Lin Qiangsheng and Yang Baoshu discussed the development of domestic car enterprises, Yang Baoshu sighed and said: "Since the opening of the country, I feel that foreign technology progress is so rapid, I saw the Japanese car production line on TV is very advanced, until I saw your production workshop with my own eyes to feel that we are really too far behind!" China can produce atomic bombs, hydrogen bombs, satellites, rockets, and fighter jets, why is this small car so backward, and the gap with foreign countries is so big! ”

Lin Qiangsheng said: "We are missing an important link in the modern production mode, that is, the innovation of process technology, science and technology are particularly prominent in the production of cars, and the advanced production technology is preferred to be used in the automobile industry is also the most!" ”

He continued: "The rise of automobile manufacturers led by Japan soon occupied an important share of the world's automobile market, especially 60%~70% of the automobile market in the United States is occupied by Japanese cars for a long time. ”

Lin Qiangsheng said: "We can also learn the development model of Japanese car companies, even if we can't learn the whole set, it is useful to learn a little skin." In a short period of time, whether it is the management system or the spirit of enterprise, we are not as good as others, and it is difficult to compare with the car companies that have developed for decades such as Europe, the United States and Japan, but only in the machinery and equipment can also have a hard time, and only in the production equipment is the fastest effect! ”

Yang Baoshu asked in surprise: "What kind of hard work method, the introduction of advanced production lines?" ”

Lin Qiangsheng nodded and said: "As far as I know, the automobile production line introduced by SAIC is the old equipment directly dismantled from the German factory, and that production line is already a technical product in the early 70s. It is already very backward, and such a start is much lower! ”

"Does Director Yang know about the second president of Toyota, Ishida Kezo?" Lin Qiangsheng asked.

Yang Baoshu said: "The president of the Japanese is the director and general manager of the Chinese factory, right? ”

Lin Qiangsheng nodded and said: "Ishida took over the position of president of Toyota Motor in 1950, and he was unique in the Japanese automobile industry and laid a very solid foundation for Toyota's later development.

I think he has a business theory, which is very correct. It is particularly important for the development of China's car industry and can give us some inspiration! ”

"What is the theory?" Yang Baoshu hurriedly asked, and the others were also very interested.

During his tenure, Ishida put forward the theory of equipment first, and he advocated that if there was excess money, it should be invested in equipment, and that it should not be improved by manpower, but by machinery. It is better to invest in manpower than to invest in equipment, and use equipment competition to subdue others. He promoted it at Toyota, and he had the idea of 'willing to spend money' on equipment. Toyota Motor realized his theory in 1959 during the construction of the Motomachi Plant, and thus became a decisive factor in Toyota's transcendent development at the beginning of the world's entry into the automobile age! ”

Yang Baoshu and his entourage listened quietly, and some workers also gathered.

Lin Qiangsheng continued: "Although Ishida's idea of retiring from the perspective of saving manpower input and replacing labor with machines is also of great significance, and he is willing to spend money on equipment technology and constantly update process equipment. As a result, automotive products are no longer limited to the level of artificial manufacturing.

The numerical control will make the quality of the car continue to improve with the improvement of the update accuracy of machinery and equipment. In the European and American automobile industry as a whole into a period of recession, Japanese automobile companies, especially Toyota, are improving equipment on a large scale, striving to improve production efficiency and machining technology, their cars continue to improve the quality, and soon occupy an important place in the world automobile market!

This shows that the importance of equipment is self-evident, and it is not an exaggeration to raise its status to the first position. That's one of my insights on developing an automotive business! ”

Yang Baoshu felt that Lin Qiangsheng's words were a little reasonable. Chengfei can make fighter jets, but it may not be possible to do it for the product of large-scale industrialization such as automobiles, and the difficulty lies in the equipment.

