"You have to put up scaffolding inside, otherwise it's too hard to work!" Make a folded one, like this!"

On the platform, Ji Donglai wiped the beads of sweat on his forehead, and drew a simple folding platform on the platform, with a hinge in the middle of the pin.

At the end of the platform, the combination state is done, otherwise the following work is too laborious.

"The pin shaft is forty-five, let the scene dry immediately, and send it in the afternoon!"

Ji Donglai handed over the sketch to Gao Gaohe, and the other party immediately drove back to the factory, and the platform was completed in one afternoon, and the construction was carried out overnight with the flower in the evening.

The two sides of the thickness of 200 are beveled, and the bad pixel is 100 length, but the length of the repair must be 500 length, and there are slopes all around, so as to ensure that the deformation of the entire joint surface will not crack due to sudden changes.

"Mr. Ji, what do you cut inside? Angle grinder?"

The internal platform was done, it was already dark, and Ji Donglai followed the whole process.

The external three-pole natural gas spray gun has been ready, twelve meters high, the wind is whistling, Ji Donglai specially made baffles on both sides of the bad pixel repair surface to ensure that the flame can be sprayed vertically to the metal surface, and the flame needs to be preheated for three hours before the welding starts.

This kind of internal confined environment, whether it is cut or repaired, must not be fired, unless you look for death, once the oxygen leaks half a spark can ignite the person, and the internal bevel finally needs to be polished and trimmed by the cornea machine.

Of course, there are people who can take risks, and it is a matter of probability that something will happen with flame cutting, Ji Dong came to see everyone around him, and finally decided not to take risks.

"Don't worry, we use professional cutting equipment, that dirt method, the time is too slow, and it's not accurate! You'll find out if you come down with us later!"

During the whole repair process, Ji Donglai was worried that others would not cooperate well with Hehua, so he put on his goggles himself. Originally, Hehua was going to go on his own, where did Ji Dong come, it was his own baby pimple special welder.

With Ji Donglai waving his hand, his subordinates slowly put down the hanging basket, and Ji Donglai and Tian always followed the passage to the vicinity of the bad point.

"Weld this span here and adjust the angle......

Ji Donglai took the steel plate ruler to find the joint point on the arc surface, and then drew a line on the joint surface, and the tool holder holder was welded on both sides.

The reducer is equipped with a milling cutter, and Ji Donglai adjusts the cutter head to a 45-degree position.

"Mr. Ji, are you a magnetic drill?"

Looking at this strange organization under Ji Donglai, Mr. Tian's eyes were full of curiosity.

"The principle is similar, but there are differences, we are installing a milling cutter, which also needs to be operated by humans...... Xiaolong, you control the knife along this surface, remember not to cut too much at once, loop cutting! The next side cut is much better......

Pointing to the forty-five degree position, Ji Donglai started slot milling, the joint surface was burned, and the hardness was much harder than the surrounding metal, and Ji Donglai slowly controlled the cutter head.

At the middle dead pixel position, the cutter head obviously shakes a few times, and the feed speed increases.

On the return trip, Ji Donglai played the opposite, milled according to forty-five degrees, and gradually a smooth surface appeared in everyone's sight, and Ji Donglai handed it over to He Xiaolong.

"Didn't you see that Mr. Ji is so capable of doing it himself?"

Looking at Ji Donglai to proof, Mr. Tian's eyes were full of curiosity.

"Most of the technology in our factory is brought by Mr. Ji, and the process route is basically done by Mr. Ji, so we don't dare to hide it with the boss......

He Xiaolong lit a cigarette, put on gloves, turned around and said to Mr. Tian with a smile, Ji Donglai clicked on the other party's head.

"It's a lot of talk, hurry up, our special welder is waiting, don't you know?"

When Mr. Tian heard that many of the technologies that Ji Donglai came to the factory were formulated by Ji Donglai, his heart was full of doubts, and he unconsciously looked Ji Donglai up and down.

"No surprise, I'm from a working family! The one who gets the electricity outside is my father, an eighth-level electrician, and my grandfather is also an eighth-level worker! Under the training of two eighth-level workers, I am at least a seventh-level worker!"

"So don't worry about our professionalism, we are a team and no one is weak

, let's cooperate more in the future, and you'll know!"

One person is working on the scene, two people observe the surrounding environment, and there is also a person supervising the fluid valve, as for the electrical appliances, Ji Donglai has also arranged people, and no negligence is allowed.

It took two hours to break the defective surface, but in fact, Ji Donglai could directly use an angle grinder to cut it, and according to the techniques of several old workers under Hehua, it was completely able to meet the requirements.

Ji Donglai must let Mr. Tian see here that Ji Donglai's money is not easy, otherwise the other party will not be reconciled, and then he Hua, who had rested in the second half of the night, went below to check the progress, and Mr. Tian was so sleepy that he couldn't open his eyes.

"Mr. Tian, why don't you go back and rest first, the repair on our side is not so fast, it will take a few days, you can come back when you wait for our side to package, you can rest assured that the project is handed over to us, you also see that this money is not easy to make!"

Seeing that Mr. Tian's snot came out, Ji Donglai pretended to be very concerned.

"I'm sorry, my physique is really inferior to you, I'll report to you tomorrow with the boss, it's not easy, it's hard work......

Tightening his coat, Mr. Tian hurriedly beckoned the driver to drive him back to rest.

Ji Dong came over there and waved his hand, and beckoned a few of his partners to go down, and after a while, there was a buzzing sound of an angle grinder inside. Inside the closed tank, the sound was particularly harsh, and even though several people were wearing earplugs, it was still shocking enough.

The next day, Mr. Tian arrived at the scene at about 12 o'clock at noon, and Mr. Tian came with Tan Xiumei.

"Yo, Mr. Tan is back? I'll pick you up at the airport by phone!"

Looking at Tan Xiumei's big sunglasses, Ji Donglai came down from the ladder with a smile on his face, Tan Xiumei took off her glasses and looked around.

"Okay, I took on such a big project, Ji Donglai didn't see that you are not small! Is this your new worker?"

Looking at so many new faces at the scene, Tan Xiumei looked around with a cold face, Ji Donglai knew what the other party was thinking, no wonder he started to take over the maintenance of this factory without going through the other party.

"Gotta stay alive, just to test the team! The list you sent me is getting harder and harder, and I have to come to get the training! Besides, there are more and more challenging lists now, so we have to get the team up first!"

"They can't send it out, so that's why they found me, and I don't like to take it! If it weren't for your face, I wouldn't have done anything to fix the reactor with such a little money, do you see the pipeline over there? Acid-resistant tube, look at the money is good, it's not easy to take!"

"That line ......" QS

Facing the guide, Ji Donglai began to exaggerate the difficulty of the project, and Tan Xiumei's face improved.