Today, the Beijing International Machine Tool Exhibition officially opened.

The exhibition was held in the Beijing International Exhibition Center, because it was the first time, the organizers also specially held a grand opening ceremony, which was attended by very heavyweight officials, guests, and executives of internationally renowned enterprises.

There are also many exhibitors, domestic machine tool manufacturing enterprises, as well as some enterprises related to the machine tool industry, the number of two or three hundred. There are also many foreign exhibitors, including several of the top ten internationally renowned machine tool manufacturers.

The whole exhibition center is very lively.

After the opening ceremony, the venue gradually became popular, the flow of people was weaving, there were managers of various enterprises, people who needed machine tools, there were also some scholars who studied machine tools, and some were technicians of various manufacturing enterprises, and even students from colleges and universities in Beijing, ordinary citizens in Beijing and so on.

There are many exhibitors and many booths.

Among these exhibitors, there is Zhang Jianxiang and their company, after all, it is a well-known old state-owned machine tool manufacturing enterprise in the north, and they also received an invitation letter.

Such a grand international machine tool exhibition, Zhang Jianxiang and they will definitely participate.

The exhibition area of each exhibitor is not small, because this is a machine tool exhibition, and the place is too small to even put the machine tool down, so there is also a wool yarn.

Zhang Jianxiang: Their exhibition area is more than 100 square meters, and there are several machine tools on display, including lathes, ordinary machine tools such as milling machines and drilling machines, and a CNC lathe in the most conspicuous position.

This should only be said to be a semi-finished lathe.

But he can't manage it anymore, Zhang Jianxiang knows that if there is no CNC lathe to support the façade, then his exhibition area is too shabby.

The CNC lathe under development is placed here, and a one-person high propaganda board is erected next to the CNC lathe, which is illustrated with the introduction of this lathe.

Zhang Jianxiang was in his booth and saw that the exhibitors around him, especially those foreign companies, were almost all CNC machine tools, and there were almost no ordinary machine tools, and he was very stressed. I thought in my heart, compared with the level of machine tool manufacturing in our country and developed countries, the gap is really big.

Under this pressure, Zhang Jianxiang knows that only by working hard, catching up, and narrowing the gap with them is the king.

Well, fortunately, the servo motor thing is perfectly solved, and it is still the world's most outstanding servo motor, and there will be many fewer obstacles to the development of their own CNC machine tools.

If it is really as Mr. Tang said, they can develop advanced industrial control chips within one or two years, then there will be a lot less obstacles on the road to the research and development of their CNC machine tools.

"Boss, look over there!"

His subordinates pointed to an exhibition area in the distance, which was the exhibition area of a foreign machine tool company, and they were all CNC machine tools on display, and one of them was processing some workpieces for the people next to them to see.

Zhang Jianxiang glanced at it enviously, and said secretly in his heart, one day, we can also develop and produce all kinds of CNC machine tools, which will not be worse than this foreign company.

Japan's Sanbayashi Group is also one of the exhibitors this time.

To be precise, Sanlin Motor, a subsidiary of Sanlin Group, participated in the International Machine Tool Exhibition, and exhibited various motors related to CNC machine tools in their booth, among which servo motors are the mainstay.

Masao Mitsui was there, talking to a Japanese man, judging from this situation, this Japanese man's position should be higher than that of Masao Mitsui, and he may be one of the heads of Mibayashi Electric.

Mitsui Masao said: "Your Excellency Inoue, the scale of this international machine tool exhibition in China is quite large, for us, this is an excellent opportunity, I have a hunch, there will definitely be a lot of machine tool manufacturers will take the initiative to order our motors." ”

"Yo Xi!" Inoue said happily, "Mitsui-kun, how was the last time you approached John Bruville of the DeMarker Group?"

Mitsui Masao said: "Just about to report to Your Excellency, John Bruville has personally agreed to order our motors, but in the end it was his boss who made the decision, and he has already sent the order application and related materials to his boss, this matter should not be a big problem, we can wait for good news." ”

"Yo Xi!" Inoue Taro was satisfied.

Masao Mitsui thought for a moment and continued, "However, I saw the people of Jiuzhou Industrial Co., Ltd., and they seem to be selling their motors to the Demark Group. ”

"Jiuzhou Industrial Co., Ltd., a small enterprise in Qingjiang City, Jiangnan Province, China, do they sell motors to the Demark Group?"

After speaking, Taro Inoue laughed, laughing so much that tears almost came out, and he quickly took out a handkerchief and wiped it gently, "Don't worry, such a small company is not worthy of being our competitor at all, what kind of motor can they make, there will be no threat to us." ”

"Hey!"

