At this time, the processing center has been vacated, and Lao Zhao is leading the apprentices to load the materials.

The tooling has been welded in the process of Ji Donglai's programming, and four or five students around him are holding small notebooks to record.

"Lao Zhao, you enter the program, and then simply start to get it, I'll squint, and you can call me if you have a problem!"

As the first product, Ji Donglai also attaches great importance to it, the whole process must be followed, simply lie upstairs with clothes, although the winter in Hebei is a little warmer than the northeast, but it is not a joke, Ji Donglai threw a little wood into the stove, leaned on the chair and fell asleep.

When I woke up again, it was the next morning, and Ding Aixing brought the buns.

"How's the processing? Is it going well?"

Getting up, Ji Donglai wiped his eyes and went downstairs directly.

"Yes, Master Zhao has been following! Boss, if I have time for you to learn how to code, this thing is still awesome, especially in machining centers, it's much easier than doing these boiler parts!"

Ding Aixing and Ji Donglai ate steamed buns while walking, looking at Ji Donglai's eyes full of eagerness.

When he tried to run the program last night, Lao Zhao found that Ji Donglai's program was very reasonable, and he only ran the datum at the beginning, and Ji Donglai had already completed the program in sections.

Lao Zhao was worried that the students would not understand, so he simply saved all the single-stage programs as separate, and changed the program every time he changed the processing surface.

Lao Zhao didn't close his eyes this night, and all the processing has gone very smoothly so far.

"Okay, you learn the basics with Lao Zhao first, and then find me, it's about to be a holiday, I'll teach you!" If we have the equipment, we will try to get started, remember that you must go on it now if there are conditions, and who can create conditions for you when there are no conditions?"

Swallowing the bun into his stomach in one bite, Ji Donglai looked at the processed parts inside through the glass, at this time he had already changed his face, he was processing the gap, and the semi-circular arc processing had to be changed.

The whole product has to be processed for two days, Ji Donglai's quotation to the elevator factory is 12,000, Zhu Cunxin did not make a counteroffer, after all, the actual processing is this price, and the price will only be reduced a little according to the center.

According to the agreement reached between Ji Donglai and the elevator factory, Ji Donglai directly counted the working hours, and then calculated the price according to the requirements of the elevator factory.

"I didn't see Ji Donglai, you still have this ability, you can process such a large workpiece, and there are capable people under you!"

Ji Donglai has been staring at the factory for several days, as the parts directly asked by the foreigner, Ji Donglai does not dare to be sloppy.

Tan Xiumei happened to drive to the factory, but she didn't see Ji Donglai in the processing plant, so she came to the mold processing factory.

When Ji Donglai directly put all the processing under the name of the outsourcing factory on the elevator factory, it can be regarded as an affiliation.

"There is a limit to the size of the machine tool, otherwise I dare to get the parts of the aircraft, and I still have good equipment and are comfortable!"

Holding his arms, Ji Donglai looked at the busy people in front of him, and there was a long-lost confidence in his eyes.

"That's right, it's a little bit of a little work in the past two days, but the technology content is very high, and some manufacturers here haven't studied it, look at it!"

Following Ji Donglai to walk around the mold factory, Tan Xiumei took out a drawing and gave it to Ji Donglai, Ji Donglai said hello to the workers, and then went out.

"Fins? This is also a thermal power plant thing, the thickness of the heat sink on it is a bit high, and there is a concave, the price cannot be low! Is it a lot?"

Looking at something all too familiar, Ji Donglai's eyes lit up.

The so-called fin is a kind of heat sink, which is usually used in large factories, and the heat dissipation efficiency of this heat sink is very high! Especially in thermal power plants, all the pipes of the fins are filled with hot steam.

After the annular fins, all the heat can be evenly dissipated, which is used by many domestic factories. Only a few places in the Northeast are still using cast iron heat sinks, which are not practical and massive, and are also very inconvenient to maintain.

"Can you really do it? If you can make a sample for me, and then I'll take it and show it to the customer, they want a lot of money right now!"

Hearing that Ji Donglai could do it, Tan Xiumei urged Ji Donglai to come early

Click to make samples, Ji Dong is not talking nonsense here.

Immediately took Tan Xiumei back to the riveting and welding workshop, drew a picture directly on the platform and asked He Xiaolong to weld a guide for himself, and by the way, he found two seamless pipes and measured the diameter.

The thick pipe can be put on the outside of the thin pipe, and then the guide and the thick iron pipe are welded together, and then the thin steel pipe is directly put on the lathe and slowed.

"Boom......

"Oh my God, that's how this thing works, it's that simple?"

Looking at Ji Donglai gradually moving the guide to the back, and spiral blades continued to appear on the seamless tube, Tan Xiumei's eyes widened.

When it was one meter long, Ji Donglai handed over the guide to He Xiaolong, took the carbon dioxide protection weld and clicked a few points at the root of the blade, and then took the fins off the machine tool.

"Take it away, boss, the process is not allowed to be passed on, this is the core process of the factory, rely on this to eat!"

Winking at Tan Xiumei, Ji Donglai was mysterious, Tan Xiumei rolled her eyes at Ji Donglai for the first time, and secretly said that it would not be difficult to get technical things, but it would not be difficult.

"Buzzing ......"

Ji Dong was raising the bar with Tan Xiumei over there, the mobile phone rang, Ji Dong took a look at An Jinda's phone and hung up directly, turned around and pulled Tan Xiumei to eat KFC.

It wasn't until about four o'clock in the afternoon that Ji Donglai saw off Tan Xiumei, and then returned to the mold factory, at this time An Jinda was sitting in the office with a depressed face.

"Donglai, what's going on? What's wrong with throwing my device out there?"

Seeing Ji Donglai come back over there, An Jinda immediately stopped, Ji Donglai gestured, took a sip of water and sat down.

"There's no place, didn't I originally want to make particleboard, I can't start work if you sell the equipment! This is not negotiated with the elevator factory, I now outsource them, I think about it, or make some limited hard-earned money!"

"The dream of being a boss is a bit unrealistic for me, after all, my background determines the future! This mold factory is not mine, all the equipment you see is foreigner, originally I thought you would make particleboard, then I will supply you with some goods! I'll forget if you sell your equipment, and it's just that the wood here is used as wood for heating!"

In the face of An Jinda, Ji Donglai did not show much on the surface except for disappointment.

As a former classmate, Anjinda would not have been able to enter the capital without Ji Dong, and originally hoped that the two of them would be able to support each other, but now Ji Donglai found that he was thinking too much.

It's only been a few days, and the other party is busy dissociating himself from him.

said that the particleboard equipment was invested in his own company, but the other party had secretly sold it, and he didn't care how much Ankinda invested on his side.