PS: New book for newcomers! Ask for a referral ticket! Ask for a commuter pass! Thank you all for your support

"Sir, the long sword you want to produce has been rolled off the production line."

Bai Lian happily ran to the side of the industrial machine tool and carefully took out a metal strip more than one meter long and put it on the workbench.

Bai Lian excitedly attached the refined copper equipment that had been prepared long ago to the hilt of the sword. A longsword that reflects the light is complete! Excitedly swinging his long sword, and then settling in various poses. If you had this sword in an hour, no plant would be taller than half a meter!

After about ten minutes of excitement, the novelty slowly faded. The CNC machine is really a good thing, and it only took less than ten minutes to cut and polish the metal strength 140 high manganese alloy steel! 3D metal printers are also, refined copper also has more than 40 metal strength, said hollow hollow, said carved carving. It's a pity that neither of these two is a domestic device.

Do you want to optimize industrial machines?

"Tai'a" collects the information of domestic industrial CNC machine tools, as well as market reports!"

"Sir, it will take about two minutes."

Bai Lian flipped through the information compiled by "Tai'a", and almost all of the cutting-edge CNC machine tools were controlled by foreign countries, especially the high-precision multi-axis linkage machine tools, which were also the "big killers" of military manufacturing, which completely restricted exports.

There are very few high-end machine tools in China, and most of the low-end machine tools are semi-automatic, and most of the production is copper, iron, aluminum, stainless steel and other low-hardness metals.

Then Bai Lian noticed that the control system of industrial machine tools had the same shortcomings as the operating system of lithography machines. The "accuracy" is too poor! Mismatch with hardware, resulting in higher precision parts that could have been produced but not manufactured, and even because of the operating system, occasionally cause the machine tool head to break, Bai Lian found a broken tool head to hurt the operator's news.

"Taia: If you were asked to optimize the original operating system of this industrial machine tool, would you be able to do it?"

"Sir, it will take about 24 hours, do you need to optimize?"

"Give it a try, I want to see how good your programming logic skills are." Bai Lian was still a little curious about this.

Bai Lian continued to open the design of industrial machine tools, some public design drawings, as well as design concepts and conjectures.

"System, how much bioenergy is needed to optimize an industrial CNC machine?"

"The master needs 100,000 bioenergy points to optimize industrial CNC machines. You are temporarily unable to pay. ”

100,000, so much, it seems that if you want to optimize CNC machine tools, you have to separate their parts. Do you want to dismantle, a more than 200 million, a bit too luxurious, or to buy some high-end parts design drawings, after optimization, it should also be able to reach the world's top level, right? Probably, if there are no material restrictions.

"Taia: If you were asked to develop a completely new alloy material, would you be able to do it?"

"Sir, the computing power is insufficient, and the time is unpredictable. I'm so sorry. ”

Bai Lian touched his nose; "In other words, if the computing power is sufficient, then it is still possible?"

"Sir, according to the chemical interpretation, molecules and atoms are the main body of matter, and it is possible to calculate new molecules and new structures of atoms after a large number of experiments. Then this is a new material. ”

"Okay, okay, I'm going to study chemistry tonight!" Taia: "How much do you know about quantum computers?" Bai Lian thought of last year's latest quantum computer, Zu Chongzhi No. 2, and it is said that the computing speed is hundreds of billions of times that of supercomputing!

"Sir, if there are hardware materials, I can design and produce qubits within 50, but I can't solve quantum entanglement and quantum loss, and quantum computers can't be practical for the time being."

Bai Lian barely understood the state of the quantum computer that "Tai'a" said, which already involved his knowledge blind spots. You still have to continue to study, otherwise you won't be able to use the golden finger!

The next day, when Bai Lian was teaching himself about chemistry, "Tai'a" told him that the operating system of the CNC machine tool had been optimized. After optimization, the results of the industrial system show that the accuracy is increased by 20%-35%, the work efficiency is increased by 8%-12%, and the energy consumption is reduced by 3%-8%.

The optimized CNC machine can process nanoscale parts! However, the tool is not hard enough to produce alloy materials with a hardness of more than 120.

"Tai'a" sent the technical information to Mr. Chen, telling him that we can customize the operating system of industrial CNC machine tools, and by the way, send him a copy of the market report.

Chen Qingyuan took a cursory look at the information, and he couldn't understand a lot, only looking at the comparison and market value report after optimizing the system, he also knew that the boss had made another product that laid golden eggs.

"Is there anything that needs to be kept secret about this information?" Chen Qingyuan has been able to skillfully use artificial intelligence to assist his work.

"Mr. Chen, these are all public information, I just sorted it out, and I don't need to keep it confidential." Too a neutral voice sounded in the headphones.

"Mr. Chen, are you looking for us?" Chen Shaomo, the head of the business department, and Li Qingya, the marketing department, pushed the door in. They've been a little too busy lately, and they often work overtime until 7.8 o'clock.

"Look at this, the boss just sent it to me." The biggest benefit of smart glasses is convenience.

For the two departments, they are very sensitive to the market value report, and the two subconsciously calculate the value of the customized industrial CNC system, if the single fee is charged, a foreign standard high-end machine tool is about 50 million. The mid-end machine tool is 4 million, and the low-end machine tool does not need such excellent CNC software.

How many machine tools in China need this CNC system? I don't know! But there must be a lot, CNC machine tools in the domestic market value of hundreds of billions, CNC systems account for 1/4, not too much, right?

"Mr. Chen, this?" The two of them were already shocked and a little speechless.

"You study the market value of the product and set a quotation plan as soon as possible."

……

The company's affairs were arranged by Chen Qingyuan, and Bai Lian built a "toy" with the assistance of "Tai'a". A toy that makes the gummy guy drool.

"Assembled Metal Model-Gundam"

Bai Lian is completely in the same scale with a 3D printer to make the "Assault Freedom" with 12 tubes floating cannon version!

I couldn't afford it before, but now I make it myself!

Bai Lian remembered that this was his previous dream, wanting to have a "Gundam" of his own!

"How about we make a Gundam?" Bai Lian's eyes were shining, he really wanted to build a mecha of his own!

"Sir, your will is all I have!"

"Hahaha, I'll update the emotional simulation program for you at night, otherwise your speech will be too monotonous."

"Taiah, you say, with your current knowledge reserves, all the functions that can realize the mecha in the anime?"

"Sir, I can't make such a flexible mechanical limb for the time being. Laser weapons, ion thrusters, anti-neutron engines, ionizers cannot be studied. ”

"It's about starting from scratch, hahaha. I've decided, I'm going to build a Gundam! Start with the robotic arm! That's my dream from now on! ”

Bai Lian smiled like a two-hundred-pound child.