Masao Mitsui immediately nodded and bent over.

Taro Inoue was a little too arrogant, and as one of the heads of Mibayashi Electric, he didn't take the general enterprise into account at all.

He has always believed that their Sanlin motor products are the best in the world, and even the top motor companies in Europe and the United States are only basically equivalent to them, and it is difficult to beat them.

A small enterprise in Huaxia, where did he pay attention to it, he immediately laughed when he heard that Jiuzhou Industrial Co., Ltd. was selling motors to John Bruwell.

Whether their motors can be ordered by Demak Group will be known later, maybe not as optimistic as he thought, Jiuzhou Industrial Co., Ltd. has really become a strong competitor for them.

The Demark Group is also one of the exhibitors at the International Machine Tool Show.

There are several world-renowned machine tool companies such as Demark Group. Knowing that several of its competitors were participating in the machine tool exhibition, the Demark Group also paid more attention to it and sent an executive over.

The headquarters of the Demark Group in China is located in Shenhai City, and John Bluville also traveled from Shenhai City to the capital, and he is the specific person in charge of the Demark Group's participation in the International Machine Tool Exhibition, and the executive only came to see it symbolically.

As an executive of the DeMark, it was impossible for Kraft to arrange the exhibition himself, and everything was basically taken care of by John Bluvell until after the show began, when he came over to the booth to have a look.

After taking a look around the DeMark's booth and asking John Bruville some questions, Kraft was satisfied.

He also knows that this exhibition is a good publicity of Demak Group in China, with the acceleration of China's economic development, industrial strength and scale gradually improved, Huaxia is a huge market for CNC machine tools. The strategy of the Demark Group is to enter the Chinese market with some of its own medium and low-end machine tools.

After inspecting his exhibition area, Kraft said: "John, there is one thing you should know, according to very reliable information, our competitor Hamilton Machine Tool Group, they have ordered a very high-performance servo motor from a certain motor manufacturer, which is said to be the most advanced servo motor in the world, if this matter is true, it is too much of a threat to us." ”

Hearing this, John Bruville was shocked in his heart, is the world's most advanced servo motor?

Originally, the technical strength of Demark Group and Hamilton Machine Tool Group is about the same, and the opponent suddenly has such a good servo motor, so will the CNC machine tool produced by the opponent win in performance and surpass its own machine tool.

This is quite possible.

John Bruville's face was solemn, and suddenly, he thought of the introduction about servo motors that Tang Fei left on his desk, if that introduction is true, then the servo motors manufactured by Jiuzhou Industrial Co., Ltd. are definitely the best in the world.

No, absolutely impossible. John Bruwell immediately ruled this matter out of his mind, he didn't believe that a company in Huaxia could make such a good servo motor.

Maybe it is a powerful motor manufacturer in Europe and the United States, or a motor manufacturer in Japan, is it Sanbayashi Motor, is it that they have quietly successfully developed the world's best servo motor. John Bruville thought so in his heart.

"BOSS, I will immediately investigate this matter secretly, and I will get back to you as soon as possible. John Bruwer replied.

"Hmm. Clough nodded, and then said: "We need high-performance IGBT products on several advanced machine tools, and there is a company in the United States that has developed the fourth generation of IGBT, you go to contact this company in the United States to see if you can order their IGBT products." ”

"Okay, BOSS. John Bruville agreed.

………

Today, Tang Fei entered the exhibition relatively early, watched the opening ceremony throughout the whole process, and also saw the appearance of several heavyweight officials.

Seeing that this international machine tool exhibition is so grand and grand, my heart is full of joy all of a sudden. Last time at the industrial exhibition in Shenhai City, I received nearly 300 million orders, and this international machine tool exhibition, how many orders can I harvest.

Also, the task released by the system has entered the countdown, and the task must be completed with the help of this international machine tool exhibition, and its servo motor will enter the European and American markets and win orders from European and American companies.

"Boss, this exhibition is even grander than the last industrial exhibition. Wang Hailong said happily.

Tang Fei said: "Well, this is a good opportunity for us, let's go, let's go to our own exhibition area now." ”

"Boss, this way, come with me. Wang Hailong led the way in front, he came once, the location of the booth was personally selected by him, he was familiar with the way, and it didn't take long for Tang Fei to walk in front of the booth of Jiuzhou Industrial Co., Ltd.

As soon as he saw his booth, Tang Fei was obviously flustered, which was very different from what he imagined!

………

Today's three watches, the first one is sent!