquisite, and the functional area is relatively compact.

The 60-square-meter small apartment is a two-ladder and eight-household layout.

The 1st and 2nd floors are shops along the street, and the 3rd floor up to the 22nd floor are all small apartments.

In Room 2201, Unit 1, Building 8, the second team, Ling Haifu, wearing a blue and white installation uniform, is arranging work.

The second team had a total of 8 people, including him, and this time he called an extra relative.

Although there will be less money in the end, there will be less of it, but one more person has more strength, and everyone works harder, maybe they can install more and make more money.

Although the total amount of installation allocated is fixed, which team finishes the installation first will be deployed to the unfinished team and participate in the unfinished part.

After the team stood up, Ling Haifu began to arrange the work.

"Next, I arrange work, this morning, we have studied the No. 01 house type, and we have also seen various product drawings, and now it is time to make money, and everyone is cheering up."

"Okay, Brother Haifu." The youngest lad in the line chimed in.

Ling Haifu nodded and continued: "Just like the way simulated in the morning, the third aunt and Minggu are responsible for unpacking, you use a blade to cut the sealing glue, collect the corner protectors and bubble wrap inside, and then take out all the plates inside and stand in the corner of the wall where the product is installed. ”

"Okay, Haifu." In the line, two young women in their thirties nodded in response.

"Third Uncle and Haiqing, the two of you are responsible for screwing the two-in-one, after screwing the plate in one place, go to the next place, the whole room is screwed, and then you make the hinges of the door panel, if the door panel is also screwed, you go down to the next layer and repeat the above steps."

"Hmm."

"Okay, Brother Haifu."

The youngest young man is named Ling Haiqing, Ling Haifu's nephew, and he is only 17 years old this year.

"Haiqing and Haitian are responsible for assembling the cabinet, and Zhijian and I complete the last step, assemble the cabinet, and then open the door panel."

"Everyone understands, if you don't understand, we learn by doing."

"Alright, everybody, get moving."

With Ling Haifu's order, all 8 people moved, because it was the first set of houses, and the packages were not opened, so everyone took the blades to help unpack.

The products are product bags and hardware bags.

The first target of the two young women was the shoe closet.

The shoe cabinet is not big, and there are 6 bags all down.

Take the blade and make a stroke on both sides of the package, and then a stroke in the middle, and the package will be opened.

Because the bottom cabinet of the shoe cabinet is 2400mm high, the first package contains 2 left and right panels and 2 middle vertical panels.

The top and bottom plates, fixed shelves and movable shelves are in the other 2 packages.

Because the two-in-one link is to be screwed on the side panel, the two people give priority to opening the side panel bag.

As a rule of thumb, side panels over 1200mm are not placed on the wall, but are placed directly on the floor.

Then start to unpack the short bag, and the plates inside the short bag do not need to be screwed with hardware.

After unpacking, the panels are erected on the surrounding walls so that the masters can find the parts when assembling.

After everyone finished unpacking together, the two young women took two blades and went downstairs.

According to the previous arrangement, each team is responsible for one house type.

Ling Haifu's second squad was in charge of Unit 01, so the two young women went to Room 2101.

After the package was unpacked, the third uncle and Haiqing began to twist the two-in-one on the side panel.

Two-in-one is one of the hardware used for structural linking of household products.

It is screwed into a 10mm diameter hole on the side plate, after placing the connecting rod with expanded rubber particles into the hole, the connecting rod is locked with a hand drill, and the thread of the connecting rod is tapped, and the expansion rubber particles at the bottom are blown open, so as to achieve the purpose of locking.

The front and rear of each transverse plate need a connecting rod to be linked to the side plates.

If there is no fixed shelf, an ordinary cabinet is that the position of the top plate and the bottom plate need to be screwed in two.

4 pieces are screwed on the left plate, and 4 pieces are screwed on the right plate.

Because of the beginning, the remaining 6 people in the room all twisted the two in one together.

After screwing a few products, Haiqing and Haitian, who were in charge of assembling the cabinets, began to assemble the cabinets.

Assembling the cabinet is as simple as placing the side panels on the floor with the side side facing up with the connecting rod facing up.

Then put the top and bottom plates into the holes, and then place a gradually tightening flatbread accessory in the 15mm hole of the transverse plate, and use a hand drill to twist about 90 degrees clockwise.

You can link the top and bottom panels with the side panels.

Then, the two of them held the backplate together and inserted it along the backplate slots of the top and bottom plates.

If there is a fixed shelf, install the fixed shelf first and then place the backplate.

Finally, the side panel on the other side is covered and linked to the top and bottom panels to become a cabinet.

Between the backplate and the fixed shelf, there is no hurry to link it with tapping screws.

When all the cabinets are assembled, they are leveled with a level, and then linked, and the whole cabinet will be very stable.

