As the high-energy laser continues to shoot, the metal powder is sintered layer by layer.

The laser sintering printer runs very fast, and it doesn't take long for a thin layer of models to appear on the printing platform.

Li Anchor glanced at the entire production area that was up and running again, this time not some, but all the printers were running, and he returned to the office directly.

Back in front of the computer, open the background of the note mall, count the new orders again, and deal with the chargebacks that just appeared. After processing these things, Li Anchor adjusted the number of prints in time.

Li Anchor then ordered a large number of consumables for printers on the Internet, and then searched for 3D scanners on the Internet, and then Li Anchor took a look at it and closed the webpage directly.

It's really that the price shown on it is too high, and the high one makes Li Anchor feel the urge to scold his mother.

So he gave up the idea of buying this thing in the near future, but he didn't throw this idea away, but just postponed it.

After finishing these, Li Anchor came out of the workshop, went to the bathroom in the park to wash his face and flush his feet, and then returned to the factory, and then did not care about all the machines in operation, he himself went directly to the back of the display cabinet.

Lying on the bed in the back, listening to the sound of the printer constantly running in my ears, I was blindfolded in some pain, and I don't know when I fell asleep in a daze.

I don't know how long it has been, Li Anchor, who was lying on the bed, finally moved, and his eyelids moved slightly, and he was about to wake up.

Li Anchor opened his eyes, touched his mobile phone and looked at the time, and found that it was already close to noon the next day, which really made him a little unexpected.

I thought he would be woken up by his own alarm clock, but it seems that the alarm clock he set is useless.

Sitting up from the bed, he shook his head vigorously, and wiped the eye droppings from the corners of his eyes with one hand, and his consciousness was really clear after doing this.

The sound of the printer running in my ears before going to bed has long been gone, and at this time, except for the sound of the switch and monitoring machine running not far away, the factory is extremely quiet.

After getting out of bed, I first ran around the factory and pulled all the blackout curtains open, and the sunlight finally shone in through the windows.

After looking at the brightness and darkness of the workshop, and feeling that there was no need to turn on the lights anymore, Li Anchor walked towards the laser sintering printer in a hurry.

When he came to the printer, Li Anchor first pulled up the transparent protective cover, and then looked towards the printing platform, only to see that the platform at this time was already full of printed parts.

Reached into the printing area, felt the surrounding temperature, and found that the inside of the printer had returned to room temperature.

When his hand touched the part, he didn't feel the temperature on it, Li Anchor knew that this should have been printed a long time ago, and the high temperature generated by laser sintering had already dissipated, and the time could be seen to be long enough.

Li Anchor operated a small forklift to lift out the printing platform full of parts, and then took the tool to break the parts off the printing platform one by one.

The printed parts are not too heavy, although they are all metal parts, but when Li Anchor prints, he uses lightweight metal powder.

The external fuselage, wings, landing gear and other things of the Yun-5 model aircraft were dismantled by him one by one and placed on the open space in front of him.

I picked up half of the printed wing, felt the weight of the lower wing in my hand, and pressed it on the wing, which seemed to be a natural one-piece wing.

Li Anchor found that it was not pressed, and the wings still maintained their original shape, which made him feel the strength of the printer, and this printer is very intelligent in materials.

Because the material of the wing, just by looking at it with the naked eye, it can be determined that this material is not the same as the previous printed engine.

In Li Anchor's view, the current wing should be an aluminum-based titanium alloy, which should be a lightweight alloy synthesized by the printer itself.

As for how the printer did it, this is not something that Li Anchor can understand at all, but the days will be long, and one day he will be able to understand the principle.

As for what he wants to do now, it is to synthesize his optimized wings, and when he first printed, he had already made up his mind, so he shot a total of two pairs of wings.

After all, he is not an expert in aircraft design, and he still has a lot of small problems or big problems that have not been discovered when he optimizes the wing.

But these are put in front of the plug-in, is this called a thing? It's not a problem at all, okay.

Through the synthesis of the wing, Li Anchor believes that he will be able to eliminate small problems or potential problems on the wing.

Then turn off the surveillance again, close all the curtains, and get ready for protection.

After getting ready, Li Anchor began to synthesize the two pairs of wings, this time the synthesis went smoothly, and there were no problems, and not long after, a pair of wings appeared in front of his eyes.

Li Anchor had already seen the magical scene in front of him, and he calmly picked up a wing and observed.

The wings were held in his hands, and they didn't feel heavier in weight than before, and Li Anchor felt as if they were a little lighter.

As for the appearance of the wing, it has become more harmonious and more in line with the science of aerodynamics.

This situation of developing towards the good side makes Li Anchor feel very good, anyway, it is an open life that doesn't need to be explained too much.

The successful synthesis of the wings made him very excited, and he couldn't wait to assemble the printed parts immediately and install the prepared mini engines on the Yun-5 model aircraft together.

As soon as this idea came to him, Li Anchor couldn't help it, but he didn't start assembling it immediately.

Instead, I took out all the things that had already been printed by the other printers and let the printer start printing again.

In addition to the laser sintering printer, after several other printers started running again, Li Anchor took a set of tools and began to assemble the newly printed Yun-5 body model.

All the parts of the body with a metallic luster were assembled by him one by one, and the mini engine that he had made before had already been moved to the side of the body.

At this moment, it is waiting to be assembled, and then it is loaded into the model airplane.

As for the internal operating system of the model aircraft, that is, avionics and other things, it is left over from Li Anchor's previous work on model aircraft, a very ordinary four-channel operating system.

Little by little, the body was installed by Li Anchor, and the parts on the ground continued to disappear little by little, and finally only some parts of the power system on the ground had not yet landed.