"We have to develop our own smart set-top box."

Shin'ichi Izuto, who felt that it was a terrible crisis hidden under the deep water, said resolutely.

Of course, at this time, Lin Xuan didn't know what happened at the headquarters of the island country Suo Ni Company.

At this time, he was concentrating on the etching machine and preparing for the official test of the lithography machine in two days!

……

14 March 2005.

There is only one day left until the official testing of the lithography machine.

Today, almost all news media have begun to cut back on other aspects of the report, and instead focus the news on Hantang Technology on Lin Xuan.

At the same time, various Internet "experts" do not seem to stop.

Seeing that Lin Xuan could finally be discredited, he also spoke out one after another to discuss whether Lin Xuan could do this.

At this time, in a famous variety show on Bay Island, Chen Damou, a TSMC store at this time, was answering the hostess's opinion:

"I think it is absolutely impossible for Lin Xuan to do this, it is absolutely impossible to succeed at one time, of course, I think with the strength of 5 academicians and Lin Xuan's super brain.

The lithography machine may be made in half a year, but this time it will definitely face the failure of the test machine, and it is impossible to develop it successfully at one time!

So I suggest that you don't have too many expectations, after all, if the lithography machine is really so good, it will not be like the current lithography machine can only be manufactured by a few countries.

It will not be like now, there are only two or three manufacturers that can manufacture advanced lithography machines. ”

"I see, it turns out that Mr. TSMC is not optimistic about Lin Xuan's ability to break through the 45nm process process."

The moderator nodded, then asked:

"Then when does Mr. Chen Damou think Hantang Technology will be able to overcome the 45nm process technology?"

"My opinion is that you don't have to think about it in 3 years!"

Chen Damou said his opinion seriously, only to see him slowly express his opinion:

"The 45nm process technology is the world's most advanced process technology, and the world has invested tens of billions of dollars in the research and development of the 45nm process technology!

At this time, the situation of Hantang Technology, there is no need to think about being able to conquer the lithography machine for half a year, and there is no more than three or four years, they don't need to think about winning the 45nm process process!

The reason why it is said that it will take three or four years to complete it is still considering that they have dispatched 5 academicians and such a huge scientific research force.

If it is just Hantang Technology alone, I am afraid that it will not be able to be done in ten or twenty years! ”

Hearing Chen Damou's words, the hostess at the scene, including the audience, nodded one after another, and at the same time, the audience in the Bay Island area in front of the TV also nodded.

The Bay Island region has developed science and technology and a prosperous economy, which can be said to be the current Asian Tigers, and the people here are not optimistic that Lin Xuan can overcome the 45nm process technology.

Listening to Chen Damou's words at this time, they seemed to have found a psychological pillar, and they nodded in agreement with Chen Damou's words.

Because they really don't want to admit the fact that the Great Xia side will surpass them, if that happens, then their self-esteem will be hit.

And their mentality is not only now, but even in the future, after all, they were indeed more advanced in technology than in Daxia at some point......

Therefore, Chen Damou's words at this time are in line with their psychological expectations.

At this time, the hostess did not stop her words, only to see her pause slightly and then asked slowly:

"Can you ask Mr. Chen Damou? What is the current yield rate of TSMC's 45nm process technology? Have we mastered the mass production technology of 45nm chips? ”

Hearing the hostess's question, the corners of Chen Damou's mouth hooked up with a confident smile and said with a smile:

"Thanks to the strong sponsorship and orders of many international giants such as Moto Luola Company and Lianwuke, as well as Sike Company.

The yield rate of our 45nm process has reached 60%, and this yield rate is still advancing rapidly.

Small kiosk app

According to this progress, we have reason to believe that we can make our yield rate reach 90% before the Mid-Autumn Festival and reach more than 95% by the end of the year! ”

When the people at the scene heard Chen Damou's words, they instantly became in an uproar and glanced at each other with excitement in their eyes.

The hostess's face was also a little excited, and she sighed proudly:

"It seems that our Bay Island area is the first region in the world to master the mass production of 45nm process technology!"

At the same time, it was not only the hostess who was proud, but also many viewers at the scene, including the Bay Island audience in front of the TV, who were also smiling proudly......

……

The TV program on the side of Wandao was talking about the 45nm process, and when it came to Lin Xuan, Daxia did not stop.

At this time, in a certain Hunan Satellite TV, Wang Shining, the new head of Zhongxin International, also slowly said that he was not optimistic about Lin Xuan.

At this time, he was trying his best to belittle Lin Xuan, Hantang Technology, and Professor Chen, the head of Qian Zhongxin International.

Wang Shining, one of the many talents who followed Professor Chen from TSMC to establish Zhongxin International, and at this time, with Professor Yang, they left with the core backbone.

Zhongxin International naturally can only pull out the general with a short man and let Wang Shining come to power.