After unpacking, twisting the two-in-one, and assembling the cabinet, it is the masters who assemble the cabinet.

Then hit the level and fix the backplate and the shelf between it.

This is followed by the installation of functional parts and accessories in the cabinet.

Functional parts are divided into wooden functional parts and metal functional parts.

Wooden functional parts include: drawers, wine racks, trouser racks, etc.

There are many categories of metal functional parts, and there are baskets, pendants, metal drawers and so on on the cabinets.

On the wardrobe, there will also be pull-out baskets with various functions, such as rotating shoe racks, tie racks, storage baskets, etc.

There are a variety of accessories, such as clothes rods, aluminum alloy shelves, side panels or shelves lights, etc.

These hardware and accessories require a lot of installation experience in order to install well.

This is also one of the differences between an installer master and an apprentice.

In home installation, the installation of the cabinet is the easiest, as long as you learn to read the drawings and know how to find the board to assemble into a cabinet.

Next, you just need to learn to use a spirit level, level the cabinet, and then link several cabinets.

From a novice to being able to assemble the cabinet smoothly, it is estimated that it only takes three days before and after a product.

The installation of hardware takes a long time to precipitate.

The standard of the teacher is to be able to independently complete the installation of 26 categories of the whole house.

It generally takes 1 year to learn quickly, and 2 years for slow learning, and the key is whether you have the opportunity to practice.

"Brother Haifu, the cabinet of the shoe cabinet has been installed."

When Ling Haifu installed the door hinges of the door panel in the bedroom, Ling Haiqing and Ling Haitian assembled the cabinet of the shoe cabinet.

Unlike other enterprises that use standard cabinets to combine, Hutao Group has been a combination cabinet at the beginning.

A 1800mm wide shoe cabinet is divided into 3 sections, so there are two fast and middle vertical panels in the middle of the whole cabinet to divide 3 back panels.

When installing, it is indeed more difficult, and it needs to be installed on the side, and when the installation is over, several people need to be lifted together.

Hearing that Ling Haiqing and Ling Haitian had completed the installation of the cabinet, Ling Haifu and Huang Zhijian walked out of the master and second bedrooms respectively.

Set up the shoe cabinet with them, although the shoe cabinet is not big, two people can do it, but it is safer for 4 people to carry it together.

"You guys go install the wine cooler."

Ling Haifu instructed, and Huang Zhijian pushed the cabinet to the wall of the shoe cabinet, not against the wall first.

After taking out the level, the two began to cooperate and shoot the cabinet right!

Because the floor is not necessarily horizontal, the cabinet must be vertically found with a level, otherwise the door panel will be crooked when installed.

After finding the vertical, Huang Zhijian took the 15mm self-tapping screws and began to link the backplane with the fixed shelf.

The hole in the back plate is opened in the factory, and the master only needs to place the self-tapping wire into the hole and tighten it with a hand drill.

If the drawing is trouble-free and the backplate does not lead the hole, the installer needs to measure the height of the laminate in front, and then draw the line behind the backplate and then play self-tapping.

If you miscalculate, or misread, you run the risk of screwing through the front.

When you encounter a competitive owner, he will ask you to change the backboard, and the trouble is not a star.

So! Even if the production is troublesome, the hole must be opened in the factory.

After screwing the back plate to the shelf, the cabinet is very stable.

Push the cabinet against the wall.

The two began to install the drawers and doors, and then installed the top seal between the cabinet and the ceiling.

A shoe cabinet product is installed.

The handle is not in a hurry to install, and then it will be installed uniformly at the end.

Ling Haifu and Huang Zhijian cooperated to complete the installation of the shoe cabinet during this time.

Ling Haiqing and Ling Haitian have already installed the cabinet of the wine cabinet.

Because the wine cabinet is made up of four combination cabinets, each of which is relatively light, the two of them can stand it up.

After the cabinets of the wine cabinet were assembled, they continued to assemble the cabinets of the cabinets.

Compared with leveling, assembling parts, and installing door panels, the speed of assembling cabinets is much faster.

Often the masters make a good product, and they can already assemble the cabinet of 2 products.

When the time comes to 15:00.

The third aunt and Minggu appeared in the 2201 house again.

The two of them were in charge of unpacking, not all the way down, but when they reached the fifth set, they returned.

According to the installation schedule, 2 sets of the whole house can be completed this afternoon, and 1 set will be completed overtime in the evening, and it will be successfully completed today.

Two more sets are dismantled for easy installation tomorrow morning.

After the two of them finished unpacking, they returned to room 2201 and began to sort out the logistics and hygiene.

First of all, the paper of the packaging should be sorted and collected, and the corner protector and bubble wrap should be put into a packaging bag separately.

