The day after the industrial exhibition, Fang Bai returned to the company and convened the production manager, workshop supervisors and team leaders to hold a production meeting.

Fang Bai sat on the main seat, smiled, and said: "In this seven-day industrial exhibition, our company has achieved complete success, and foreign countries have obtained orders for 10 pump trucks and 20 ground pumps; There are 120 ground pumps and 16 pump trucks in China.

26 pump trucks and 140 ground pumps are required to complete the order delivery within three months, and the company's production tasks will be very heavy.

With the opening of the market, the number of orders will be much more than usual, and everyone must be mentally prepared until the staff is expanded. ”

Fang Bai paused, and the participants applauded warmly, it's good to be busy, they have money for overtime.

Fang Bai's face changed, and he said solemnly: "There are many orders, but the quality must be strictly controlled, if the quality is not too hard, it is to destroy the company's reputation and kill the company." ”

The meeting was not long, Fang Bai just did ideological work for the production staff, and after ten minutes, the meeting ended.

110 million yuan and 10 million US dollars of contract amount, the cost is not much, and the gross profit is more than 100 million yuan.

The company got a deposit of tens of millions of yuan, and there was no shortage of money at all, and a large number of materials and production equipment were purchased.

The production pump truck had to be arranged to the new factory, and the old factory site was not enough to use.

After the meeting, Fang Bai went to the workshop to patrol.

While inspecting a welded structure of the floor pump, he found a very serious problem that stopped the construction workers and the workshop supervisor was also on site.

"To weld this structure, the welding wire used should be ER55-G, not ER50-6, is it not timely to replace the welding wire?" Fang Bai solemnly pointed out that all the problems are, he just used the gold finger to probe, and found that the weld turned red, indicating that it was unqualified, and looked at the welding wire manual on the wire feeder, and the welding wire used turned out to be ER50-6.

"Boss, it seems that you can also weld Q345B with this welding wire, right? The strength of the welds is about the same. The worker replied with a little nervousness.

"Whoever is the same as you can use it, call the welding engineer to come over." Fang Bai replied solemnly, "The process has already explained what welding consumables should be used, and what welding consumables should be used, and do not replace them without authorization."

If you feel that there is a problem, you should give advice to the supervisor and the welding engineer, and after getting the consent of the welding engineer, the process should be modified before doing it. ”

Under normal circumstances, Fang Bai would not be mad at the workers.

However, some workers do not even listen to the words of the supervisor, feel that the supervisor does not understand welding, feel that they have been welding for more than ten years, very professional, and do not follow the process documents for construction.

Anyway, it's an old fritter, and no one is afraid except the boss.

So, sometimes it takes a beating from the top to a stubborn worker.

Two minutes later, the welding engineer arrived at the scene.

Fang Bai harshly criticized: "Should ER55-G welding consumables be used for welding this structure?" Why is process execution not followed? ”

The welding engineer saw the boss furious: "Yes. ”

Fang Bai frowned and explained: "Then why use incorrect welding consumables, don't look at the strength is not much different, the problem is big, have you considered the use of our company's products?"

The vibration of the ground pump is very large during the working process, especially the important structure, which is prone to fatigue stress. We don't have a good way to eliminate welding stress now, so we must start from the welding consumables.

Although it is no problem to use ER50-6 welding for Q345B, it is not possible for our company's products, which directly affects the life of the weld, and I estimate that it will not take long for the weld to crack, not a strength problem, but due to fatigue stress.

The quality of the current domestic welding wire cannot meet the standard requirements at all, if it is an imported ER50-6, maybe it is no problem.

High-frequency vibration machinery, fatigue damage is one of the main causes of mechanical parts failure, you should pay attention to this.

We have a batch of products to export, the use of the environment or low temperature environment, all require the use of low temperature and high toughness welding consumables, you should pay more attention to this. ”

"Boss, it's my fault." After listening to it, the workers probably figured out that the boss was not mad for no reason, but knew welding technology very well, and thought that he had been a welder for more than ten years and knew how to weld, but in fact, some details were still not understood.

"Boss, I am also responsible, supervision is not in place."

"I'm responsible, too."