Wang Shining was originally just a sales department manager, but at this time, with Professor Chen, they left with core talents.

Because he refused to leave, he was appreciated by many shareholders in the case of a short general, so he naturally took over the CEO position of Professor Chen.

“…… Lin Xuan is a guy who likes to brag, you look at his bragging in the industry summit, which one did he achieve?

What "triple play" did he propose include "Industry 4.0", and did he make anything by himself?

No!

Therefore, Lin Xuan likes to brag, and Lin Xuan will definitely fail this time. ”

At this time, Wang Shining talked eloquently about his opinions, with hatred in his eyes.

Completely forgot what Lin Xuan paid when Lin Xuan upgraded the 45nm process technology for Zhongxin International? In the end, what did Zhongxin International get?

The so-called immature white-eyed wolf may be like this!

Of course, it is not surprising that Zhongxin International, which has more than 80% of the shares held by overseas shareholders.

No wonder Zhongxin International in the previous life couldn't get up, it's really sad and sighing.

……

Time passes slowly.

Yesterday's remarks by major experts in the field of electronic semiconductors and even presidents of well-known enterprises caused a lot of discussion and uproar in the Great Xia.

But these hustle and bustle and discussions did not affect the nearly 2,000 reporters waiting for the latest news at the Hantang Semiconductor headquarters in Wuxi City at this time.

That's right, the 45nm EUV lithography machine is not assembled at the Xia Ke Institute, after all, the lithography machine is made for use.

The purpose of its manufacturing is not to design it and display it, and then let the above accept the results, so that the research and development is completed.

The purpose of lithography machine manufacturing is to produce chips, so it is impossible to complete the post-assembly verification test at the lower academy.

Then I went all the way to bring this lithography machine back to Hantang Technology, which wasted too much time.

Moreover, the lithography machine is an ultra-precision component after all, and it cannot withstand the bumpy handling of the road.

So at this time, the reporters who knew where the lithography machine was surrounded the door of Hantang Semiconductor, but at this time, Lin Xuan, including the core executives, did not come out.

Hantang Semiconductor is its own company, not Xia Keyuan, so this time, even if there are many reporters waiting anxiously in front of the gate.

But Lin Xuan only arranged for people to bring them fast food and tea, and the rest was gone.

No matter how much they called, Lin Xuan didn't come out to answer anything, but waited for the lithography machine test while completing his work in full swing.

In this way, time passed slowly, and after the official ribbon-cutting was announced at 9 o'clock in the morning, Hantang Semiconductor fell into a busy situation.

At this time, in addition to the 2,000 reporters at the gate of Hantang Semiconductor, many management leaders such as the president and vice president of the Summer Academy of Sciences also took time out of their busy schedules to come to Hantang Semiconductor to prepare for the on-the-spot acceptance of the results.

Lin Xuan also readily agreed, anyway, there are not many more people, since they want to see it, then show them.

"Li Zheng, do you think you can succeed?"

At this time, at the back of the reporter group, some people who were also anxious were also anxiously waiting for the latest news.

The lithography machine is related to the future of Daxia Semiconductor, and it is the most difficult thing in the 45nm process process.

If the lithography machine can be successfully solved this time, it means that the progress of the 45nm process process has suddenly been reduced to 40%.

Therefore, at this time, in front of the gate of Hantang Technology, there are also many people waiting for the latest news at the scene.

In addition, in the Internet and even in the streets and alleys, many people are also anxiously waiting for the news from Hantang Technology.

Can the lithography machine succeed, is it a failure or a success...... They were also anxiously waiting when they were nervous.

In this way, time passed bit by bit, and people became more and more anxious as time passed.

At this time, as the time approached noon, many people couldn't help but want to leave directly to eat because they were hungry.

"It's been a long time, from 9 o'clock to 12 o'clock now, there is no movement at all, at this time I feel like waiting for the child to be born."

In the crowd, a young man said gloomily.

After waiting for several hours, there was no news at all, and no one knew whether the lithography machine succeeded or failed, which made them very anxious and depressed.

"Someone's coming out!"

Beside the young man, someone let out an exclamation.

Moment!

Everyone was looking ahead.

At this time, Professor Chen, the president of Hantang Semiconductor, was slowly walking out with Lin Xuan and some people who looked very dignified.

"Mr. Lin, has the lithography machine been successfully developed?"

"Mr. Lin, what do you think of the words of Wang Shining, the president of Zhongxin International?"

"Mr. Lin, what do you think of the words of TSMC President Chen Damou?"

"Mr. Lin, are the test results out now?"

"Mr. Lin......"

As Professor Chen and Lin Xuan slowly came to the gate of Hantang Semiconductor, countless reporters raised their microphones and asked their questions.

But because there were too many reporters, a large number of questions were asked at the same time, and the scene was noisy.

"Everyone, please be quiet."

At this time, a man in a suit shouted, and then handed a microphone to Professor Chen.