The paper skin needs to be recycled and sold, while the corner protectors and bubble wrap can be reused, and after a certain amount is collected, the team will bring it back to the Hutao Industrial Park.

Next, the installed cabinet is initially cleaned to clean the area.

If the installation in the room can't keep up with their progress, they can go to the apartment below to sort out and collect the paper first.

Then the third uncle and Ling Haiqing only need to play the two-in-one of the four households below, and then return to room 2201 from below, and the two of them will install the handle.

Because the handle hole in the door panel has been opened by the factory, they only need to tighten the handle nut against the hole.

The process doesn't require much technical content.

If they finished everything at hand, the two of them could first go to Room 1901 to assemble the cabinet, and finally meet Ling Haiqing and Ling Haitian.

When the cabinets are all assembled, they will return to Ling Haifu and Huang Zhijian.

Ling Haifu and Huang Zhijian are both masters, and each of them can continue to install products with 2 installation apprentices.

Generally, when a master master leads many small workers, they will develop their ability to install hardware.

For example, a small worker specializes in installing drawers, a small worker specializes in installing pull baskets, and a small worker is ready to install miscellaneous parts, such as clothes rods, pendants, hooks, shelves, etc.

With the addition of four people, Ling Haifu's second squad began to soar in installation speed.

16:10

After the installation of the first 60-square-meter small apartment, the third aunt and Minggu packed up the paper and miscellaneous items of the five households below, and returned to room 2201 to complete the final cleaning work.

Since the installation has been completed, they are doing a fine cleaning this time, and they are cleaning according to the delivered standards.

The second installation team started at 13:40 and finished the first house at 16:10.

The process took 2 and a half hours. Get rid of the time when everyone unpacks together and twists the two-in-one together.

The speed of the second squad is 2 hours a full room.

This speed is relatively fast, and the main reason is that the products of small houses, in addition to the accessories that are difficult to install in the cabinets with pull baskets.

The others are simpler, i.e. there are no lights and no accessories that are difficult to install.

At most, it is a drawer and some basic functional hardware, such as a clothes rod, a lattice rack, a trouser rack, etc.

Moreover, Ling Haifu's second squad has 2 master masters and 2 apprentices with one-year installation experience, and only the third uncle and Ling Haiqing are novices.

For other teams, it is expected that a whole room can be completed in 3 hours.

Revenue-wise, at this pace.

Installation starts at 8:30 a.m. and returns at 11:30 a.m.,

Installation starts at 13:30 p.m. and returns at 17:30 p.m.,

The installation starts at 18:30 and returns at 21:00.

Ling Haifu's second squad can install 5 sets of whole houses.

The small apartment is 30 projections.

There are 150 projections for 5 sets, and the installation fee for each projection is 48 yuan.

They can earn every day: 150 projections * 48 yuan = 7200 yuan.

According to the rules, Ling Haifu and Huang Zhijian shared 60% of the profits.

7200×0.6=4320 yuan.

Each person can get 2,160 yuan, and if they work 28 days a month, their master's income is 60,480 yuan.

The remaining 2,880 yuan, 6 small work points, each person can get 480 yuan.

If you work for 28 days, you can get 13,440 yuan a month.

Compared with the salary of more than 2,000 yuan a month in Gui Province, 13,440 yuan is simply unimaginable.

Of course, this is Ling Haifu's second squad.

After all, Ling Haifu is a master who has been installed for nearly ten years, and their efficiency is indeed one level higher than that of others.

If you can complete 4 sets of whole houses per day, there is also an installation fee of 5760 yuan.

Subtracting the 3,456 yuan taken by the master, there is also 2,304 yuan, and there are about 380 yuan for 6 people.

More than 10,000 yuan in a month.

On the 25th, 100 installation teams completed a total of 438 complete houses.

All teams basically return to the quartermaster warehouse after 21:00.

The canteen is ready for supper for the return of the installers.

After the number was counted, Chen Weikang reported to Wei Zhijie, who had arrived in Haishi, as soon as possible.

Wei Zhijie also sent news to Zhang Mingyu and Wu Jianguo.

Wu Jianguo was very excited and told Wei Zhijie that he would lead the team over tomorrow afternoon to see the effect after installation.

Wei Zhijie expressed his apologies because he had plans in Haishi all day on the 26th, and told Zhao Jingwen to follow up on the follow-up matters.

Zhao Jingwen nodded in understanding.

The installation on the 25th was successfully completed.

It is worth mentioning that the hardware bags of household products are not unloaded in each room at the beginning.

Instead, it is placed in several rooms of the project site, which are directly occupied by the warehouse keeper and managed in a unified manner.

Each team can come and pick up as many packages as they need every day, or upload the demand every day and have a full-time hardware distributor help deliver it.

If you put all the hardware bags into the room at the beginning!

Hey! You know!

Day 2! Someone's pockets are definitely going to be bummered.