The welding engineer and the shop supervisor quickly admitted their mistake, after all, the boss was right.

"If the welding consumables are used wrongly, the roots will be directly cleaned by carbon explosion, the oxide layer will be polished off and then repaired, and there is really no way to repair it, so it will be scrapped directly." Fang Bai saw that the three of them had a good attitude of admitting their mistakes, but the one who should be held accountable was still the same, and said the solution, "After this batch of ER50-6 is used up, it will no longer be purchased and used, and all Q235B and Q345B welds use low-temperature and high-toughness welding consumables to avoid confusion."

The engineer modifies the process and usually supervises the use of on-site welding consumables. ”

The cost of ER55-G welding consumables is 1.5 times that of ER50-6, about 12 yuan a kilogram, and the cost of welding consumables does not cost much compared to the cost of the whole equipment.

Fang Bai is mainly worried about the quality of welding materials in this era, ER50-6 strength is no problem, but the weld plasticity is poor, the elongation does not meet the minimum requirement of 21%, if the current and voltage are larger, the weld is more brittle and easier to crack.

A welding machine can only be loaded with one coil of welding consumables, some welders are too lazy to replace the welding consumables, and it takes a few minutes to change the welding consumables.

In order to avoid welder mistakes, simply unify the requirements.

When the workers heard the boss say that they would all be repaired, they felt a little worried.

If you rework one, you can weld two.

But very helpless, who is to blame, only blame yourself for not picking it up, and the repair work has to be tossed for a week.

If you make a mistake this time, you will definitely be deducted from your performance salary, and the workshop supervisor will also be fined.

"Okay, I'll change the welding process right away." The welding engineer responded immediately.

Fang Bai nodded, and then left the welding station with his back hand.

After he left, the workshop supervisor glared at the welder: "It's just foolish, it's done in vain, and I'll be deducted from the bonus." ”

"I thought it could be used, and many factories use it like that." The worker argues that he is too lazy to change the welding wire.

The workshop supervisor sarcastically said: "Do you think that the boss doesn't think so, obviously the process documents are here, you have to do it according to your own ideas, you are a cow." ”

At this moment, the worker did not dare to refute, and could only blame him for his self-righteousness.

"Most of the company's processes, the boss has personally audited, the welding current and voltage must be within the range, not for the sake of fast and the current and voltage can be adjusted too large, don't think that the boss is young and does not understand these, people can see the problem at a glance, the boss is very capable." The welding engineer reminded the workshop supervisor and welder that he was also responsible for this matter and did not supervise it properly.

This time of criticism, the three of them suffered, although they did not deduct the money, but they were criticized, and they were also uncomfortable.

"Which welding is wrong, all of them will be repaired, don't take chances." The welding engineer reminds that when the two welding consumables are welded, there is no difference between the light and the surface of the weld.

"Hey, okay." The welder sighed and honestly picked the workpiece he had welded wrong, and the workshop supervisor asked next to him.

Fang Bai's side, patrolling the scene is also focusing on welding, after all, like their company's products, the welding process is the most, and it is also the most prone to problems.

In addition, there are outsourcing parts that are prone to problems, and he should also check the important outsourcing parts.

For quality inspectors, it is more troublesome to detect workpieces, but Fang Bai is much more convenient.

Check in seconds!

If there is any problem, it will be checked out at once, so that the quality of the company's products can be guaranteed.

However, as the scale of the company continues to expand, he cannot always do it himself, and can only carry out the final inspection after the overall product is assembled.

The most profitable project of the group at present is the machinery company, so he attaches great importance to it.

The second is the real estate company, the fifth phase of the Wencheng bright Oujiangting real estate has been sold, and the subscription rate has reached 99.5%.

After the cap, the company can make a pre-tax profit of at least 61 million yuan from this project, and after the shops and parking spaces are sold out, the pre-tax profit will be at least and at most 76.3 million yuan.

Here in Xinghai Mall, the net profit is about three million yuan a month, which is also a lot.

As prices continue to rise and people's incomes continue to rise, monthly profits will continue to rise.

But compared to machinery companies, the profits made by the two companies are indeed incomparable.

Machinery companies are accumulating, the market is opened, and a steady stream of money is made.