At this time, an old worker next to him said to Lin Qiangsheng: "Young man, you are talking about equipment, and you are going to make mistakes in the past." The old tradition of self-reliance cannot be lost! ”

Lin Qiangsheng said to the old workers: "Now is not the past, in the past we could build a car like the red flag, but what is the use of the red flag now?" ”

The old worker frowned and said: "Although it is not the past now, but we can't lose some old traditions, like you said that the equipment is important, but it also needs to spend a lot of precious foreign exchange!" ”

Yang Baoshu saw this old worker and introduced him: "Master Yun, this is Mr. Lin Qiangsheng, the chairman of Dongxing Group, and I invited him to visit the automobile factory we prepared this time. Dongxing is a shareholder of automobile companies such as Binqi and Harbin Motor, and also produces important auto parts such as automobile engines and transmissions, and is very famous in the domestic automobile industry! ”

He turned his head and said to Lin Qiangsheng: "This is Master Yun Ziqiang from our factory, an eighth-level fitter, I specially asked Master Yun to lead the assembly team to assemble that Jetta car!" ”

Lin Qiangsheng said in surprise: "As the saying goes, three points are in manufacturing, seven points are in installation, level 8 fitters, Master Yun admires it!" He forcibly saluted Yun Zi, and his tone and movements were very respectful of this old master.

The old man nodded, very satisfied with Lin Qiangsheng's attitude, the old man didn't pay attention to the dispute between the two just now, he said slightly humbly: "It's an exaggeration, if you can't make good spare parts, you can't install them well!" ”

"It's not an exaggeration at all, the eighth-level fitter proves that you are a master in every way!" Lin Qiangsheng said to Yun Ziqiang quite respectfully.

He has great respect for such masters, especially eighth-level fitters, and there are also such eighth-level fitters, eighth-level turners, eighth-level millers and other masters in the Dongxing Group, there are several, and there are many senior technicians from other enterprises in the city.

In industrial production, the status of such a master is very high. There is a saying, the fourth-level technician walks sideways, the sixth-level factory director is not false, and the eighth-level is Lafayette, such a master has a very high status in the factory, and it needs to be supplied, because at the critical moment, the company is counting on them to work, others can't do it, they can do it, and others can't process it.

And the master Yun Ziqiang in front of him turned out to be an eighth-level fitter, which made Lin Qiangsheng even more awe-inspired. At present, the high-precision equipment manufactured by Dongxing Group still has to be assembled by hand by senior fitters, and the machine cannot replace manual labor in this regard.

Fitter is not only assembly, such as turning, planing, milling, drilling, grinding, materials, heat treatment, processing technology, fixture design, etc. can be involved.

It is more difficult for fitters to do a good job, electric welding, wind cutting, marking, drilling, maintenance fitters, assembly fitters, drawing line fitters, mold fitters, senior fitters are required to have the electrician level of intermediate electricians, eight-level fitters are difficult to imagine how high the technology is, there is a treasure in the enterprise!

Moreover, looking at the spirit of Master Yun Ziqiang, Lin Qiangsheng felt that he would definitely design, not to mention drawing, and usually the big fitters should be proficient in the arrangement process, they are all masters of design and drawing in the machinery industry.

It is necessary to master the machining performance, cutting performance and production improvement and repair of various metal materials; Forging, casting, turning, milling, planing, grinding, boring, riveting, welding, sheet metal cutting and other types of work have a certain level or even higher! In terms of basic skills, they can reach a realm that ordinary people can't imagine, because what they play is the realm. The most important thing is that they all have a normal heart, do not coax, and are virtuous!

Yun Ziqiang saw that Lin Qiangsheng, a young man, was very polite, not as impetuous as before, and respected him very much, so the old man smiled and nodded, and also said a beautiful word, saying: "The Jetta car you made is good, and the assembly process is very good, you must have made great efforts in this regard!" ”

Lin Qiangsheng said with a smile: "I have made a lot of effort, that is, to divide a number of large projects into countless small projects, accurate to the individual in production, to carry out the quality responsibility system, and to supervise in place before leaving the factory, so as to ensure the low failure rate of the car as much as possible!" (To be continued.) )