Of course, after the scale of real estate companies and Xinghai shopping malls expands, their earning power is not bad.

Now the real estate company has experience in operating real estate, and the next real estate will be a building building, which will develop hundreds of acres of land and thousands of houses at a time.

At the same time, the company continues to expand its scale, and intends to develop two real estate projects at the same time after the end of the year, and develop in multiple cities in the future.

In the past, there were no channels, but now after Xinghai Group becomes famous, it will be welcomed by the local government for investment.

Fangbai will adopt the future Wanda commercial real estate development model, that is, residential, office buildings, amusement centers, and hotels will be developed around Xinghai Plaza.

In terms of the speed of making money, real estate is still very fast, and then the money is transferred to technological development.

Although real estate has been criticized, if there is no unfinished building, it is not a problem to do more charity and have high-tech help endorsements.

People will think that the money earned by Xinghai Real Estate Company is invested in high-tech companies, and everyone is more tolerant.

Of course, no matter what kind of business you do, it is difficult to avoid someone hacking.

There will always be people who are jealous, no matter how well you do, or some countries don't want to see the development of Xinghai Group, they will inevitably want to engage in Black Xinghai Group.

Some people are blind, but the leaders above are not blind.

This is also why Fang Bai agreed to fire himself and make himself more socially influential.

Today, he represents not only himself, but also his family, all employees and their families across the Group.

News reports about him have been fermenting continuously during this time, and more and more people across the country know about Fang Bai, a young rich man, and know his miraculous entrepreneurial deeds.

Of course, it is not yet known to the whole people, after all, the dissemination of information in this era is relatively backward, and it is estimated that there are 40 to 50 million people, most of whom are people from Shencheng and Wencheng.

But at Jiaotong University, Fang Bai's deeds spread very quickly, and everyone usually discussed his affairs when they had nothing to do to see what big moves he had recently.

After learning about Fang Bai's latest news, Weng Lie, the president of Jiaotong University, was very shocked: God is really feeding him!

An exhibition earns tens of millions of dollars!

Tsk, that's amazing.

Fang Bai's classmates all know Fang Bai's latest news, and they usually pay attention to it, and as soon as there is new news, everyone will tell each other to discuss.

"The squad leader is Niu Bi, and he became famous all of a sudden, from the campus to Shencheng, and then to many provinces."

"He has also been published in the People's Daily, and it is estimated that the leaders of the organs and departments across the country will know about him, and it will be much easier to open up markets in other provinces in the future."

"We negotiated with various schools and colleges to open supermarkets, if it weren't for the banner of the class leader, where would it be so easy to negotiate. So, even if I don't care much about Hualian Supermarket, he has paved the way for us in front. ”

"Yes, or where is it so easy for the bank to be willing to give us a loan, is one million yuan enough, two million yuan is fine, recently the bank president personally came to the door to ask if he wanted to increase the loan."

"Of course, as long as we can keep up with the speed of expansion, the more the merrier. The squad leader said that if we don't expand rapidly, we will be flooded in by capital, and we will be under great pressure to compete. ”

"Hey, when I entered the school, I still wanted to mix up with the student union cadres in the school, and the squad leader had already dealt with the county leaders before entering the school, and now it is published in the newspaper, and the leader of the political F who deals with him is the big leader." Yang Tan was full of emotion, when he first entered the school, his goal was to be the class leader, but he couldn't even mix with a class committee.

And the squad leader that Fang Bai didn't look down on, the counselor stuffed it directly to him.

Now the class president is more effective than the president of the student council, and the principal is polite to him, not to mention the student council president.

Last semester, he finally joined the school's student union as an ordinary member, and the department boss asked him: "Mechanical class 3, Fang Bai's classmates?" ”

"It's roommates."

"That's very welcome!"

There is no specialty, and it depends on relationships to make up.

However, Yang Tan didn't dare to borrow Fang Bai's flag to do things now, he could understand the careful thinking of some students.

Now I feel that it doesn't matter if I am a student union cadre or not, rich is fragrant.

Tomorrow, but the warrant lottery, a few of their roommates are looking forward to it.

That night, they bathed, washed themselves, and waited for the third lottery. (End of chapter)